Catalogue 2013 - Bürkle GmbH

LiquoFill filler for fluidsThe LiquoFill fillers were specially developed for exactmetering and filling of fluids of all types. LiquoFill ishandy especially in small series, as the purchase of astationary filling station designed in large series is oftennot profitable.The metering and filling devices are used in productionsites and laboratories for cosmetic, pharmaceuticaland chemical products, paints as well as in thefood and beverage industry.LiquoFill is ready to operate, simple to handle andeasy to clean. The fillers can be mounted on the tableusing a fastener or screwed directly on to the table;they are portable and therefore usable at differentplaces.The fill quantity can be calibrated precisely and continuouslyusing an adjusting nut, without any toolsand can be read at a display.The adaptable hand lever facilitates use by bothright- and left-handed individuals.Parts in contact with the medium are made of stainlesssteel V4A (1.4404/1.4571), springs V2A (1.4310),PTFE and FCR (Fluorocarbon rubber). Housing madeof aluminum, protection hoods made of stainlesssteel.When ordering, pleasestate the material tobe filled. We will testthe chemical resistance.Please always indicatethe desired sizewhen ordering fillingtubes.Different filling nozzles (Ø4/3 mm - Ø16/14 mm, with/without sieve) facilitate individual filling of diversecontainers such as bottles, tubes, nozzles, crucibles orglasses.51