SLIM BODY FLAT RIBBON IDC CABLES - Samtec

F-213(2,54 mm) .100"IDMD–24–S–12.00–GIDSS, IDSD, IDMS, IDMD SERIESSLIM BODY FLAT RIBBON IDC CABLESSPECIFICATIONSIDSS, IDSDFor complete specifi cationssee www.samtec.com?IDSSor www.samtec.com?IDSDInsulator Material:Black Glass FilledPolyesterPlating:Au over 50µ" (1,27 µm) Ni orSn over 100µ" (2,54 µm) Cuor 50µ" (1,27 µm) NiWire:28 AWG 7/36 stranded TinnedCopperTemperature Range:-20°C to +105°C(Rainbow Cable)-40°C to +105°C(Gray Cable)Contact:BeCuCurrent Rating:1A per contactContact Resistance:15 mΩLead Size Range:(0,56 mm) .022" SQ to(0,71 mm) .028" SQLead Insertion Depth:(5,59 mm) .220" to(6,22 mm) .245"Insertion Force:(Single contact only)4 oz (1,11 N) avg.((0,64 mm) .025" SQ probe)Withdrawal Force:(Single contact only)3 oz (0,83 N) avg.((0,64 mm) .025" SQ probe)RoHS Compliant: YesSPECIFICATIONSIDMS, IDMDFor complete specifi cationssee www.samtec.com?IDMSor www.samtec.com?IDMDInsulator Material:Black Glass FilledPolyesterPlating:Au over 50µ" (1,27 µm) Ni orSn over 100µ" (2,54 µm) Cuor 50µ" (1,27 µm) NiWire:28 AWG 7/36 strandedTinned CopperTemperature Range:-20°C to +105°C(Rainbow Cable)-40°C to +105°C(Gray Cable)Terminal:Phosphor BronzeCurrent Rating:1A per contactRoHS Compliant:YesNote:This Series is non-standard,non-returnable.Mates with:TSW, MTSW, TSM, EJH,PHT, HMTSW, HTSW,HW, DW, EW, ZW, MTLWIDSD Mates with:TST, HTST, ZST,BST, EJHIDM= Standard Tail Male PlugIDS= SocketDOUBLEFull size (72 positions):(92,71) 3.650Less than 72 positions:No. Positions/row x (2,54) .100 + (1,50) .059SINGLEFull size (36 positions):(91,69) 3.610Less than 36 positions:No. Positions/row x (2,54) .100 + (0,48) .019(2,54).100TYPESTRIPDOUBLEFull size (64 positions):(82,55) 3.250Less than 64 positions:No. Positions/row X (2,54) .100 + (1,68) .066SINGLEFull size (32 positions):(81,53) 3.210Less than 32 positions:No. Positions/row X (2,54) .100 + (0,71) .028(0,46).018x(0,48).019(2,54).100–02 thru –32–02 thru –36ROWOPTIONS= SingleD= Double(Color codedcable N/A for31 thru 36pins/row.See –Goption.)IDMS(Single)(0,48).019IDSS(Single)(0,76).030SQ(2,54).100(For square or long tail see HCMX Series)WWW.SAMTEC.COM(3,18).125(9,27).365REFNO. PINSPER ROWIDMD(Double)(6,10).240MAX(5,08).200(2,54).100IDSD(Double)(5,08).200(2,54).100ENDAS SEM BLY–S = SingleEndSocket or Male Plug on one end–D = DoubleEndSocket or Male Plug on each end–T = TransferEndMale Plug on one end with socket onother. Begin part number with IDM.ALSO AVAILABLEMolded-To-PositionIDC Assemblies• Low Profi le• Skinny side locks• Dual beam contacts• Single and double row• (6,35 mm) .025"square and(5,84 mm) .230"length tailavailableCallSamtecfor HCXXSeries.

IDSD–05–D–04.25–S02IDSD–24–S–05.00ASSEMBLEDLENGTH– “XX.XX”= Assembled LengthAssembled Length inINCHES (± 1 /8" )(2 inches minimum)(0,64) .025SQ(5,84).230OPTIONPOLARIZING KEYOptional polarizing key foruse with IDSS & IDSDSeries. Also polarizesSSW, SSQ, ESW & ESQSeries. Black HighTemperature Ther mo plas ticOrder: Part Number PK-01-06(Available in wheels of six each)EJECTOR HEADERS& LOCKING CLIPSLOCKINGCLIPPCBOARDIDSS or IDSDSTRIP ASSEMBLYSee TSW Series..025" SQTERMINALSTRIP (TSW)• Ejector headers• Locking clipsSee EJH Series.–T–C–AStandard plating is selectivegold over BeCu contact for IDS;Selective gold over phosphorbronze for IDM.72= Tin Plating(Both ends)=Tin IDM10µ" (0,25 µm) Gold IDS(-T End Assembly Required)10µ" (0,25 µm) Gold IDM= Tin IDS(-T End Assembly Required)–P “XX”=Polarized04027103 01Specify “XX” as position. ForDouble the same position willbe polarized on both ends.(Not available on IDM or EDM,unless transfer, then only thesocket is polarized.)–G= Gray CableSpecify –G for Gray cable. Graycable has one red edge. IDSSand IDMS uses .100" centerlinecable. IDSD and IDMD uses.050" centerline cable. Cable is28 AWG 7/36 copper wire.Standard cable is same asabove except color coded.123–ST “X”= Stripped & TinnedSpecify Suffi x from table.All dimensions are ± 1/16".Not available in 28 positions and higher.–ST8–ST4–ST2–ST31/8" (3,18)1/4" (6,35)1/2" (12,70)3/8" (9,53)–B “XX”= BreakoutSpecify “XX” as number ofconductors to be broken out.“XX”5"max.2"min.Breakout starts with Number 1lead indicated by brown wire orred stripe. Shown on top side. 5–RW= Reversed Wiring#1 wire opposite position #1.46“XX” ± 1 ⁄8"–S “XX”= Daisy Chain Single2"min.4" minimumWhen mating double rowconnector with two single rowconnectors, the outer mostsingle will be connected toConductor #1 and the insidesingle to Conductor #2.“XX” ± 1 ⁄8"Single RowConnectors(IDSS)Outer Most–D “XX”= Daisy Chain, Double2"min.4" minimumDouble RowConnectors(IDSD orIDMD)Outer Most–W “XX”= Wiring ReversedDaisy Chain, SingleSame as –S “XX” except outerstrip connected to Conductor#2 and inside strip connectedto Conductor #1.777–R= Reversed–M= Middle ReversedRequires –SXX, –WXX or –DXX–O= Outside ReversedRequires –SXX, –WXX or –DXX888WWW.SAMTEC.COM