APC Symmetra RM 4–12 kVA UPS Installation Manual - APC Media

CHAPTER 5: SPECIFICATIONSOutput SpecificationsNominal Output VoltageOutput Power kVAOutput Power kW200, 208, 220, 230, 240 Vac; 50 or 60 Hz, 1 phase, 3 wire4 – 16 kVA2.8 – 11.2 kWLoad Power Factor 0 – 1Output FrequencyOutput Voltage RegulationSteady StateOutput Voltage RegulationTransient/DynamicRecovery TimeTotal Harmonic Distortion60 or 50 Hz nominal< ± 3% for no load to full load, min ac input to max ac, min dc to max dc,linear or non-linear load or any combination< ± 5% for 100% load application or removal, linear or non-linear load< 10 milliseconds (i.e. half cycle to steady state)< 2% for linear loads; < 5% for non-linear loads.Load Crest Factor Supported < 5% for 100% non-linear loads up to 5:1Overload Capacity 130% for 10 minutes. With N+1EfficiencyApproximately 90% @ full load—linear or non-linear loadsPhysical SpecificationsAudible NoiseDimensions (H x W x D)Weight – Fully LoadedHeat Dissipation (Full Load)< 62 dBA26.1 in x 18.9 in x 27.8 in (with bezel)(66.3 cm x 48.0 cm x 70.6 cm)Approximately 557 lb (133.6 kg)4246 BTUs typical – Batteries charged9664 BTUs typical – Batteries chargingCompliance SpecificationsVDE-GS Certifications EN 60950, EN 50091-1-1, EN 50091-2, IEC 60950, IEC 146-4,VDE 0558 and VDE 0805UL Listing UL 1778CSA Certification CSA 107.132