Raised Air Intake Installation Instructions Discovery II

INSTRUCTIONS: RNA1013IT H E S P E C I A L I S T S I N L A N D R O V E R S • U S ARaised Air Intake Installation InstructionsDiscovery IIAir Intake CapAir Intake PipeGasketHose ClampFlexible HoseRigid PipeThe benefits of a raised air intake are to ensure a cleaner airsupply in dusty or dirty conditons.1 2 31) Remove the left front outer front wing panel by removing all screws along the top, the inside of the door, and around the headlamp assembly as shown above.2) Disconnect the headlamp, turn indicator, and side lamps so that the fender may be completely removed.3) First remove the plastic cowl from the inner wing by breaking off the two fixing bolts. Install the air intake pipe onto the vehicle, fitting it into the upper cavityof the inner wing so the vertical part of the pipe follows the windshield line. Attach the air intake pipe to the rain gutter as shown. Then attach the flexible hose, asshown above, to the rigid pipe using the supplied hose clamp. Feed the flexible hose through the existing hole in the wheelarch assembly. Fit the rigid pipe and attachinto the air cleaner housing by using the sealant and 6mm bolts provided.44) Use MANTEC’s template as shown on page two to cut the fender hole. Be sure to thoroughly tape off the template to protect the paint around the hole. Make sure tofirst cut conservatively inside the trim line and fit several times until the fender is snug to the pipe with room for the supplied gasket.5) To finish, attach the air intake cap with the mesh face directed toward the rear of the vehicle, and attach by using the self-tapping screws provided.Page 1 of 21 802 879-0032or (800) 403-7591 • Fax: (802) 879-9152email@roversnorth.com • www.roversnorth.comRovers North, Inc. • 1319 VT Rt. 128 • Westford, Vermont • 05494-9601 USA

INSTRUCTIONS: RNA1013IT H E S P E C I A L I S T S I N L A N D R O V E R S • U S ADiscovery II Left Hand Fender (Wing)Template By MantecFoldFoldPage 2 of 21 802 879-0032or (800) 403-7591 • Fax: (802) 879-9152email@roversnorth.com • www.roversnorth.comRovers North, Inc. • 1319 VT Rt. 128 • Westford, Vermont • 05494-9601 USA

T H E S P E C I A L I S T S I N L A N D R O V E R S • U S AInstructions QuestionnaireWe rely on our customers to help us continually improve our instruction sheets. Please FAX or mail any comments, questions, orideas for improvements you may have.Send To: Rovers North1319 Vermont Route 128Westford, VT 05494or Fax: 802-879-9152Your Name: _____________________ Phone #: ________________Address: _____________________ Email Adrs: _____________________________________Instruction part number (top right corner) or description of what instructions are: ________________________________Overall, how would you rate the quality of this set of instructions? (please circle one):Poor Fair Good Very Good Excellent1 2 3 4 5 6 7 8 9 10Ideas, Comments, or Corrections (please include specifics, such as page number, or step number):__________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________THANK YOU!1 802 879-0032or (800) 403-7591 • Fax: (802) 879-9152email@roversnorth.com • www.roversnorth.comRovers North, Inc. • 1319 VT Rt. 128 • Westford, Vermont • 05494-9601 USA