APC Symmetra RM 4â12 kVA UPS Installation Manual - APC Media

More documents

Recommendations

Info

CHAPTER 2: GETTING STARTEDBypass OperationIn addition to the automatic bypass, a maintenance bypass switch is provided with the UPS. Placing this switch inbypass mode connects the load equipment to the branch circuit, even if the UPS is turned OFF.When using the maintenance bypass, the input circuit breaker must be ON, or power will not besupplied to the Load screen.Follow the steps below to connect directly to the branch circuit (mains) via the automatic bypass.>Control LoggingStatus DisplaySetup DiagsAccessories Help>Turn Load OffDo Self TestSimulate Power FailGraceful Reboot ➪1. Use ‘ESC’ to view to Main Menu , and thenselect CONTROL.2. Select the UPS INTO BYPASS command.3. Confirm choice by selecting YES .4. You will see message . In addition, the greenLOAD ON and yellow BYPASS status indicators willbe ON.Graceful Turn OffStart Runtime Cal>UPS into BypassConfirm:UPS into BypassNO, ABORT>YES,UPS into BypassUPS LOAD IS BYPASSEDPress any key...6
CHAPTER 2: GETTING STARTEDLanguage SettingThe factory default language of the user interface is English. You can change the language by downloading newfirmware into the PowerView. French, German, Italian, and Spanish are available on the enclosed CD. Visit the APCweb site at http://www.apc.com for multilingual product documentation and firmware language support.To change the user interface language, perform the following steps.1. Remove the PowerView Display bezel from the front of the UPS.2. Disconnect the UPS cable from theRJ-45 port on the PowerView.Figure 3: Shown connected toSymmetra RM 2-6 kVA7
Page 1: APC Symmetra RM4-12 kVA UPSInstalla
Page 4 and 5: TABLE OF CONTENTSChapter 4: Install
Page 6 and 7: CHAPTER 1: SAFETY AND GENERAL INFOR
Page 12 and 13: CHAPTER 2: BASICSTable 3:Optional A
Page 14 and 15: CHAPTER 2: BASICSRear View Componen
Page 16 and 17: CHAPTER 2: BASICS12
Page 18 and 19: CHAPTER 3: SITE PREPARATIONShipping
Page 20 and 21: CHAPTER 3: SITE PREPARATIONElectric
Page 22 and 23: CHAPTER 4: INSTALLATION1. Remove th
Page 24 and 25: CHAPTER 4: INSTALLATION2. Assemble
Page 26 and 27: CHAPTER 4: INSTALLATIONWiring the U
Page 28 and 29: CHAPTER 4: INSTALLATION12. If requi
Page 30 and 31: CHAPTER 4: INSTALLATIONBlank cover
Page 32 and 33: CHAPTER 4: INSTALLATIONFinal Instal
Page 34 and 35: CHAPTER 4: INSTALLATIONReplacing In
Page 36 and 37: CHAPTER 5: SPECIFICATIONSOutput Spe
Page 39 and 40: TABLE OF CONTENTSAPC Contact Number
Page 41 and 42: CHAPTER 1: OVERVIEWPowerViewThis ma
Page 43 and 44: CHAPTER 2: GETTING STARTEDTurning o
Page 45: CHAPTER 2: GETTING STARTEDPowering
Page 49 and 50: CHAPTER 2: GETTING STARTEDFigure 5:
Page 51 and 52: CHAPTER 3: MENU COMMANDSCommand Ref
Page 53 and 54: CHAPTER 3: MENU COMMANDSDiagnostics
Page 55 and 56: CHAPTER 3: MENU COMMANDSSetup MenuT
Page 57 and 58: CHAPTER 4: MESSAGESTroubleshootingT
Page 59 and 60: CHAPTER 4: MESSAGESPowerView Messag
Page 61 and 62: CHAPTER 4: MESSAGESPowerView Messag
Page 63 and 64: CHAPTER 5: MAINTENANCEServiceIf the

APC Symmetra RM 4â12 kVA UPS Installation Manual - APC Media

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?

APC Symmetra RM 4â12 kVA UPS Installation Manual - APC Media