iSR6200 Intelligent Storage Router Installation Guide - QLogic

7–Removal and ReplacementiSR6200 Chassis Blades2. Insert the new blade into the chassis slot. Figure 7-8 shows how to push theblade straight into the chassis (1), seat the blade onto the chassis mid-planeby pushing the right side lever up, and then latching it into place (2). Theblade powers on and boots up.(1)(2)Figure 7-8. Inserting the New Blade into the Chassis Slot3. Wait until the blade finishes booting up.The system runs the POST. The heartbeat and system fault LEDs show theoperational status of the router. When the POST completes with no errors,these LEDs blink at a steady rate of once per second.4. Connect to the blade’s Ethernet management interface to your computer.5. Open a command line, change to the directory that contains your FRU file,and then enter ftp 10.0.0.1. For both the user name and password, useftp. Remember to enter the bin command before you enter the putcommand. For example:7-8 ISR651101-00 G