iSR6200 Intelligent Storage Router Installation Guide - QLogic

CLog MessagesThis appendix provides details about messages logged to a file. (For details about viewing the router logs, see theiSR6200 CLI User’s Guide or the iSR6200 Router Manager User’s Guide.) The message log is persistent because it ismaintained across router power cycles and reboots.Information in Table C-1 is organized as follows:• The ID column specifies the message identification numbers in ascending order.• The Log Message column indicates the message text shown in the CLI or SANsurfer Router Manager router log.Note that:Log messages for the iSCSI driver module are common to both iSCSI ports. Log messages beginning with#0 denote iSCSI port 1 (GE1) and log messages beginning with #1 denote iSCSI port 2 (GE2). Log messages for the Fibre Channel driver module are common to both Fibre Channel ports. Log messagesbeginning with #0 denote Fibre Channel port 1 (FC1) and log messages beginning with #1 denote FibreChannel port 2 (FC2).• The Module Type column specifies the message reporting module, where: App = Application module FC = Fibre Channel driver FCIP = Fibre Channel IP driver iSCSI = iSCSI driver System = System moduleISR651101-00 G C-1