Owner's manual - Electric bikes & folding bikes

More documents

Recommendations

Info

owner's <strong>manual</strong>8.5 BrakesCheck cables or oil pipes for signs of wear and fraying. Ifyour A2B is equipped with hydraulic disc brakes additionalycheck for signs of oil leakage.Squeeze the brake lever firmly and check for properbrake function.Ensure rotors are free of foreign substances and oils.Brake pads should never be worn down to their limit,replace as necessary.Should your brake pads appear to be worn down or yourbrakes are not as responsive as they used to be, ask yourUltra Motor dealer to check and replace brake pads.Brakes lose effectiveness when wet.Avoid riding in wet weather. If it is unavoidable, rememberthat stopping your A2B will require extra distance.Ride more slowly, keep a greater interval between yourselfand other traffic, and begin braking sooner than normal.Failure to take these precautions could lead to an accidentcausing serious or fatal injury and/or property damage.If you are uncertain about any aspect of the brakeoperation under any condition, ask your Ultra Motor dealer.Brake disks and brake linings must be free of oil andgrease.8.6 TiresCheck tiress for any damage, cracking, unusual orexcessive wear. The tire should be properly seated inthe rim and the fit of the tire bead in the rim should beperiodically checked. Check for foreign objects in the tiretread and that the valve stem is straight in the rim.Damaged or worn tires should be replaced immediately.Take your A2B to an Ultra Motor dealer or a qualifiedbicycle mechanic to repair and/or replace your tires ifnecessary.In the unlikely event of having a flat tire you need to knowthe correct procedure for removing and re-installing thefront or rear wheel.The tire must have at minimum a positiv profil of 1 mmby law.27
8.7 Removing and re-installing wheelsRemoving front wheel1. Release the front hubquick release by rotatingthe quickrelease lever away fromthe hub until it is fully open.2. Turn the adjusting nut onthe opposite side of thehub from the quick releaselever ANTI-CLOCKWISE untilthe nut and quick releaselever body clears thesafety protrusions on thefork tip.3. The front wheel cannow be removed form thebike.Re-installing front wheel1. Position the wheel in thefront fork so that the quickrelease lever is located onthe left side of the frontfork.2. Move the quick releaselever to the OPEN position(lever curves away fromthe hub) and position thewheel in the front fork sothat the axle is located inthe fork drop-outs.28
Page 1 and 2: BA228114
Page 4 and 5: owner's manualContents1.0 Introduct
Page 6 and 7: owner's manual2.0 Important informa
Page 8 and 9: owner's manual1.2.3.4.5.6.7.8.9.10.
Page 10 and 11: owner's manual4.0 UnpackingNOTE: Yo
Page 12: owner's manual4.4 Installing the pe
Page 17 and 18: Remember that there are power cut-o
Page 19 and 20: 5.6 Luggage CarrierYour A2B equippe
Page 21 and 22: 6.0 Battery use, storage and dispos
Page 23 and 24: • The Indicator LED will illumina
Page 25 and 26: Charging instructions for storageBe
Page 27 and 28: Check your A2B before every ride.Do
Page 29: 8.0 MaintenanceHave your A2B checke
Page 33 and 34: Removing rear wheel1. Ensure that t
Page 35 and 36: 9.0 CleaningRubber and plastic part
Page 37 and 38: 3411.0 Technical InformationGeneral
Page 39 and 40: 2.3.6 any modification, alteration
Page 41: Ultra MotorUltra Motor USA 1661 Ten

Owner's manual - Electric bikes & folding bikes

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?