iSR6200 Intelligent Storage Router Installation Guide - QLogic

7–Removal and ReplacementPower and Cooling ModulesInstalling the Replacement PCMTo install a replacement PCM in the iSR6200 chassis:1. Before you insert the new PCM into the chassis, unlatch the lever on thenew PCM (see Figure 7-11.)Figure 7-11. Unlatching Lever on New PCM2. Insert the replacement PCM into the iSR6200 chassis. As shown inFigure 7-10, push the PCM straight into the chassis (1), and then make surethe PCM is properly seated into the chassis mid-plane by pushing the leverup and locking the latch in the up position (2). The PCM fans turn on and theLED should show an amber color.(1)(2)Figure 7-12. Inserting the Replacement PCM7-12 ISR651101-00 G