ELECTRODE INVERTER BOOSTER.PRO 170/210 - Tradekey

ELECTRODE INVERTER BOOSTER.PRO 170/210
REHM Online: www.rehm-online.de
REHM – Setting the pace in welding and cutting today

The lightest electrode inverter in the world in a new "outfit”:
Its appealing design and the unique operator interface
with rotary knob and push button control, make the
BOOSTER.PRO unmistakable. With its robust housing,
protection class IP23 and a maximum weight of 5,5 kg,
the BOOSTER.PRO is a reliable specialist for tough site
applications even under unfavourable conditions.
n The uncomplicated operation using a rotary knob for welding
current setting and a push button for the functions of TIG
and manual Stick electrode (MMA) welding is new. The active
function is indicated by an LED.
n The INTIG (Intelligent Ignition Energy) selects the correct
striking current automatically when electrode welding.
n Soft and precise arc striking is ensured by the Lift-Arc ignition.
n The REHM ELSA System (Electronic Stabilised System)
prevents weld drop-outs and fluctuations even with input
power cables as long as 100m (1,5 sq.mm).
n The Arc-Force and Anti-Stick functions prevent accidental
sticking and overheating of the electrode.
n A temperature controlled fan switch automatically optimises
the cooling power and reduces noise emissions and power
consumption.
n Suitable for use with a generator.
n Powerful electrode welding in the Booster function, welding
TECHNICAL DATA BOOSTER.PRO
Electrode Inverter
BOOSTER.PRO 170/210
of Aluminium electrodes and multi-component Bronzes with
the Arc-Force function.
n Comfortable TIG welding in DC operation through the gas
management function and the 4 step (latch-on/latch-off)
function. (BOOSTER.PRO 170 with Gas management option).
Control panel
REHM GmbH u. Co KG Schweißtechnik
Ottostraße 2 · D-73066 Uhingen
Telefon (07161) 30 07-0
Telefax (07161) 30 07-20
e-mail: rehm@rehm-online.de
Internet: http://www.rehm-online.de
n Rotate knob: setting of desired welding current.
n Press button: selection of either TIG welding or manual
electrode welding (MMA).
n Manual electrode welding in fuse-hold mode: prevents
triggering mains fuses.
n Manual electrode welding in Booster mode: Stick electrode
(MMA) welding with maximum power up to 150/170A and
55%/90% duty cycle.
n LED displays for the functions:
Functions TIG Lift-Arc process, Electrode Booster function,
Electrode fuse-hold mode.
n LED displays for fault identification:
Inverter fault and operating check lamp.
The BOOSTER.PRO is available complete in a practical
site-work case with welding cable, earth return cable, slag
hammer, wire brush and welding shield with glass.
Type BOOSTER.PRO 170 BOOSTER.PRO 210
Setting Range TIG Mode [A] 5–170 5–210
BOOSTER mode [A] 5–150 5–170
Fuse-hold mode [A] 5–140 5–160
Duty Cycle at 20 °C (40 °C) for imax TIG Mode [%] 50 (30) 50 (30)
BOOSTER mode [%] 55 (30) 90 (30)
Fuse-hold mode [%] 60 (35) 100 (35)
Welding Current for 100 % Duty Cycle TIG Mode [A] 135 (100) 175 (140)
at 20 °C (40 °C) BOOSTER mode [A] 120 (100) 160 (120)
Fuse-hold mode [A] 120 (100) 160 (120)
Mains Voltage at 50/60 Hz [V] 1x 230 1x 230
Open circuit voltage [V] 82 90
Fuses Fast/Delayed action [A] 16 16
Power factor [cos phi] 0,7 0,99
Insulation Class IP 23 IP 23
Weight [kg] 4,1 5,5
Dimensions LxWxH [mm] 245x130x175 310x130x175
Order ref. No. BOOSTER.PRO 151 3170 151 3210
BOOSTER.PRO with Gas management 151 3175
Subject to technical change. Additional equipment on the units illustrated available at an extra charge. All units bear the CE and S marks and meet standard EN 60 974-1.
The unit is equipped with a carrying strap. Thanks to its special design it can also be lifted by hand from the top. The BOOSTER RAMBO.KIT is also available for protected site use.
The standard for modern
welding and cutting
Your professional distributor:
REHM Service-Hotline ☎ 07161/30 07 77 0 71 61/30 07 66 2005 ©
MetaCom Stand 07/2005 – 6000