iSR6200 Intelligent Storage Router Installation Guide - QLogic

More documents

Recommendations

Info

7–Removal and ReplacementiSR6200 Chassis Blades2. Insert the new blade into the chassis slot. Figure 7-4 shows how to push theblade straight into the chassis (1), and then seat the blade onto the chassismid-plane by pushing up the right side lever and latching it into place (2).The blade powers on and boots up.(1)(2)Figure 7-4. Inserting the New Blade into the Chassis Slot3. Reconnect all cables to the new blade.Single-Blade InstallationFor a single-blade configuration, you must save the configuration of the originalblade using the fru save command whenever the blade configuration changes.You can save the configuration of the blade on a server you can later access touse for the replacement blade. After physically replacing the blade, you can thenuse the fru restore command to restore the saved configuration to thereplacement blade. This enables the replacement blade to retain all user-configuredsettings.The following sections show how to remove and replace a failed blade in asingle-blade chassis installation:• “Removing the Failed Blade” on page 7-5• “Installing the Replacement Blade” on page 7-77-4 ISR651101-00 G
7–Removal and ReplacementiSR6200 Chassis BladesRemoving the Failed BladeTo remove a failed blade from an iSR6200 chassis with a single blade:1. Prior to replacing the iSR6200 router blade, log out all iSCSI initiators fromthe iSR6200 blade you are replacing.2. Save the blade’s FRU using either SANsurfer Router Manager or the CLIfru save command. The following example shows how to perform thisusing CLI commands.iSR6200 login: guestPassword: ****** (default is password)******************************************************* ** iSR6200 ** *******************************************************iSR6200 #> blade 1iSR6200 #> admin startPassword : ******iSR6200 (admin) #> fru saveFRU save completed. Configuration File is iSR6200_FRU.binPlease use FTP to extract the file out from the System.3. Use an FTP client to get the FRU file from the iSR6200 blade. For both theuser name and password, enter ftp. Remember to issue the bincommand before you issue the get command. For example:ftp Connected to 220 (vsFTPd 2.0.5)User (:(none)): ftp331 Please specify the password.Password:ftp230 Login successful.ftp> bin200 Switching to Binary mode.ftp> ls200 PORT command successful. Consider using PASV.ISR651101-00 G 7-5
Page 1 and 2:
iSR6200Intelligent Storage RouterIn
Page 3 and 4:
Table of ContentsPrefaceIntended Au
Page 5 and 6:
iSR6200 Intelligent Storage RouterI
Page 7 and 8:
Page 9 and 10:
Page 11 and 12:
PrefaceThis user’s guide describe
Page 13 and 14:
PrefaceDocumentation Conventions•
Page 15 and 16:
PrefaceCommunications StatementsFed
Page 17 and 18:
PrefaceLaser Safety InformationVCCI
Page 19 and 20:
PrefaceTechnical SupportContact Inf
Page 21 and 22:
1 IntroductionThis chapter illustra
Page 23 and 24:
1-IntroductionPower and Cooling Mod
Page 25 and 26:
1-IntroductioniSR6200 Router Blades
Page 27 and 28:
Page 29 and 30:
Page 31 and 32:
Page 33 and 34:
Page 35 and 36:
2 PlanningDevicesThis chapter descr
Page 37 and 38:
2-PlanningiSCSI PerformanceBandwidt
Page 39 and 40:
2-PlanningPerformance TuningTable 2
Page 41 and 42:
2-PlanningHigh AvailabilityHigh Ava
Page 43 and 44:
3 InstallationThis chapter describe
Page 45 and 46:
3-InstallationInstalling the iSR620
Page 47 and 48:
Page 49 and 50:
Page 51 and 52:
Page 53 and 54:
Page 55 and 56:
Page 57 and 58:
3-InstallationInstalling New Firmwa
Page 59 and 60:
3-InstallationInstalling New Firmwa
Page 61 and 62:
4 ConfigurationThis chapter describ
Page 63 and 64:
4-ConfigurationEnabling Virtual Por
Page 65 and 66:
4-ConfigurationEnabling Virtual Por
Page 67 and 68: 4-ConfigurationEnabling Virtual Por
Page 69 and 70: 4-ConfigurationZoning Virtual Port
Page 71 and 72: 4-ConfigurationZoning Virtual Port
Page 73 and 74: 4-ConfigurationConfiguring Fibre Ch
Page 75 and 76: 4-ConfigurationConfiguring Fibre Ch
Page 77 and 78: 4-ConfigurationConnecting iSCSI Hos
Page 83 and 84: 4-ConfigurationControlling per-Host
Page 91 and 92: 5 Fibre Channel over IPFibre Channe
Page 93 and 94: 5-Fibre Channel over IPConfiguring
Page 111 and 112: 6 Diagnostics andTroubleshootingDia
Page 113 and 114: 6-Diagnostics and TroubleshootingLE
Page 115 and 116: 7 Removal and ReplacementThis chapt
Page 117: 7-Removal and ReplacementiSR6200 Ch
Page 121 and 122: 7-Removal and ReplacementiSR6200 Ch
Page 123 and 124: 7-Removal and ReplacementiSR6200 Ch
Page 125 and 126: 7-Removal and ReplacementPower and
Page 127 and 128: 7-Removal and ReplacementPower and
Page 129 and 130: ATechnical SpecificationsThis appen
Page 131 and 132: A-Technical SpecificationsiSCSI Ini
Page 133 and 134: A-Technical SpecificationsEnvironme
Page 135 and 136: BSimple NetworkManagement ProtocolS
Page 137 and 138: B-Simple Network Management Protoco
Page 161 and 162: CLog MessagesThis appendix provides
Page 163 and 164: C-Log MessagesTable C-1. iSR6200 Ro
Page 169 and 170:
C-Log MessagesTable C-1. iSR6200 Ro
Page 171 and 172:
Page 173 and 174:
Page 175 and 176:
Page 177 and 178:
Page 179 and 180:
Page 181 and 182:
Page 183 and 184:
Page 185 and 186:
Page 187 and 188:
Page 189 and 190:
Page 191 and 192:
Page 193 and 194:
Page 195 and 196:
Glossaryactivity LEDA port LED that
Page 197 and 198:
Page 199 and 200:
Page 201 and 202:
Page 203 and 204:
Page 205 and 206:
IndexAAC power 3-7activity LEDdefin
Page 207 and 208:
Page 209 and 210:
Page 211 and 212:
Page 213 and 214:
Page 215 and 216:
Page 218:
Corporate Headquarters QLogic Corpo
show all

iSR6200 Intelligent Storage Router Installation Guide - QLogic

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?