Gemu Type 695 Diaphragm Valves - Tri-Canada

DescriptionThe type 695 is a compact valve with many features which make itideal for pharmaceutical and bio-processing applications.SanitaryDiaphragmValvePneumatically operatedStandard Features, Compact design, Sanitary internals, FDA compliant diaphragms316L stainless steel body®Triclamp , O.D. Tubing, ISO, and DIN end connections, Sizes 1/2” - 2”Available Options,Handwheel, manual overrideElectrical limit and proximity switchesVisual position indicatorPneumatic and electro-pneumatic positionersStoke limitersSpecial connections® ® ®Hose barb, tube extensions, Swagelok , Cajon VCR , Ingold , andothers available upon request.FabricationsCluster valve assemblies for both horizontal and vertical orientations,and custom fabrications upon request.Materials® ® ®AL-6XN , Hastelloy , Titanium , and others available upon request.Typical Applications, Pharmaceutical manufacturing, Bioprocessing, Cosmetic, Brewery Service, Food and Beverage, Semiconductor, High Purity ChemicalsType 695105

Type 695 Technical DataMax permissible working temperature:176°F (depending on diaphragm and body materials).The valve will seal against flow in either direction up to fullworking pressure.Control MediumMin. Required control pressure: 45 psiMax. Permissible control pressure: 90 psiMax. Permissible temp. of control medium: 104°FActuator volume: 1/2”-1” 9.2 cubic inches1 1/4” - 1 1/2” 21.4 cubic inches2” 67.1 cubic inchesBody ConfigurationRef.no.Diaphragm materialRef.no.2-way valve body2-way angled valve bodyDE2nd generation, modified Teflon® withEthylene-propylene backing 2-piece moldedclosedTFM/EPDM5EConnectionDINDIN 11850/Series 1DIN 11850/Series 2DIN 11850/Series 3Butt weld O.D. TubingSizes 1/4-3/8” 20 gauge .035” wallSizes 1/2-3” 16 gauge .065” wallSizes 4” 14 gauge .083” wallISOSchedule 10 pipe®Tri-clamp®O.D. Tubing by TriclampExtended O.D. Tubing®Extended O.D. Tubing by TriclampBody materialInvestment cast bodyStainless steel 316 L 1.4435 (BN2) Fe 0.5%Stainless steel 1.4539 (UNS N 08904)Forged BodyStainless steel 316 L 1.4435 (ASTM A 182)Stainless steel 316 L 1.4435 (BN2) Fe 0.5%Machined blockStainless steel 316 L 1.4435 (ASTM A 479)Special versions(Consult factory for special material reference numbers)Ref.no.016171859606380939495Ref.no.3233404241912nd generation, modified Teflon® with Siliconebacking 2-piece molded closedEthylene-propylene Rubber for saturatedsteam max 302° FEthylene-propylene Rubber for saturatedsteam max 302° F®2nd generation, modified Teflon withEthylene-proplylene backing (2-piece)®2nd generation, modified Teflon withEthylene-proplylene backingControl functionNormally closedNormally openDouble actingSurface finishSpecial VersionsSpecial versionsTFM/VMQEPDMEPDMTFM/EPDMTFM/EPDMAll diaphragms listed conform to the FDA code of Federal Regulations paragraph177.2600 of section 21.BPESurfaceRa Average[Note (1)]Ra Maxµ-in. Designation µ-in. µm µ-in. µm32 Mechanical25 Mechanical SFV3 25 0.625 30 0.75020 E-pol SFV6 20 0.500 25 0.62520 Mechanical SFV2 20 0.500 25 0.62515 E-pol SFV5 15 0.375 20 0.50011 Mechanical SFV1 15 0.375 20 0.50010 E-pol SFV4 10 0.250 15 0.375GENERAL NOTE: All Ra readings are taken across the grain.NOTE: (1) The average Ra is derived from two readings taken at different locations.Ref.no.1235S13165052Ref.no.3150215081507153715361516Ref.no.UXXXXOrder Example -695 015 D 80 40 13 1 1537Type of valve-695Size DNBody configurationConnection (valve body)Body materialDiaphragm materialControl functionActuator sizeLocking devicePipe main sizePipe main connectionSurface finishSpecial versions (XXXX)106015D8040131VALVES, ACTUATORSAND CONTROL SYSTEMS3800 Camp Creek Parkway • Building 2600, Suite 120 • Atlanta, GA 30331 • Phone (404) 344-8970 Fax (404) 344-9350 • info@gemu.com • www.gemu.com1537

Control Pressure (psi)Control Pressure (psi)Type 695 Technical DataControl function 1 Control function 2 Control function 3Size(In.)Size(mm)BodyConfigurationD= straightthroughWorking pressure (psi) Working pressure (psi) Working pressure(psi)EPDM,EPDM,EPDM,Viton, Silicon Teflon Viton, Silicon Teflon Viton, Silicon TeflonCv-value (gpm)ISOConnectionsO.D.TubingWeight(lbs)1/23/411 1/41 1/22152025324050DDDDDD0 - 1500 - 1500 - 1500 - 1500 - 1500 - 1500 - 900 - 900 - 900 - 900 - 900 - 900 - 1500 - 1500 - 1500 - 1500 - 1500 - 1500 - 900 - 900 - 900 - 900 - 900 - 900 - 1500 - 1500 - 1500 - 1500 - 1500 - 1500 - 900 - 900 - 900 - 900 - 900 - 9012.315.231.650.358.574.95.912.313.529.346.867.94.64.64.69.712.317.9All pressures are gauge pressures when applied upstream . The C v values vary due to differences in valve construction (i.e., Port size, body material, diaphragm material, etc.)Control function 1 (1/2” - 2”)Control function 2+3 (1/2” - 2”)9090756075604545303015Given control pressures apply to max. Stroke of valve.Values are lower for lower strokes.15The values shown relate to control function 2 (with lifting spring). For controlfunction 3 (without lifting spring) control pressure is approx. 1 bar lower.15 30 45 60 75 90 105 120 135 150Operating Pressure (psi)15 30 45 60 75 90 105 120 135 150Operating Pressure (psi)VALVES, ACTUATORSAND CONTROL SYSTEMS3800 Camp Creek Parkway • Building 2600, Suite 120 • Atlanta, GA 30331 • Phone (404) 344-8970 Fax (404) 344-9350 • info@gemu.com • www.gemu.com107

Type 695 Dimensional Data1Take Out Dimensions for Standard ConnectionsCon. Ref. No. (59) (80) (94) (93) (95)Size DN Units Ød s L1 L2 L3 L4 L51/2 15 mm 12.70 1.65 120.00 101.60 184.15 110.80 142.88in 0.500 0.065 4.724 4.000 7.250 4.362 5.6253/4 20 mm 19.05 1.65 120.00 101.60 190.50 110.80 146.05in 0.750 0.065 4.724 4.000 7.500 4.362 5.7501 25 mm 25.40 1.65 120.00 114.30 203.20 117.15 158.75in 1.000 0.065 4.724 4.500 8.000 4.612 6.2501 1/2 40 mm 38.10 1.65 153.00 139.70 234.95 146.35 187.33in 1.500 0.065 6.024 5.500 9.250 5.762 7.3752 50 mm 50.80 1.65 173.00 158.75 266.70 165.88 212.73in 2.000 0.065 6.811 6.250 10.500 6.531 8.375L1 = Connection Code 59 = Standard butt-weldL2 = Connection Code 80 = Standard clampL3 = Connection Code 94 = Standard butt-weld extension (AWF)L4 = Connection Code 93 = Standard clamp X butt-weldL5 = Connection Code 95 = Standard clamp X butt-weld extension (AWF)Drain AnglesSize DN Degrees1/2 15 46°3/4 20 55°1 25 60°1 1/4 32 65°1 1/2 40 65°2 50 70°Drain angles are for BS O.D. Tubing only.Optional Spigot DimensionsConnection Ref. No.Size1/2”3/4”1”1 1/4”1 1/2”2”DN15202532405060 0 16 17 18 37L 1 d s d s d s d s d s d12012012015315317321,326,933,742,448,360,31,61,62,02,02,02,318 1,5 1822 1,5 2228 1,5 2834 1,5 3440 1,5 4052 1,5 521111111923293541531,51,51,51,51,51,5202430364254222222--25,033,738,051,0s--1,21,21,21,2DimensionsCF 1 CF 2, 3Size DN Units A A1 F G ØB1/2 15 mm 146.0 130.0 65.5 G1/4 125.0in 5.75 5.12 2.58 4.923/4 20 mm 146.0 130.0 65.5 G1/4 125.0in 5.75 5.12 2.58 4.921 25 mm 146.0 130.0 65.5 G1/4 125.0in 5.75 5.12 2.58 4.921 1/4 32 mm 199.0 176.0 100.5 G1/4 155.0in 7.83 6.93 3.96 6.101 1/2 40 mm 199.0 176.0 100.5 G1/4 155.0in 7.83 6.93 3.96 6.102 50 mm 245.0 208.0 121.5 G1/4 210.0in 9.65 8.19 4.78 8.27108VALVES, ACTUATORSAND CONTROL SYSTEMS3800 Camp Creek Parkway • Building 2600, Suite 120 • Atlanta, GA 30331 • Phone (404) 344-8970 Fax (404) 344-9350 • info@gemu.com • www.gemu.com

Type 695 Spare PartsITEM12346781012PARTValve BodyDiaphragmCompressorQuadringMembranePlateSpringSpringActuatorDomeSocket-HeadBolt13141516181921222526293031WasherMembraneSpindleActuatorBaseSocket-HeadBoltWasherLocking NutWasherCapSpringCapPinStemVALVES, ACTUATORSAND CONTROL SYSTEMS3800 Camp Creek Parkway • Building 2600, Suite 120 • Atlanta, GA 30331 • Phone (404) 344-8970 Fax (404) 344-9350 • info@gemu.com • www.gemu.com109