Catalogue 2013 - Bürkle GmbH

Filling Machines | Sampling | Plastic Labwarefor Laboratory, Industry, Science2013

Contents002 PumpsContainer pumps, Barrel pumps, Barrel connectors, Thread adapters,Electric pumps, Stopcocks, Spigots, Ball valves, Dosage pumps062 Samplers & sample dividerSample divider, Samplers for bulk goods, Samplers for viscous substances, Samplers for liquids,Samplers for pharmaceutical products, Disposable & sterile samplers, Ice and meat sampling, Soil sampling146 ContainersBottles, Spray Bottles, Wash bottles and dropping bottles, Boxes, Canisters, Wide-mouth containers,Storage containers, Stacking containers, Tubs, Big containers, Safety containers, Packaging containers186 Laboratory & industrial equipmentTrays, Bowls, Buckets, Draining racks, Burettes, Dispensers, Funnels, Graduated beakers, Pipettes, Pipette controllers,Tubings, Flow indicators, Hose connectors, Hose clamps, Valves, Rapid couplings, Threaded fi ttings,Protective equipment, Accessories for laboratory equipment

Table of contents Pumps10 – 16 Container pumps17 – 30 Barrel pumps17 – 19 Barrel pumps for acids and alkalis20 – 23 Barrel pumps for flammable liquids24 – 27 Accessories for pumps25 – 27 Barrel connectors, Thread adapters31 – 37 Electric pumps38 – 39 Double-diaphragm pumps, Magnetic centrifugal pumps39 – 40 Airjet compressor, Siphon42 – 49 Stopcocks, Spigots, Ball valves, IBC discharge valves50 – 54 Dosage pumps55 – 61 Accessories for pumpswww.buerkle.de | info@buerkle.de | Hotline +49 (0) 76 35 8 27 95-0

PumpsPumps, stop cocks, dosing machines

Fill off liquids – but do it safelySafety is the top priorityDangerous liquids must never be filled off by directly pouring themout. Even the use of a funnel does not provide the required degreeof safety when bottling dangerous liquids.Increased accident risk by slipping on dirty floors.Skin diseases or poisoning by spilt chemicals.Health hazard from harmful vapours.Safety during bottling must be the number one priority – for yourown personal protection!This means that purchasing a suitable pump for filling off hazardousliquids is an investment in the safety and health of your employeeswhich pays for itself in a very short time.Choosing the right pumpApart from the size and type of the container, the required pump capacityand the suitability of the pump for the particular medium areimportant considerations for choosing the right pump. The pumpdoes not only have to be resistant to the medium to be bottled, butspecific occupational safety and environmental protection regulationsmust also be considered.Pump capacityElectric pumps are the first choice for filling off large quantities at afixed location. Their higher pumping capacity saves times and requiresless manual effort. However, the purchase of an expensiveelectric barrel pump does not always pay for itself; there is often noon-site mains supply, e.g. in the open air, during assembly or in theequipment storage facility. Manual pumps are an interesting alternativeto electric pumps for filling off small quantities due to theirindependence from a power supply and because they mean valuefor money. Bürkle offers a wide range of pumping devices for manuallyremoving liquids from containers, canisters, drums and tanks.Container size and container typePumps that work according to the excess pressure principle are suitablefor filling off the required quantities from canisters and smalldrums up to a capacity of approx. 60 litres. Air is pumped into thecontainer using a pumping ball or pumping piston. This creates excesspressure in the container and the liquid is transported out viathe immersion tube.Barrel pumps are suitable for larger barrels and open containers.They draw in the liquid and then eject it. This family of pumps ischaracterised by their robust construction with a good pumping capacityand simple handling. Different immersion tube lengths mean4www.buerkle.de | info@buerkle.de | Hotline +49 (0) 76 35 8 27 95-0

ination with an adapter. On the other hand, universal solutionssuch as conical drum stoppers can be used.MaterialsThe most suitable pumps are robust industrial pumps made fromtop-quality materials such as polypropylene (PP) for acids and alkalis,or stainless steel V2A (1.4301) for flammable liquids. We alwaysrecommend the use of PTFE seals. Always check that the material isresistant to the medium to be pumped.In many cases, a check against the chemical resistance list will help.Caution with filling aidsPlastic siphons are a cost-effective alternative to mechanical pumps.Siphons are easy-to-use devices for safely filling off liquids from ahigher container into a lower one. However, using them for aggressiveor flammable liquids cannot be recommended. The pump bellowscould be affected by acids and become brittle.that the pumps fit all the usual commercially available containers.Low-mounted suction valves ensure that almost all the residual liquidis removed.Container connectionsIn contrast to metal drums, which usually have an R2“ fine thread,there are no standard connection threads for plastic drums. Thereare basically two different ways of attaching the pump to the drumor container. On the one hand, the pump can be screwed onto theexisting container thread using a barrel screw joint, possibly in com-5

Gas-tight bottlingWith volatile media, such as acetone or ammonia, hazardous vapoursare formed in the container. Their evaporation into the workingenvironment and the risk to the user can be reduced by using agas-tight barrel connector. With particularly toxic, noxious and readilyvolatile media, a closed filling system with a gas-shuttle pipe isessential. In this method, the gases displaced from the container arereturned directly into the original container. The harmful gases remainin the system; the greatest possible degree of safety duringfilling off is guaranteed.FoodstuffsIf foodstuffs are to be filled off, then it must be ensured that thematerials used are physiologically harmless. Materials such as stainlesssteel, polypropylene or PTFE, which also have a neutral tasteand odour, can be recommended. Furthermore, the pump must beeasy to clean.Acids and alkalisAcids, alkalis and detergents can be safely handled by plastic pumpsmade of PP or PVDF. Bürkle offers many plastic pumps with bothrigid discharge pipes and also with discharge tubing and shut-offvalve for filling containers which are further away or higher up.When handling corrosive or aggressive liquids, the user must takeappropriate precautions. Protective clothing such as gloves, goggles,aprons and face masks is essential.Any questions?We will be happy to advise you. Talk to us - telephone +49 763582795-0. Or send an email to info@buerkle.de.Flammable liquidsFilling off flammable liquids requires special precautionary measures.It is essential that filling devices for flammable liquids aremade of conductive materials. It is essential that any electrostaticcharges formed are eliminated completely and without formingsparks. Stainless steel barrel pumps meet these requirements whenthe electrostatic charges are eliminated by using the Antistatic Set.6www.buerkle.de | info@buerkle.de | Hotline +49 (0) 76 35 8 27 95-0

Overview of pumpsPageLiquidsPastesGasesAcids and caustic solutionsAcids and caustic solutions, weakMineral oils, Diesel etc.PetrochemicalsOTAL liquid transfer pumps 8 x x x x x x x x x x x x 4OTAL mini pump 11 x x x x x x x x x x 4OTAL battery pump 11,13 x x x x x 5Pump-it ® container pump 14 x x x x x x x 12-26PumpMaster for chemical liquids 15 x x x x x x x x 8PumpMaster for petrochemical liquids 15 x x x x x x x x 8PumpMaster container and barrel pump 15 x x x x x x 8Dosi-Pump 16 x x x x x x x x x 4-250Barrel pump Ultrapure in PTFE 17 x x x x x x x x x x x 300-400Barrel pump in PP 18 x x x x x x x x x x x 12 200-300Stainless steel barrel pump 20 x x x x x x x x x x x x x 9-22 220-560Solvent pump foot operated 22 x x x x x x x x x x x x 30Solvent pump hand operated 23 x x x x x x x x x x x x 10Anti-statics set 24 x xGas-tight barrel pump in stainless steel 28 x x x x x x x x x x x 350-560Gas-tight barrel pump in PP 28 x x x x x x x x 200Rotary piston pump 29 x x x x x x x x 30-40Hand operated lever pump 29 x x x x x 25Lever pump 30 x x x x x x x 15 350Compact lever pump 30 x x x x x 300Piston pump 30 x x x x x x x 450Barrel pumps AccuOne and EnergyOne 31 x x x x x x x x x x 0,4-12Laboratory pump mains operated 34 x x x x x x x x 40-65Electric barrel pump petro 35 x x x x x x 40Drum pump for concentrated acids and alkalis 36 x x x x x x x 80Drum pump for slight acids and alkalis 36 x x x x x x 85Drum pump for mineral oils 37 x x x x x x x 85Double-diaphragm pump 38 x x x x x 16Magnetic centrifugal pump 39 x x x x 12-24Membrane vacuum pump 39 x x 16Siphon 40 x x x x x x x x x x 9Stop-cocks and ball valves 42 x x x x x x x x x x x x x x x x xBarrel valve 48 x xLiquoFill 50 x x x x x x x x x x x 8-500PastoFill 53 x x x x 10-260Wall mounted dosing machine 54 x x x x x x x x x x x x 100-500Pharmaceuticals/cosmeticsSolvents, not flammableSolvents, flammableFlammable liquidsFoodstuffsWaterDosing pumpsGastight decantingBottles up to 2 litersCanisters up to 20 litersLaboratory barrels 10/25 litersContainers up to 60 litersBarrels up to 220 litersOpen containers/tanksConveying capacity l/minConveying capacity l/strokeAttention! Make sure to pay attention to the “List of Chemical Resistance”! Errors and omissions excepted.7

8 www.buerkle.de | info@buerkle.de | Hotline +49 (0) 76 35 8 27 95-0

OTAL liquid transfer pumps | Filling off liquids quickly, safely and cleanlyThe OTAL pump program has been on the market for60 years. The pumps are popular and appreciatedthanks to their easy handling in daily use.Thanks to the simple stopper system, OTAL pumps canbe used for all common containers. The OTAL Mini allowseven very small containers to be filled.Only the tube comes into contact with the liquidwhen OTAL pumps are used, so that a great deal ofliquid can be filled off using the tube materials PP,PVDF and stainless steel V2A. The different tube diametersmake individual adjustments to requiredtransfer volumes possible.The bung has to fit!Filling with the proven OTAL pumps is particularly easy asthe liquid is forced out of the container by the excess airpressure. The liquid flow is steady, without pulsating.However, it is important that the connection between thepump and the container is airtight. This is ensured by theuniversal bung made of soft PVC.The universal bung consists of 3 parts, a conical centre (1)and 2 conical sleeves (2 and 3) which can be moved upand down the conical centre. This means that it is possibleto obtain an airtight seal between OTAL pumps and containeropenings with a diameter of 30 to 70 mm.The OTAL foot pump has another great advantage,particularly when filling aggressive media. It is designedso that both hands are free during the pumpingprocess.Optionally available as a foot or hand pumpUniversal bungs for container openings of 30 – 70mm diameterTubes made of PP, PVDF or stainless steel V2A fordifferent liquidsInstructions for useand safety informationmust becomplied with.Protective clothingmust be worn.See pages 56 – 59.9

OTAL hand pumps | to fit most commercial storage drumsThe telescopic immersion tube adapts itself to thecontainer height on insertion. This ensures good removalof residual liquid and means that the pump canbe used with different containers.Particularly compact, space-saving pumpGood pump capacityWith universal bungs made of soft PVC, for containeropenings of 30 - 70 mm ØAttention! Make sure to pay attention to the“List of Chemical Resistance“!10www.buerkle.de | info@buerkle.de | Hotline +49 (0) 76 35 8 27 95-0

OTAL hand pumps | to fit most commercial storage drums1 234 OTAL hand pump with hose and stopcockOTAL hand pump with hose and tap with dischargehose with a length of 1.5 m made of PVC and PP/PEstopcock, delivery tube made of PP. The dischargehose is particularly suited to fill distant containers.5 OTAL mini pump made of PPOTAL PP mini pump with delivery tubes made of PPand universal bungs made of soft PVC.456For small containers, ideal for containers up to 10litresWith universal bungs for container openings of20 - 36 mm Ø1 OTAL hand pump made of PPOTAL hand pumps with PP delivery tubes, resistant to weak acids, alkalis anddetergents.2 OTAL hand pump made of PVDFOTAL hand pump with PVDF delivery tubes, particularly suitable for acids and alkalis,not for heavily oxidising acids and alkalis. With its special material properties,PVDF has an even better chemical resistance than PP. Resistant to chlorine bleach.6 OTAL battery-pumpOTAL pump for safe filling of car batteries with acidor distilled water.With hose shutoff valveWith dosing tip for precise filling3 OTAL hand pump made of stainless steelOTAL hand pump with delivery tubes made of stainless steel (1.4301) for liquidsthat are not easily combustible in Hazard Category AIII (VbF). With universalbungs made of soft PVC and three bungs made of LDPE (48 – 56 mm Ø, 54 – 62mm Ø and 60 – 68 mm Ø). The OTAL PP or PVDF hand pump should be used forcaustic media.1112OTAL hand pumpsPumpcapacity approx.l/minTubeØ mmDeliverytubematerialImmersiondepth cmPrice €QuantityscalefromScaleprice €Item no.14 12 PP 70 67.50 10 59.70 5005-1200 N420 15 PP 70 70.80 10 65.30 5005-1500 N426 18 PP 70 72.00 10 64.80 5005-1800 N420 16 PVDF 70 121.50 10 111.30 5005-3000 N43456OTAL hand pumpsPump capacityapprox.l/minTube DeliveryØ mm tubematerialPrice €Immersiondepth cmQuantityscalefromScaleprice €Item no.26 18 V2A 90 121.50 10 111.30 5005-4000 N412 12 PP/PVC 70 70.80 10 63.00 5005-6000 N44 10 PP 45 48.20 10 43.50 5005-1000 N45 12 PP/PVC 70 77.60 10 69.80 5005-7000 N411

OTAL foot pumps | high performance, sturdy, for industrial useThe telescopic immersion tube adapts itself to thecontainer height on insertion. This ensures good removalof residual liquid and means that the pump canbe used with different containers.Simple handling: Both hands remain free for fillingVery good pump capacity due to large volumefoot bellowsWith universal bungs made of soft PVC, for containeropenings of 30 - 70 mm ØAttention! Make sure to pay attention to the“List of Chemical Resistance“!12www.buerkle.de | info@buerkle.de | Hotline +49 (0) 76 35 8 27 95-0

OTAL foot pumps | high performance, sturdy, for industrial use231 451 OTAL foot pump made of PPOTAL foot pumps with delivery tubes made of PP, resistant to weakacids, alkalis and detergents.2 OTAL foot pump made of PVDFOTAL foot pump with delivery tubes made of PVDF, particularly foracids and alkalis, not for heavily oxidising acids and alkalis. Resistantto chlorine bleach. With its special material properties, PVDFhas an even better chemical resistance than PP.3 OTAL foot pump made of stainless steelOTAL foot pump made of stainless steel (1.4301), with deliverytubes made of stainless steel for liquids that are not easily combustiblein Hazard Category AIII (VbF). With universal bungs made ofsoft PVC and three bungs made of LDPE (48 – 56 mm Ø, 54 – 62mm Ø and 60 – 68 mm Ø).4 OTAL foot pump with hose and stopcockOTAL foot pump with hose and tap with delivery tubes made of PP and a1.5 m discharge hose made of PVC with stopcock made of PP/PE Ø 10 mm.5 OTAL battery-pumpOTAL pump for safe filling of car batteries with acid or distilled water.1OTAL foot pump made of PPPump Tube Øcapacity approx.mml/minDeliverytubematerialImmersiondepth cmPrice €Quantityscale price €ScalefromItem no.20 15 PP 70 83.30 10 78.80 5000-1500 N426 18 PP 70 85.60 10 77.60 5000-1800 N430 22 PP 90 94.50 10 83.30 5000-2200 N42345Pump Tube Øcapacity approx.mml/minDeliverytubematerialPrice €Immersiondepth cmQuantityscale price €ScalefromItem no.20 16 PVDF 70 128.10 10 118.10 5000-4016 N426 18 V2A 90 128.10 10 118.10 5000-5018 N412 12 PP/PVC 70 85.60 10 77.60 5000-3012 N45 12 PP/PVC 70 94.50 10 83.30 5000-6000 N413

Pump-it ® container pumpAdapter set Pump-it ®Screw Pump-it ®onto containerPump air intocontainerDraw off liquidwith Pump-it ®Pump-it ® canister pumps are designed for quickly and cleanly emptying canisters and smallbarrels up to 60 l. The hand pump is used to create excess pressure that forces the liquidout of the canister. Pump-it ® is suitable for weak acids, alkalis and petrochemicals. Medium-contacting parts made of PP, PE and FKM Pump threads suitable for container threads 64 mm Ø (BSI) Exact dosing, no drips Container completely emptied, thanks to stepless length adjustment of immersion tubeNot suitable for hydrochlorc acid! Make sure to pay attention to the “List of ChemicalResistance“!Pump-it ® container pumpMaterial Immersion depth Pump capacity Price € Quantity scale Scale price € Item no.cmapprox. l/minfromPP/FKM 100 8 110.90 10 99.85 5201-1000 N4AccessoriesDescription Price € Item no.Adapter set Pump-it ® consisting of: 0600-3002, -3003, -3004, -1014, -1016 47.70 5201-0030 N4Thread adapters PP outer/outer 2” coarse thread Mauser - 64 mm (BSI) 10.85 0600-3004 N4Thread adapters PP outer/outer 2” coarse thread TriSure - 64 mm (BSI) 10.85 0600-3002 N4Thread adapters PP outer/outer 2” BSP - 64 mm (BSI) 10.85 0600-3003 N4Thread adapters PP outer/inner 64 mm (BSI) - DIN 60 15.75 0600-1014 N4Thread adapters PP outer/inner 64 mm (BSI) - DIN 51 18.05 0600-1016 N4Thread adapters PP outer/inner 64 mm (BSI) - DIN 61 18.05 0600-1013 N4Thread adapters PP outer/inner 64 mm (BSI) - DIN 71 18.05 0600-1001 N4Adapters see p. 26Thread adapter set for Pump-it ® canisterpump consisting of: Adapter outer/outer, 2” coarse Mauser -64 mm (BSI), green Adapter outer/outer, 2” coarse TriSure -64 mm (BSI), brown Adapter outer/outer, 2” BSP - 64 mm(BSI), blue Adapter outer/inner, 64 mm (BSI) - DIN60, black Adapter outer/inner, 64 mm (BSI) - DIN51, blackAdapter set Pump-it ®Price € Quantity Scale price € Item no.scale from47.70 10 43.00 5201-0030 N4More adapters on p. 2614www.buerkle.de | info@buerkle.de | Hotline +49 (0) 76 35 8 27 95-0

PumpMaster container pumps | flexible, for universal useThe manual pressure pump is ideally suited for drawingoff, decanting and emptying canisters and barrels.The hand pump is used to create excess pressure thatforces the liquid out of the container. The stopcockalso allows extraction of small quantities of liquid.The PumpMaster container pump is mounted on thecontainer using a flexible stopper with a variable andadjustable diameter. No special thread adapters arerequired. PumpMaster fits all commercial containeropenings with a diameter from 49.5 mm to 60 mm.The immersion tube has a length of 95 cm and it canbe shortened depending on the size of the container.Complete with three bungs in different sizesAttention! Make sure to pay attention to the“List of Chemical Resistance“!PumpMaster container pump for petrochemical liquidsGaskets Colour Pump capacity Immersion Price € Quantity Scale price € Item no.approx. l/min depth cmscale fromPP/Nitrile blue grey 8 95 117.55 10 104.85 5202-3000 N4rubberAccessoriesDescription Price € Item no.Discharge hose with shut-off valve for PumpMaster for petrochemical liquids 53.30 5202-3001 N4PumpMaster container pump for non-aggressive liquidsGaskets Colour Pump capacity Immersion Price € Quantity Scale price € Item no.approx. l/min depth cmscale fromPP/EPDM red 8 95 117.55 10 104.85 5202-2000 N4AccessoriesDescription Price € Item no.Discharge hose with shut-off valve for PumpMaster for aqueous liquids 53.30 5202-2001 N4PumpMaster canister barrel pumpstopper releasedVarious stoppers for PumpMasterPumpMaster canister barrel pumpstopper expandedPumpMaster for acids and chemical liquidsGaskets Colour Pump capacity Immersion Price € Quantity Scale price € Item no.approx. l/min depth cmscale fromFKM green 8 95 173.00 10 164.35 5202-1000 N4AccessoriesDescription Price € Item no.Discharge hose with shut-off valve for PumpMaster for acids and chemical liquids 73.40 5202-1001 N415

Dosing pumps Dosi-Pump21 mm 28,5 mm 22,5 mm 28,5 mm 28,5 mm12 3 4 5Dosi-Pump 4 mlStandard dosage approx.4 ml per stroke.Dosi-Pump 30 mlStandard dosage approx.30 ml per stroke.Dosing pumps suitable for barrels, canisters, carboysor bottles, for dosing liquids of different viscosities.Dosing pumps are mounted by you in your existingcontainer closure (see the locating bore table). To dothis, a suitable hole is drilled in the cap. Then thepump is inserted through the hole and screwed inplace from below.A matching container connection is not included inthe scope of delivery.Dosi-Pump 30 ml,fixed feeding tubeStandard dosage approx.30 ml per stroke, thepump has a fixed feedingtube.Dosi-Pump 100 ml,fixed feeding tubeStandard dosage approx.100 ml per stroke, thepump has a fixed feedingtube.Dosi-Pump 250 ml,fixed feeding tubeStandard dosage approx.250 ml per stroke, thepump has a fixed feedingtube.Medium-contacting parts made of PP, PE andstainless steelDosing pumps Dosi-PumpStroke Drillhole ImmersionPrice €approx.mldia.mm depthcm12345QuantityscalefromScaleprice €Item no.4 21 20 7.10 100 5.68 5607-1004 N330 28,5 28 11.35 100 9.08 5607-2030 N330 22,5 35,5 19.45 100 15.55 5607-3030 N3100 28,5 28 61.45 100 49.15 5607-4100 N3250 28,5 28 76.50 100 61.20 5607-5250 N316www.buerkle.de | info@buerkle.de | Hotline +49 (0) 76 35 8 27 95-0

PTFE barrel pumps UltrapureDue to the high chemical resistance of the medium-contacting partsmade of PTFE and FEP, even liquids which attack conventional materialssuch as PP or PVC can now be safely transferred (except forelemental fluorine) with this barrel pump.The barrel pump is also suitable for transferring ultra-pure liquids.The stopcock prevents hazardous vapours from escaping, and stopsdripping after transfer.Barrel pump with rigid discharge tube with stopcock made of PTFE.Barrel pump with flexible discharge hose made of PTFE, length of1.2 m and stopcock made of PVDF.Immersion tube Ø 32 mmAll valves are made of solid PTFE/PVDFTop quality - 2 years’ warrantyBarrel screw joints for commercially available containers availableas accessoriesPTFE barrel pump Ultrapure - discharge tubeImmersion Pump capacityPrice € Quantity scale Scale price € Item no.depth cmml/strokefrom60 270 294.50 10 275.75 5606-0600 N495 400 319.30 10 307.00 5606-1000 N4PTFE barrel pump Ultrapure - discharge hoseImmersion Pump capacityPrice € Quantity scale Scale price € Item no.depth cmml perstrokefrom60 270 294.50 10 275.75 5606-0601 N495 400 319.30 10 307.00 5606-1001 N4AccessoriesDescription Price € Item no.PP barrel screw joint, R 2”, internal steel barrel thread 23.80 5600-3130 N4PP barrel screw joint, Mauser 2”, internal coarse thread 29.65 5600-3170 N4PP barrel screw joint, Tri-Sure ® , internal coarse thread 34.20 5600-3180 N4SafetyBox incl. safety goggles and protective gloves 35.45 2507-9000 N317

PP barrel pumps | robust industrial quality5 6 7Barrel pumps made of polypropylene allow a fasttransfer of liquids from barrels, canisters and tanks.The good chemical resistance of PP allows acids, alkalisand aggressive detergents to be transferred.The low-mounted non-return valve of the barrel pumpand the immersion depth that can be steplessly adjustedusing the barrel screw joints ensure good removalof residual liquid. The barrel screw joint fastensthe barrel’s pump securely to the barrel. Barrel screwjoints and thread adapters for commercially availablecontainers are available as optional accessories.Attention! Make sure to pay attention to the“List of Chemical Resistance“!18www.buerkle.de | info@buerkle.de | Hotline +49 (0) 76 35 8 27 95-0

PP barrel pumps | robust industrial quality213 41 PP barrel pump - discharge tubeImmersion Pump Total Price €depth cm capacity ml length cmper strokeQuantityscale fromScaleprice €Item no.50 200 60 129.00 5 118.60 5600-0501 N465 230 74 129.00 5 118.60 5600-0651 N480 260 90 133.55 5 122.15 5600-0801 N4100 300 109 140.50 5 125.55 5600-1001 N4125 300 134 160.05 5 149.70 5600-1251 N4150 300 159 168.15 5 162.30 5600-1501 N4PP barrel pump - discharge tubePP barrel pump with rigid discharge tube.PP barrel pump - discharge hose/stopcockPP barrel pump with flexible discharge hose made of PVC, length of1.2 m and stopcock.Seals made of PTFEImmersion tube Ø 32 mmCapacity up to approx. 12l/minFor barrels and tanks of 60 - 1000 litres2PP barrel pump - discharge hose/stopcockPump Total Price €capacity ml length cmper strokeImmersiondepth cmQuantityscale fromScaleprice €Item no.50 200 60 129.00 5 118.60 5600-0502 N465 230 74 129.00 5 118.60 5600-0652 N480 260 90 133.55 5 122.15 5600-0802 N4100 300 109 140.50 5 125.55 5600-1002 N4125 300 134 160.05 5 149.70 5600-1252 N4150 300 159 168.15 5 162.30 5600-1502 N4AccessoriesDescription Price € Item no.3 PP barrel screw joint, R 2”, internal steel barrel thread 23.80 5600-3130 N44 PP barrel screw joint, Mauser 2”, internal coarse thread 29.65 5600-3170 N45 PP barrel screw joint, Tri-Sure ® , internal coarse thread 34.20 5600-3180 N4AccessoriesDescription Price € Item no.6 Container screw joint 29.35 5600-3140 N47 PVC barrel plug, dia. 40-70 mm 19.55 5600-3150 N4Discharge hose 1.2 m PVC with stopcock for PP barrel pump 11.85 5600-0100 N4Drain safety stand (see page 55) 42.25 5618-1000 N419

Stainless Steel Barrel Pump | for flammable liquidsThe Bürkle barrel pump made of stainless steel(1.4301) is suitable for filling combustible and easilyflammable liquids. The barrel pump can conduct electricityand therefore fulfills the requirements for handlingflammable liquids in combination with the accessoryantistatic set.The PTFE gaskets ensure long-term and maintenancefreeuse. Pumping capacity approx. 9 – 22 l/min, dependenton pump length.The wide range of accessories makes it possible toadapt the pump to very different requirements.Not suitable for acetone!When withdrawing flammable liquids, the barreland pump has to be grounded!Use Anti-static set!4 56 320www.buerkle.de | info@buerkle.de | Hotline +49 (0) 76 35 8 27 95-0

Stainless Steel Barrel Pump | for flammable liquids211 Stainless steel barrel pump - discharge tubeImmersiondepth cmTotallength cmPumpcapacity mlper strokePrice € Quantityscale fromScaleprice €Item no.36 48 220 180.85 5 162.30 5601-0400 N457 69 350 180.85 5 162.30 5601-0500 N491 103 560 188.85 5 171.50 5601-0800 N42Stainless steel barrel pump - discharge hose/stopcockImmersiondepth cmTotallength cmPumpcapacity mlper strokePrice €Quantityscale fromScaleprice €Item no.36 48 220 300.45 5 287.75 5601-0401 N457 69 350 300.45 5 287.75 5601-0501 N491 103 560 309.65 5 294.70 5601-0801 N4Assessment of IgnitionRisks, usable in:Zones 0 and 1Explosion group II AAccessoriesDescription Price € Item no.3 Anti-static set 43.25 5602-1000 N44 Brass barrel screw joint R2” steel fi ne thread inside 35.35 5601-0100 N4DEKRA EXAM GmbHStainless steel barrel pump - discharge tubeBarrel pump made of stainless steel withdischarge tubeRemovable discharge tubeImmersion tube Ø 32 mmIdentification N o. 0158testedStainless steel barrel pump - discharge hose/stopcockBarrel pump stainless steel with discharge hose and stopcock madeof stainless steel and PTFE, can conduct electricity.Immersion tube Ø 32 mmRemovable hose, 1.2 m in lengthBall valve made of stainless steel NW 8 mmDischarge nozzle Ø 12.8 mmAccessoriesDescription Price € Item no.5 Gastight barrel connector R2” steel fi ne thread inside 107.10 5601-0130 N4Discharge hose 1.2 m with stainless steel/PTFE stopcock for stainless 161.20 5601-0090 N4steel barrel pumpDischarge tube for stainless steel barrel pump 57.65 5601-0080 N46 PVC barrel plug, dia. 40-70 mm (not for EX zone) 19.55 5600-3150 N4Drain safety stand (see page 55) 42.25 5618-1000 N4PP barrel screw joint, R 2”, internal steel barrel thread 23.80 5600-3130 N4PP barrel screw joint, Mauser 2”, internal coarse thread 29.65 5600-3170 N4PP barrel screw joint, Tri-Sure ® , internal coarse thread 34.20 5600-3180 N4Universal barrel spanner 24.15 5690-0090 N4Casual style safety goggles 23.45 2502-2010 N321

Solvent pump foot operatedSolvent pump foot operated for filling of high purity liquids such as solvents.All medium-contacting parts are made of stainless steel (1.4301) and PTFE. Due tothe barrel screw joint and the stopcock, the container and the pump can be hermeticallysealed. Unwanted vapours can therefore not escape during the fillingprocess.Massive, long-life industrial version. Clip connection for fast connection and disconnectionof the air hose.Immersion tube can be steplessly adjusted to the barrel depthFor barrels up to 220 litresSuitable for steel barrels with R 2” threadThread adapter for commercially available containers and air filters for ultrapuredrawing-off available as accessory (page 26)When withdrawing flammable liquids, the barrel and pump has to begrounded! Use Anti-static set!Assessment of IgnitionRisks, usable in:Zones 0 and 1Explosion groupsII A, II BDEKRA EXAM GmbHIdentification N o. 0158testedSolvent pump foot operated - discharge hose/stopcockImmersion depth cm Connector thread Pump capacity approx. Price €Item no.l/min95 2’’ 30 516.70 5603-3000 N4Solvent pump foot operated - discharge tubeImmersion depth cm Connector thread Pump capacity approx. Price €Item no.l/min95 2’’ 30 385.55 5603-1100 N4AccessoriesDescription Price € Item no.Anti-static set 43.25 5602-1000 N4AccessoriesDescription Price € Item no.Air fi lters for solvent pump, 10 pieces 24.70 0006-6009 N422www.buerkle.de | info@buerkle.de | Hotline +49 (0) 76 35 8 27 95-0

Solvent pump hand operatedAssessment of IgnitionRisks, usable in:Zones 0 and 1Explosion groupsII A, II BHand-operated solvent pump for contamination-free removal of organic solventsand flavouring agents. For containers up to 60 l.The pump is gas-tight and completely sealable with two ball valves.DEKRA EXAM GmbHIdentification N o. 0158testedMedium-contacting parts made of stainless steel (1.4301) and PTFERigid discharge tube with stopcock made of stainless steel/PTFESuitable for containers with R 2” threadThread adapter for commercially available containers available as accessory(page 26)When withdrawing flammable liquids, the barrel and pump has to begrounded! Use Anti-static set!Anti-static setSolvent pump for tin-foil canistersfits on pull-out spoutsSolvent pump hand operatedImmersion depth cm Connector thread Pump capacity approx. Price €Item no.l/min60 2’’ 10 352.15 5603-1000 N4Solvent pump hand operated, for tin-foil canistersImmersion depth cm Connector thread Pump capacity approx. Price €Item no.l/min60 For pull-out spout 10 370.70 5603-2000 N4AccessoriesDescription Price € Item no.Anti-static set 43.25 5602-1000 N423

Anti-static set | prevents electrostatic build-upConductive containers are connectedwith the red cable, theblack cable makes the earth connection(water pipe, etc.)Safety Plus: The bare copper wireensures earthing when pouringinto non-conductive containersWhen decanting flammable liquids without the machines and containers involvedin the process being sufficiently earthed, electrostatic build-up can occur, whichfor many substances can result in fire or an explosion.Bürkle’s anti-static set ensures easy and reliable earthing.The anti-static set consists of three colour-coded connecting copper cables withclamps in a handy plastic case.© Paul-Georg Meister/PIXELIO24Anti-static setPrice € Quantity scale from Scale price € Item no.43.25 5 39.00 5602-1000 N4www.buerkle.de | info@buerkle.de | Hotline +49 (0) 76 35 8 27 95-0

Barrel screw jointsBarrel screw joint made of nickel-plated brass for barrelpump stainless steel. Prevents electro-static charge incombination with the anti-static set. For the safe transferof flammable and easily flammable liquids. For containerswith R2“ steel fine thread inside.Brass barrel screw jointThread Price € Quantity Scale price € Item no.scale fromR2” steelfi ne threadinside35.35 5 31.35 5601-0100 N4The gas tight barrel screw joint prevents hazardous gasesfrom escaping from the barrel. R2” steel barrel thread,non-return valve with connection 1/8”. Nickel-platedbrass, seals made of FKM.Gastight barrel connectorThread Price € Quantity Scale price € Item no.scale fromR2” steelfi ne threadinside107.10 5 94.20 5601-0130 N4Barrel screw joint made of PP for secure connection inthe barrel in three different thread models. For drawingoff liquids that are not flammable.Container screw joint to fasten the barrel pump in anylocation on the side of the container. Also for wideneckedscrew caps. The screw joint 2” is screwed onfrom the inside using lock nut 2”. (Mounting holes in thecontainer 60 mm).PP barrel screw jointThreadPrice€QuantityscalefromScaleprice €Item no.R 2”, internal steel barrel thread 23.80 5 21.45 5600-3130 N4Mauser 2”, internal coarse 29.65 5 26.70 5600-3170 N4threadTri-Sure ® , internal coarse thread 34.20 5 30.75 5600-3180 N4Container screw jointOpening dia. Price € Quantity Scale price € Item no.mmscale from60 29.35 5 28.20 5600-3140 N4Barrel bungs made of PVC, consisting of two parts,therefore can be used for various openings with a diameterfrom 40-70 mm.PVC barrel plugOpening dia. Price € Quantity Scale price € Item no.mmscale from40-70 19.55 5 17.35 5600-3150 N425

Thread adapters PP1 2 3 4 5678910111213141516171819202122We offer a broad range of threadadapters. This facilitates the secureconnection of many of our pumpsand discharge cocks to a variety ofcontainers.You will always find the correct connectionthanks to the combination ofdifferent adapters.Do you have any questions aboutchoosing the right thread adapter?Please call us. We are glad to offerassistance.Instructions for determining thethread can be found on page 252.12345678910111213141516171819202122External thread Internal thread Colour Price € Quantity scale from Scale price € Item no.Tri-Sure ® 2’’ BSP orange 14.20 10 12.65 0600-1006 N4Mauser 2’’ BSP blue 14.20 10 12.90 0600-1010 N4Tri-Sure ® Mauser red 14.20 10 12.65 0600-1011 N4Mauser Tri-Sure ® bordeaux 14.20 10 12.65 0600-1012 N4US-Fass 2’’ BSP silver 14.20 10 12.65 0600-1007 N461 mm 2’’ BSP gray 14.20 10 12.65 0600-1008 N461 mm 3’’ grob natural 20.40 10 18.90 0600-1009 N464 mm (BSI) DIN 60 black 15.75 10 14.40 0600-1014 N464 mm (BSI) DIN 51 black 18.05 10 16.20 0600-1016 N464 mm (BSI) DIN 61 yellow/blue 18.05 10 16.20 0600-1013 N464 mm (BSI) DIN 71 brown/blue 18.05 10 16.20 0600-1001 N4Internal thread Colour Price € Quantity scale from Scale price € Item no.35 mm - 2’’ BSP black 17.15 10 15.65 0600-2004 N451 mm - 2’’ BSP green 17.15 10 15.65 0600-2005 N4DIN 61 - 2’’ BSP yellow 14.20 10 12.65 0600-2001 N464 mm - 2’’ BSP white 17.15 10 15.65 0600-2006 N4DIN 71 - 2’’ BSP brown 14.50 10 12.65 0600-1003 N4External thread Colour Price € Quantity scale from Scale price € Item no.61 mm - Tri-Sure ® black 8.20 10 6.80 0600-3006 N461 mm - 2’’ BSP black 8.20 10 6.80 0600-3007 N42’’ grob M. - 64 mm (BSI) green 10.85 10 9.90 0600-3004 N42’’ grob Tri-Sure ® - 64 mm (BSI) brown 10.85 10 9.90 0600-3002 N42’’ BSP - 64 mm (BSI) blue 10.85 10 9.90 0600-3003 N4Adapter set, consisting of 1, 2, 14 and 16 46.55 5 43.00 0600-3010 N426www.buerkle.de | info@buerkle.de | Hotline +49 (0) 76 35 8 27 95-0

Thread adapter set LaboPlast ®Thread adapters LaboPlast 3/4”1 2 3 4Thread adapter 3/4” - HünersdorffThread adapter 3/4” - KautexThread adapter 3/4” - cylindricalR 3/4” barrel threadThread adapter 3/4” - conicalR 3/4” barrel threadAdapter set consisting of: Thread adapter 3/4” - Hünersdorff Thread adapter 3/4” - Kautex Thread adapter 3/4” - cylindrical R 3/4”barrel thread Thread adapter 3/4” - conical R 3/4”barrel thread Hexagonal key for thread adapter5 6 7 8Thread adapter 3/4” -coarse thread, TriSure ® 2”Thread adapter 3/4” - coarsethread, Mauser 2”Thread adapter 3/4” - finethread 2”Captive cap for 3/4”StopCock spigots, ball valves and other accessories can be connected to mostcommercially available containers, with the LaboPlast ® thread adapters.All adapters have a standard outer thread R 3/4”.9Hexagonal key for threadadapterThread adapter set LaboPlast ®Price € Quantity Scale price € Item no.scale from15.85 10 14.60 0600-0050 N4Thread, outflowing sideThread, inflowingColour Material Price € Quantity Scale Item no.sidescale from price €1 Hünersdorff 3/4” red PP 4.62 10 4.14 0600-0010 N42 Kautex 3/4” blue PP 4.62 10 4.14 0600-0020 N43 cylindrical R 3/4” thread connection 3/4” black PP 4.62 10 4.14 0600-0150 N44 conical R 3/4” thread connection 3/4” green PP 4.62 10 4.14 0600-0030 N45 coarse thread, Tri-Sure ® 2” 3/4” green/white PP/PE 10.95 10 10.10 0600-0094 N46 coarse thread, Mauser 2” 3/4” green/white PP/PE 10.95 10 10.10 0600-0120 N47 fi ne thread 2” 3/4” green/white PP/PE 10.95 10 10.10 0600-0190 N48 Captive cap for 3/4” gray PVC 4.62 10 4.14 0600-0090 N49 Hexagonal key for thread adapter blue PP 2.22 10 2.00 0600-0001 N427

Gas-tight barrel pump PP | odor-free liquid transferGas-tight stainless steel pump12Liquid is pumped in the closed system(blue). Vapours are directed backthrough the gas displacement line(pink)281Medium-contacting partsPP and PVC soft (hose)Steplessly extendabletelescopic tubeFor barrel depths of 40- 67 cmTwo adapters for originalcontainersThe gas-tight barrel pump enables odour-free transfer.During transfer with normal pumps, it is impossible to prevent vapours escapinginto the atmosphere. The gas-shuttle method avoids this. Any vapours producedare returned from the container which is to be filled to the original container viathe gas-shuttle pipe. The gas pipe and the liquid pipe are additionally providedwith stopcocks. Gas-tight pumps are used for substances that have a strong smellsuch as ammonia.Gas-tight barrel pump PPModel Price € Quantity Scale Pump capacity Item no.scale from price € ml per stroke1 with universal adapter 30-70 mm Ø 163.55 5 149.70 200 5610-1030 N42 with 2 screw joint adapters 3/4” with lock nuts 163.55 5 149.70 200 5610-1040 N4Gas-tight barrel pump with flexible discharge hosefor filling off into large canisters and containers. Convenienttransfer because the canister can stay on thefloor. The connection cone is held onto the container. Parts in contact with media: Stainless steel(1.4301), PTFE, nickel-plated brass, PA that canconduct electricity Incl. gas-tight barrel screw joints with 2” finethread For bottle openings from 16 - 49 mm Immersion tube Ø 32 mm The pump can be hermetically sealed with twoball valvesPump has been developed in cooperation withLudwig-Maximilians University, Munich.Gas-tight stainless steel barrel pump - discharge hose/stopcockImmersiondepthcmTotallengthcmPumpcapacityml perstrokePrice €QuantityscalefromScaleprice €Item no.57 69 350 662.95 5 606.50 5611-1090 N491 103 560 684.75 5 627.30 5611-0090 N4www.buerkle.de | info@buerkle.de | Hotline +49 (0) 76 35 8 27 95-0

Lever pump aluminumRotary piston pumps3Barrel screw joint rotary1 piston pump24Rotary piston pump made of cast ironRotary piston pump made of V2AMany uses: Between hose connections, as a barrel pump with a rigid outlet elbowor a flexible discharge hose. It can pump in both directions by rotating backwardsand forwards.Lever pump for petrochemical substances made ofstable aluminium cast, valves and pistons are made ofplastic (PA). Suitable for barrel threads M 64 x 4 or R2” With closure device Immersion tube length 84 cm Supplied with hose kit, hose length 1.5 m, electricallyconductive, with outlet elbow and bendprotection springLever pump aluminumPump capacityapprox.l/minPumpingheight watercolumn mConnectorthreadPrice €Item no.25 1 M64x4, R2’’ 149.70 5627-1000 N2AccessoriesDescription Price € Item no.Anti-static set 43.25 5602-1000 N4 Viscosity up to max. 150 cst ISO/11.5° Engler/40 SAE at + 20°C Hose kit consisting of 1.5 m PVC hose, connection fittings and filler pipe availableas accessories With two-part immersion tube length 100 cmRotary piston pump cast ironPump capacity Connector thread Pumping height Material Price € Item no.approx. l/minwater column m1 30 3/4’’ 8 cast iron/bronze 172.75 5626-1030 N21 40 1’’ 7,5 cast iron/bronze 218.85 5626-1040 N2Rotary piston pump stainless steelPump capacity Connector thread Pumping height Material Price € Item no.approx. l/minwater column m2 40 1’’ 7 AISI 304/PTFE 1109.40 5626-2040 N2AccessoriesDescription Price € Item no.3 Thread connection for rotary piston pump 3/4”, 5626-1030 15.45 5626-0110 N24 Thread connection for rotary piston pump 1”, 5626-1040 / -2040 17.35 5626-0121 N2Angled thread connection for rotary piston pump 3/4”, 5626-1030 11.45 5626-0132 N2Angled thread connection for rotary piston pump 1”, 5626-1040 / -2040 14.10 5626-0133 N2Discharge hose for rotary piston pump 3/4”, 5626-1030 21.95 5626-0031 N2Discharge hose for rotary piston pump 1”, 5626-1040 / -2040 29.10 5626-0030 N2Discharge tube for rotary piston pump 3/4”, 5626-1030 12.95 5626-0012 N229

Compact lever pumpLever pumpPiston pump PPCompact, self-priming polyethylene leverpump, suitable for alkaline liquids and manyacids. The telescope suction tube for leverpump is steplessly extendable to 914 mm,which means it can be used for barrels from60 to 200 l.Pump capacity is about 300 ml perstrokeWith integrated barrel screw connectionfor 2" BSP threadAttention! Make sure to pay attentionto the “List of Chemical Resistance“!Compact lever pumpImmersion Price € Quantity Scale Item no.depth cmscale from price €91 94.25 10 89.50 5613-0020 N2With the lever pump, required quantities canbe taken from barrels without much effort.The pump is made of polypropylene. The dischargetube can be rotated around its ownaxis. This means that containers for fillingoff can also be placed on the barrel lid.Pump capacity 350 ml per strokeViscosity of the media up to 2200 mPas(not suitable for oil)Screw joint 2” for steel barrel innerthreadImmersion tube steplessly extendable upto 95 cmFitting thread adapter is available asaccessoryAttention! Make sure to pay attentionto the “List of Chemical Resistance“!Lever pumpPrice € Quantity Scale price € Item no.scale from48.40 10 43.50 5613-0010 N2The piston pump is made of polypropyleneand polyethylene, for watery and petrochemicalproducts. It represents value-formoney.The piston pump is attached to thecontainer which is to be filled using a 2“- or3/4“ barrel thread. After mounting, thepump can still be rotated around its axis sothat containers to be filled can be placed onthe barrel lid. Pump capacity 300 ml per stroke For containers with R2” and 3/4” innerthread Immersion tube length 84 cmAttention! Make sure to pay attentionto the “List of Chemical Resistance“!Piston pump PPPrice € Quantity Scale price € Item no.scale from43.35 10 39.00 5613-0030 N230www.buerkle.de | info@buerkle.de | Hotline +49 (0) 76 35 8 27 95-0

AccuOne / EnergyOne | Flexible – reliable – convenient – with the hybrid systemThe new approach to flexibility –One pump with maximum possibilities.Bürkle barrel pumps AccuOne and EnergyOne with the uniquehybrid system ensure fast, flexible and convenient filling wheneverand wherever you want. The pumps are equipped with two differentpower supply systems:AccuOne, driven by a high-performance rechargeable battery orEnergyOne, with a power cable for direct connection to theelectrical network.The innovative new feature: The power supply unitsare interchangeable!One drive for several pump stations31

AccuOne / EnergyOne | Flexible – reliable – convenient – with the hybrid systemThe rechargeable battery or the power supply unit are fitted with a clip lock andare removable. They can be exchanged quickly and easily. Thus AccuOne can alsobe operated with the power supply cable unit and EnergyOne can be operatedwith the rechargeable battery. With a replacement rechargeable battery as an accessory,you never have to wait for charging.The drive can also be disconnected quickly and easily from the pump station witha clip lock. This makes it possible to use one drive for filling at several stationarypump stations.AccuOne and EnergyOne are designed for applications in which even very smallamounts of liquid can be added to small containers with narrow openings.The TouchPanel features a foil keyboard sealed off against dust, dirt and water.The keyboard can be used to regulate the flow rate continuously and preciselyfrom 0.4 l/min to 12 l/min.In addition to the drainage elbow, a flexible drainage hose with nozzle is optionallyavailable.The light and powerful pumps are made of high-quality materials, PP, PVDF andHastelloy C, to ensure outstanding chemical resistance. This also makes them suitablefor dispensing acids and bases. Please make note of detailed information relatedto chemical resistance!Battery can be easily disconnectedPower supply can be easily disconnectedAttention! Make sure to pay attention to the “List of Chemical Resistance“!Do not use in EX area!Drive unit can be easily disconnectedTouchpanelUnique hybrid system – rechargeable battery and power supply unit are interchangeableDrive unit can be easily disconnectedTouchPanel for precise dosingExcellent residual draining and pumping capacityOne drive for several pump stationsOutstanding chemical resistancePower supply unit incl. connectorCharger for battery32www.buerkle.de | info@buerkle.de | Hotline +49 (0) 76 35 8 27 95-0

AccuOne barrel pumpEnergyOne barrel pumpMore accessories on page 34More accessories on page 34The barrel pump driven by rechargeable battery, AccuOne, features aunique new hybrid system with complete flexibility and independencefrom the electrical network. A powerful light rechargeable batterywith the latest next generation lithium-ion technology, withoutmemory effect, with auto-stop function before deep discharge.Lithium-ion rechargeable battery – latest generationUp to 600 litres of delivery volume per battery charge, replacementback-up battery availableOptionally available with rechargeable battery or power supplyunit (available as accessory)Consisting of pump station, drive, rechargeable battery, chargerand fixed discharge elbowAccuOne barrel pump driven by rechargeable batteryImmersion depth cm Price € Item no.50 373.15 5900-1050 N470 383.80 5900-1070 N4100 394.55 5900-1100 N4AccessoriesDescription Price € Item no.PP barrel screw joint, R 2”, internal steel barrel thread 23.80 5600-3130 N4PP barrel screw joint, Mauser 2”, internal coarse thread 29.65 5600-3170 N4PP barrel screw joint, Tri-Sure ® , internal coarse thread 34.20 5600-3180 N4The barrel pump driven by power supply unit, EnergyOne, features aunique new hybrid system with complete flexibility and independencefrom battery charging.Power supply via 230 V power supply unit, international plugadapter included with delivery.Unlimited filling durationOptionally available with power supply unit or rechargeablebattery (available as accessory)Consisting of pump station, drive, power supply unit incl. connectorand fixed discharge elbowEnergyOne barrel pump driven by power supply unitImmersion depth cm Price € Item no.50 315.40 5900-2050 N470 326.15 5900-2070 N4100 336.80 5900-2100 N4AccessoriesDescription Price € Item no.PP barrel screw joint, R 2”, internal steel barrel thread 23.80 5600-3130 N4PP barrel screw joint, Mauser 2”, internal coarse thread 29.65 5600-3170 N4PP barrel screw joint, Tri-Sure ® , internal coarse thread 34.20 5600-3180 N433

AccuOne/EnergyOne | accessoriesLaboratory pump mains operated4 65710118129334AccessoriesDescription Price € Item no.1 PP barrel screw joint, R 2”, internal steel barrel thread 23.80 5600-3130 N41 PP barrel screw joint, Mauser 2”, internal coarse thread 29.65 5600-3170 N41 PP barrel screw joint, Tri-Sure ® , internal coarse thread 34.20 5600-3180 N42 Container screw joint 29.35 5600-3140 N43 PVC barrel plug, dia. 40-70 mm 19.55 5600-3150 N445678910111111Rechargeable battery without charger for Accu/EnergyOne 94.30 5900-3010 N4Charger for battery Accu/EnergyOne 51.70 5900-3015 N4Power supply unit incl. connector for Accu/EnergyOne 106.20 5900-3020 N4Drive without rechargeable battery/power supply unit 172.15 5900-3030 N4Discharge tube 16.35 5900-3040 N4Discharge hose 1.2 m, with nozzle 57.55 5900-3045 N4Closing cap thread 3/4’’ 3.40 8535-0034 N3Pump station Accu/EnergyOne, submersible length 50 cm 106.90 5900-3050 N4Pump station Accu/EnergyOne, submersible length 70 cm 111.10 5900-3070 N4Pump station Accu/EnergyOne, submersible length 100 cm 115.20 5900-3100 N4Light- and high-performance pump to transfer small quantities ofwatery media up to 300mPas from canisters, barrels and narrowneckedcontainers from 32 mm opening diameter. PP Splash-water protected motor 230 V/200 W (IP44) Built-in safety key as on/off switch Seal-less pump mechanism for acids and alkalis Thread connection 1” with hose connector 3/4” Incl. 1.5 m PVC hose 3/4”, PP nozzle and wall bracketAttention! Make sure to pay attention to the “List of ChemicalResistance“!Laboratory pump mains operatedImmersion Pump capacity Pumping height Tube Ø mm Price € Item no.depth cm approx. l/min water column m70 75 7 32 690.60 5700-2200 N2100 75 7 32 744.75 5700-4400 N2AccessoriesDescription Price € Item no.Flow meter PP 1” (see page 38) 519.70 5700-0111 N2www.buerkle.de | info@buerkle.de | Hotline +49 (0) 76 35 8 27 95-0

Electric barrel pump Petro | for Diesel oil, class D/II fuel oilElectric barrel pump for pumping diesel oil, CategoryEL fuel oil, undiluted radiator antifreeze and otherliquids of Hazard Category AIII (VbF).Built-in siphon protection prevents leaks if the tube isfaulty. Available for 230 V. Available with eitherstandard filling nozzle or filling nozzle with automaticshut-off. Electronic volume readout with cumulativetotal and suitable for calibration (supplied uncalibrated),available as accessory.With manual suction pumpVDE tested, motor with thermal protection switchBarrel thread M 64 x 4 and 2”Suction hose with filter 1.60 m lengthPump hose made of Perbunan, 4 m length, withbend protection spring and pump nozzleNot suitable for aqueous/diluted liquids!Electric barrel pump PetroModel Pump capacity approx. l/min Price € Item no.standard 40 246.35 5780-0040 N2automatic 40 396.50 5780-0041 N2AccessoriesDescription Price € Item no.Volume readout Petro 284.25 5780-0020 N2Petro flow counter35

Drum pump for acids and alkalisDrum pump for concentrated acids/alkalisBarrel pump for weaker acids, such as hydrochloric acid, phosphoricacid, chromic acid, battery acid, citric acid, etc. Motor 230 V Pump tube PP, shaft Hastelloy C Thread connection 1 1/4” with hose connector 3/4” 2 m PVC fabric hose 3/4” PP pump nozzle PP barrel screw joint Pump height 19 mWS, pump capacity 85 l/minAttention! Make sure to pay attention to the “List of ChemicalResistance“!Drum pump for acids and alkalisImmersion depth cm Tube Ø mm Price € Item no.100 41 1200.65 5762-0100 N2120 41 1214.15 5762-0101 N2AccessoriesDescription Price € Item no.Flow meter PP 1 1/4” (see page 38) 513.35 5700-0121 N2Barrel pump for highly aggressive acids and alkalis, such as sulphuricacid, nitric acid, hydrofluoric acid, sodium hypochlorite etc. Motor 230 V PVDF pump tube Thread connection 1 1/4” with hose connector 3/4” 2 m special chemical hose 3/4” PVDF pump nozzle PP barrel screw joint Pump height 17 mWS, pump capacity 80 l/minAttention! Make sure to pay attention to the “List of ChemicalResistance“!Drum pump for concentrated acids/alkalisImmersion depth cm Tube Ø mm Price € Item no.100 41 2259.45 5762-0200 N2120 41 2372.80 5762-0201 N2AccessoriesDescription Price € Item no.Flow meter PVDF 1 1/4” (see page 38) 732.05 5700-0141 N236www.buerkle.de | info@buerkle.de | Hotline +49 (0) 76 35 8 27 95-0

Drum pump for mineral oilsDrum pump for solventsBarrel pump for light viscous mineral oil products, such as diesel,fuel oil, hydraulic fluid, machinery and motor oil, etc.Barrel pump for highly flammable hydrocarbons such as ethanol,benzine, butanol, isopropanol, kerosene, methanol, etc.Motor 230 VPump tube made of aluminiumHose connection Alu 1”2 m PVC fabric hose 1”Hose clips 1”Alu pump nozzle, PP barrel screw jointMedium-contacting parts made of aluminium and V4A (1.4571)Delivery pump height 19 mWS, Pump capacity 85 l/minMotor 230 VPump tube made of stainless steelVoltage balancing cableHose electrically-conductive2 m solvent hose 3/4”Brass pump nozzlePP barrel screw jointDelivery pump height 14 mWS, pump capacity 95 l/minAttention! Make sure to pay attention to the “List of ChemicalResistance“!Attention! Make sure to pay attention to the “List of ChemicalResistance“!Drum pump for mineral oilsImmersion depth cm Tube Ø mm Price € Item no.100 41 1307.45 5763-0100 N2Drum pump for solventsImmersion depth cm Tube Ø mm Price € Item no.100 41 2589.50 5763-0301 N237

Flow metersOil-free double-diaphragm pumpCompact electronic flow counter for electrical barrel and containerpumps. For thin fluid media.Measuring according to the turbine wheel principleCounter can be calibrated depending on the mediumDifferent versions for many different applicationsAutomatic switch-on when flow is recognisedMeasuring accuracy ±1%, easy recalibrationLong-life lithium batteryFor use up to max. 4 barPneumatic double-diaphragm pump to pump viscous, corrosive,abrasive and flammable liquids. Pump model 1/4“. The pump isavailable in the materials polypropylene, PVDF and nylon. The membranes,balls and valve seats are available in Geolast, PTFE and Santoprene.Solids up to 1.6 mm Ø can be transported.Flow meterMaterial Model Measuring Connector Price € Item no.range l/min threadPP, HastelloyC4, FKMfor fuel oil, diesel,hydrochloric acid, sod.hy droxide, etc.5 – 90 G 1 1/4” 513.35 5700-0121 N2PP, HastelloyC4, FKMPVDF, HastelloyC4, FKMfor fuel oil, diesel,hydrochloric acid, sod.hy droxide, etc.for highly aggressiveliquids like chlorinebleaches, nitric acid,sulfuric acid, etc.5 – 90 G 1” 519.70 5700-0111 N25 – 90 G 1 1/4” 732.05 5700-0141 N2Max. pump capacity 16 l/minSuction height dry 6 mSelf-primingOperating compressed air min. 1.4 bar, max. 6.8 barMax. temperature 66°CInlet side/outlet side 1/4” inner threadOil-free double-diaphragm pumpModel Material Price € Item no.for water-based liquids, lubricants, housing PP, diaphragm. 364.15 5765-0001 N2mineral oilGeolastfor corrosive liquids, inorganic acids and housing PP, diaphragm. 513.35 5765-0002 N2alkalisPTFEfor water-based liquids, sodium hydroxide housing PP, diaphragm. 378.70 5765-0003 N2solutionSantoprenefor strong acids and alkalis, increasedtemperatureshousing PVDF, diaphragm.PTFE637.95 5765-0004 N238www.buerkle.de | info@buerkle.de | Hotline +49 (0) 76 35 8 27 95-0

Magnetic centrifugal pumpsAirJet Mini vacuum pump/compressor1 2The magnetic centrifugal pumps are suitable for transferring acids,alkalis, alkaline and electroplating baths, photography chemicals aswell radioactive, sterile and highly corrosive liquids. The drive, viacontact-free magnetic force transfer, requires no dynamic shaftseals and this makes a hermetically sealed pump housing possible,which means that it cannot leak. Seal-less Surrounding temperature max 45 °C Operating temperature max. 60 °C Viscosity max. 20 mPasMagnetic centrifugal pump 15 Watts, motor 230 V, material PP (reinforcedwith fibre glass), stainless steel (shaft), Rulon (bearing), FKM(seal). Pump capacity 1 to 12 l/min, delivery height up to 2 m Without thread, hose nozzle 14 mmMagnetic centrifugal pump 29 Watts, motor 230 V, material PP (fibreglass reinforced), stainless steel, Rulon (bearing), FKM (seal), ceramics(shaft). Pump capacity 1 to 24 l/min, delivery pump height up to 3 m Suction connection / pressure connection G 3/4” outer thread (BSP)Magnetic centrifugal pumpModel Price € Item no.1 15 Watt, no thread connection, with tubing nozzle 356.15 5766-0001 N22 29 Watt, with R 3/4” outer thread 368.35 5766-0002 N21The AirJet Mini single-head membrane vacuum pump is suitable fora variety of applications in the laboratory and industry. The dry runningmembrane vacuum pump is able to pump, compact and evacuate100% oil-free, which means it does not distort results or addimpurities, and can also be used as a compressor. The AirJet Mini isused to pump and evacuate air and neutral or slightly aggressive orcorrosive gases and vapours. Weight 1.9 kg, dimensions LxWxH 164/90/141 mm Hose connection ID 4 mm Maintenance-free, environmentally friendly High level of gas tightness Very quiet with low vibrationsAttention! Make sure to pay attentionto the “List of Chemical Resistance“!2 31 AirJet Mini vacuum pump/compressorModelPump capacity Vacuum Pressure Price € Item no.approx. l/min mbar max. barMembrane made of EPDM 6 100 2,4 312.00 5625-2000 N2Membrane made of PTFE 5,5 160 2,5 376.90 5625-2001 N2AccessoriesDescription Price € Item no.2 AirJet Mini fi ne regulation head 68.00 5625-2002 N23 AirJet Mini sound absorber 11.50 5625-2003 N239

Siphon with stopcock | for occasional drawing off of liquidsDevice for easy operation to quickly fill off watery liquids from containershigher up to containers lower down.Works according to the siphoning principle: Liquid needs only to beprimed once, therefore especially handy for complete emptying of acontainer.LDPE/PVCPump capacity 9l/minWith robust ball valve made of PPGood view of medium due to transparent hosesBend protection for the hose with suspension eyeletCost-effective filling unit if drawing-off does not need to takeplace regularlyOffered also as rigid immersion tube upon request.Siphon with stopcockMaterialLDPE/PVC/PPImmersiondepthcmHoseinner dia.mmPumpcapacityapprox. l/minPrice €QuantityscalefromScaleprice €Item no.100 15 9 41.40 10 37.65 5605-1000 N440www.buerkle.de | info@buerkle.de | Hotline +49 (0) 76 35 8 27 95-0

Viscosity of liquidsThe right pump for each liquidPumps are used in widely different fields of application. Bürkle offersa large number of different versions. However, when choosing asuitable pump several criteria must be considered. The most importantare the viscosity, structure and density of the liquid.How the liquid behaves under the influence of external influences,e.g. variations in temperature and pressure, is also important.We would be pleased to help you make certain that you choose thecorrect pump for your application.Viscosity using motor oil as an exampleEveryone has heard of the viscosity terms for motor oil. This classificationis based on the flow behavior of the motor oil as a function ofthe temperature. In Winter low-viscosity oils are required. In Summerthe oil becomes hotter, but it must still remain sufficiently thick.For example: SAE 5W-40. The first number defines the viscosity at0 °F (-18 °C), the second for a temperature of 210 °F (99 °C). An oilwith the classification 5W (W=Winter) is therefore thinner than a15W motor oil under cold conditions.Viscosity – what actually is viscosity?The viscosity characterizes the flow behavior of a liquid. Highviscosityliquids are thick, low-viscosity liquids thin. This viscosityresults from intermolecular forces; these are also known as theinternal friction. This internal friction decreases as the temperatureincreases and increases as the temperature decreases.The dynamic viscosity is given in Pas, for low-viscosity liquids in mPas.It is defined as the force in newtons that is necessary to displace aliquid layer of 1 m 2 and 1 m height along a boundary parallel to asecond layer at a speed of 1 m·s -1 .Typical viscosity values in mPas at 20 °CKerosine 0,65Coffee cream ~ 10Hydraulic oil ~ 120Water 1,0Glycol 40Motor oil 15W40 390Grape juice 2 – 5Olive oil ~ 100Honey ~ 10 00041

Stopcocks | completely water-tight, easily operated21The StopCock discharge cocks fits allcontainers with R 3/4“ connectionthreads. Thread adapters facilitate connectionof cocks to nearly all containers. Tight-closing for complete seal Especially effortless With connecting cap nut, guaranteedvertical position of the cock Pressure-resistant up to 2 bar at20 °C (without discharge bracketand grommet)Stopcock angled With discharge angle and rotatablespout preventing drips With tapered spout for bottles withnarrow openings with a diameterfrom 6 to 8 mm. Media-contacting parts PP, PE andPTFENot suitable for solidifyingsubstances!Thread, inflowing side Thread, outflowing side Price € Quantity scale from Scale price € Item no.1 3/4’’ inner thread cap nut spout/nozzle 20.30 10 18.15 0525-1000 N4Stopcock straight-throughThread, inflowing side Thread, outflowing side Price € Quantity scale from Scale price € Item no.2 3/4’’ outer thread 3/4’’ outer thread 22.45 10 20.35 0525-3000 N43 3/4’’ inner thread cap nut 3/4’’ outer thread 20.15 10 18.20 0525-5000 N44 3/4’’ inner thread cap nut 3/4’’ inner thread cap nut 23.90 10 21.75 0525-7000 N453 4AccessoriesVarious designs of the stopcock.Connecting thread3/4” with union nut or externalthreadDescription Price € Item no.5 Hose nozzle StopCock 4 mm 8.95 0525-1304 N4Hose nozzle StopCock 6 mm 8.95 0525-1306 N4Hose nozzle StopCock 8 mm 8.95 0525-1308 N4Hose nozzle StopCock 10 mm 8.95 0525-1310 N4Hose nozzle StopCock 12 mm 8.95 0525-1312 N4Hose nozzle StopCock 16 mm 8.95 0525-1316 N4Discharge angle 7.70 0525-1400 N442www.buerkle.de | info@buerkle.de | Hotline +49 (0) 76 35 8 27 95-0

Ball valve PPBall valves PP for barrels | leakproofBall valve PP fits all containers with R 3/4“ connection thread. Itcan be attached to nearly all containers with thread adapters. Robustindustrial quality, large flow. Suitable for solidifying media Max. 4 bar pressure at 20°C With connecting cap nut, guaranteed vertical position of thevalve Incl. discharge angle Hose nozzle 16 mm Ø Nominal width 12 mm ØBall valve PPPrice € Quantity scale from Scale price € Item no.48.30 5 44.30 0500-0100 N4AccessoriesDescription Price € Item no.Sealing tape PTFE 1.45 0006-4514 N3Ball valves for barrels made of PP for barrels with thread connections. Suitable for solidifying media Max. 4 bar pressure at 20 °C Individually adaptable, through various accessoriesBall valves PP for barrelsThread,inflowingsideThread,outflowingsideNominalwidth mmPrice €Quantityscale fromScaleprice €Item no.1/2’’ outer 1/2’’ inner 15 37.65 10 34.10 0500-0112 N43/4’’ outer 3/4’’ inner 20 43.35 10 39.10 0500-0134 N41’’ inner 1’’ inner 25 46.70 5 42.15 0500-8001 N31/2’’ inner 1/2’’ inner 15 33.60 5 30.15 0500-8002 N33/4’’ inner 3/4’’ inner 20 38.35 5 34.40 0500-8003 N3AccessoriesDescription Price € Item no.Tube nozzles, fi xed, straight 1/2” outer 1.08 8545-0012 N3Tube nozzles, fi xed, straight 3/4” outer 1.23 8545-0034 N3Tube nozzles, fi xed, straight 1” outer 1.51 8545-0100 N3Tube bend, fi xed, 1/2” outer 1.83 8547-0012 N3Tube bend, fi xed, 3/4” outer 1.88 8547-0034 N3Tube bend, fi xed, 1” outer 2.67 8547-0100 N3Adapter for ball valve, Coarse thread Mauser 2” outer, 3/4” inner 3.22 0600-0130 N3Adapter for ball valve, Coarse thread Tri-Sure ® 2” outer, 3/4” inner 1.72 0600-0140 N3Adapter for ball valve, Fine thread 2” outer, 3/4” inner 6.30 0600-0180 N3Sealing tape PTFE 1.45 0006-4514 N343

Compact stop cockThe spigot Compact for canisters and barrels captivateseveryone through its compact build, whichmakes the valve on the canister ideal for use in refrigeratorsand on racks, etc. The short discharge doesnot protrude out over the lower edge of the container,which makes the valve a perfect choice even whenspace is very limited.The discharge’s specially optimised design creates aneven stream of liquid with no splashing or spattering.The spigot features easy motion and a tight seal. It isscrewed on with a connecting cap nut. This guaranteesa vertical position of the valve and makes it possibleto adjust the valve later on.The Compact spigot fits all containers with R 3/4”connecting threads.PP, PE and PTFE are materials that offer outstandingchemical resistance to acids and alkalis.The Compact spigot is the ideal addition to Flachmannjerrycans – for perfect storage and filling whenspace is at a premium!Space-saving designOptimised discharge for even flowWith connecting union nut for vertical position ofthe stop cockTight-closing for complete sealCompact stop cockThread, Price € Quantity Scale price € Item no.inflowingsidescale from3/4’’ innerthread capnut13.25 10 11.00 0530-1000 N444www.buerkle.de | info@buerkle.de | Hotline +49 (0) 76 35 8 27 95-0

Compact jerrycan & StopCock setCompact jerrycan & Compact stop cock setThe Compact stop cock is the ideal addition to Flachmann jerrycans– for perfect storage and filling when space is at a premium!The space-saving set consists of the compact Flachmann jerrycanwith glands (0435-2050) and the spigot Compact (0530-1000).The Compact jerrycan & StopCock set consists of the compact jerrycanFlachmann with glands (0435-2050) and the spigot StopCock(0525-1000).Compact jerrycan & StopCock setPrice € Quantity scale from Scale price € Item no.46.50 10 41.75 0435-0001 N4Compact jerrycan & Compact stop cock setPrice € Quantity scale from Scale price € Item no.38.50 10 33.70 0435-3000 N445

StopCock PA, electroconductiveSpigot “Brass”Assessment of IgnitionRisks, usable in:Zone 0Explosion groupsII A, II BDEKRA EXAM GmbHIdentification N o. 0158testedBarrel tap for petrochemical liquids, closedindependently when not used (increasedsafety), thread connection 3/4” on the outside.Commercially available spigots made of the materials polyethylene or polypropylene cannotbe used for solvents.The spigot StopCock PA is made of electrically conductive polyamide and therefore perfectlysuitable for solvents.StopCock PA fits onto 3/4” outer threads and with the supplied adapter onto 3/4” innerthreads and therefore onto nearly all commercially available canisters and barrels wherethe discharge thread is at the bottom.NW 10 mm With discharge angle and rotatable spout preventing drips With tapered spout for bottles with narrow openings with a diameter from 6 to 8 mm. Media-contacting parts PA conductive to electricity and PTFE Supplied with PA adapter conductive to electricity for 3/4” inner threadStopCock PA, electroconductiveThread, inflowing side Thread, outflowing side Price € Quantity scale Scale price € Item no.from3/4’’ inner thread cap nut spout/nozzle 21.50 10 19.45 0525-1100 N4Spigot “Brass”Price € Quantity Scale price € Item no.scale from36.15 10 32.60 0535-0010 N346www.buerkle.de | info@buerkle.de | Hotline +49 (0) 76 35 8 27 95-0

Spigot “Air”Ball valve PP, foodBall valve made of PP with outer / inner thread, fibre-glass reinforced, ball made of PP, handlewith O-ring made of food-safe NBR and seal made of HDPE.No additional ventilation opening required,PE, transparent, 3/4” thread connection outside.Max. operating pressure 10 bar (at +20°C)Max. operating temperature 100°CSuitable for foodHose angle bracket, 90°,with cap nut, inner threadand reducing nozzle. Self-venting NW 13 mm Seal made of natural rubberSpigot “Air”Price € Quantity Scale price € Item no.scale from5.90 25 5.30 0533-0010 N3Ball valve PP, foodThread, inflowing Thread, outflowingNominal width Price € Quantity scale Scale price € Item no.sideside mmfrom1/2’’ inner M29x1,75 outer 15 13.25 10 12.00 0500-8102 N33/4’’ inner M36x3 outer 20 15.80 10 14.30 0500-8103 N31’’ inner M42x3 outer 25 19.10 10 17.15 0500-8101 N31/2’’ outer M29x1,75 outer 15 14.75 10 13.25 0500-8202 N33/4’’ outer M36x3 outer 20 17.25 10 15.55 0500-8203 N31’’ outer M42x3 outer 25 20.90 10 18.80 0500-8201 N3AccessoriesDescription Price € Item no.Container connection, white 1/2’’ outer 7.60 8533-0012 N3Container connection, white 3/4’’ outer 8.80 8533-0034 N3Container connection, white 1’’ outer 9.30 8533-0100 N3Tube bend with cap nut, thread M29x1,75 3.22 8548-0020 N3Tube bend with cap nut, thread M36x3 3.55 8548-0025 N3Tube bend with cap nut, white, thread M42x3 4.24 8548-0030 N3Sealing tape PTFE 1.45 0006-4514 N347

Spigot Jumbo, whiteSpigot Jumbo, with tapBarrel valveSpigot with spindle for R2” barrel thread,50 mm flow, for viscous media such as lacquers,glue, shampoo.PE, whiteSeal made of black nitrileDischarge with R 2” fine thread outsideSpigot with tap for R2” barrel thread, 50mm flow, for viscous media such as lacquers,glue, shampoo.Cost-effective tapPE, brownSeal made of EPTThe barrel valve enables quick and cleanemptying even with highly viscous liquids.It is suitable for metal barrel with 2” BSPTriSure metal barrel screw joint.The barrel valve enables opening the barrelclosure as well as emptying and reclosing iteven with lying, full barrels without havingto move them.Spigot Jumbo white, with spindlePrice € Quantity Scale price € Item no.scale from84.05 5 76.10 0534-0010 N4Spigot Jumbo, with tapPrice € Quantity Scale price € Item no.scale from25.65 10 25.15 0534-0020 N4Barrel valvePrice €Item no.124.40 0536-0010 N348www.buerkle.de | info@buerkle.de | Hotline +49 (0) 76 35 8 27 95-0

IBC discharge valvesThe IBC discharge valve is a sturdy, high-quality ball valve with ahose connection and connection adapter including seal, for standardthread S 60x6 external or 2” internal, designed to fit all commonlyused European IBC containers.With the appropriate thread, the discharge valve can also bescrewed directly onto the original discharge valve that is already onthe IBC tank if the original valve is leaking or faulty. In this way theIBC discharge valve ensures fast and reliable residual emptying ofthe container with good dosing.The discharge valve is an indispensable accessory to ensure a professionalconnection of the hose or for filling from your IBC container.Martin Schweizer, quality managerand wine-grower:“ ‘Small problems’ withvalves are especiallyfrustrating in large tanks.I need professionalequipment forprofessional work.You too?!“1” flowSuitable for connection threads S 60x6 external or 2” internalDischarge valve and PP fibreglass-reinforced sealing cap, ball,adapter and PP hose connectionMax. operating pressure 10 bar (at +20°C)Max. operating temperature 80°C1 IBC discharge valve with 90° hose nozzle and sealing cap. Thehose can also be closed with the enclosed sealing cap. Hose nozzleexternal Ø 30 mm, suitable for flexible hoses.2 IBC discharge valve with innovative hose screw connection Thehose screw connection allows you to attach a wide range of hosesquickly, easily and reliably. No additional hose clamp is needed.Hose fitting, external Ø 25 mm.121IBC discharge valve with angle dischargePrice € Quantity scale Scale price € Item no.from54.80 5 50.40 0534-0002 N32IBC discharge valve with hose screw connectionPrice € Quantity scale Scale price € Item no.from54.80 5 50.40 0534-0001 N349

LiquoFill filler for fluidsMetering accuracy +/- 0.5 %300-800 fillings per hourSelf-feedingAccessories:Height-adjustable filling table made of stainlesssteel for positioning the containerNozzles with/without sieve, different diametersDiaphragm valves (for viscous products) and drippreventer (for products with low surface tension),only possible in pneumatic and semi-automaticdrive50www.buerkle.de | info@buerkle.de | Hotline +49 (0) 76 35 8 27 95-0

LiquoFill filler for fluidsThe LiquoFill fillers were specially developed for exactmetering and filling of fluids of all types. LiquoFill ishandy especially in small series, as the purchase of astationary filling station designed in large series is oftennot profitable.The metering and filling devices are used in productionsites and laboratories for cosmetic, pharmaceuticaland chemical products, paints as well as in thefood and beverage industry.LiquoFill is ready to operate, simple to handle andeasy to clean. The fillers can be mounted on the tableusing a fastener or screwed directly on to the table;they are portable and therefore usable at differentplaces.The fill quantity can be calibrated precisely and continuouslyusing an adjusting nut, without any toolsand can be read at a display.The adaptable hand lever facilitates use by bothright- and left-handed individuals.Parts in contact with the medium are made of stainlesssteel V4A (1.4404/1.4571), springs V2A (1.4310),PTFE and FCR (Fluorocarbon rubber). Housing madeof aluminum, protection hoods made of stainlesssteel.When ordering, pleasestate the material tobe filled. We will testthe chemical resistance.Please always indicatethe desired sizewhen ordering fillingtubes.Different filling nozzles (Ø4/3 mm - Ø16/14 mm, with/without sieve) facilitate individual filling of diversecontainers such as bottles, tubes, nozzles, crucibles orglasses.51

LiquoFill filler for fluidsLiquoFill filler, manual mode of operationVolumetric piston meter with manual drive.The fillers with manual operation can alsoretrofitted with the pneumatic drive.Housing dimensions: LxWxH 690 x 150 x350 mm.LiquoFill filler, pneumatic mode of operationVolumetric piston meter with pneumaticdrive, with star contact via foot-operatedswitch. For the pneumatic devices, compressed-airsupply of 4 - 6 bar is required.Housing dimensions: LxWxH 1200 x 150 x400 mm.LiquoFill pro filler, semi-automatic driveCost-effective semi-automatic filling machinewith reproducible speed setting. Withstart contact via foot-operated switch.With handwheel and display for precise,stepless adjustment of the metering volume.Housing dimensions: LxWxH 1150 x 135 x370 mm.LiquoFill filler, manual mode of operationDosing Filling nozzle Price € Item no.volume ml dia. mm8 - 80 6/4 2950.75 5913-0020 N020 - 210 8/6 3135.20 5913-0200 N050 - 500 10/8 3319.50 5913-0500 N0AccessoriesDescription Price € Item no.Height-adjustable fi ller 507.30 5913-0001 N0LiquoFill fi lling funnel, approx. 10l 1180.35 5913-0002 N0LiquoFill exchange kit, 8 - 80 ml 737.80 5913-0003 N0LiquoFill exchange kit, 20 - 210 ml 756.35 5913-0004 N0LiquoFill exchange kit, 50 - 500 ml 876.15 5913-0005 N0LiquoFill seal kit for 5913-0020, -2020 169.80 5913-0006 N0LiquoFill seal kit for 5913-0200, -2200 243.50 5913-0007 N0LiquoFill seal kit for 5913-0500, -2500 302.60 5913-0008 N0LiquoFill filler, pneumatic mode of operationDosing Filling nozzle Price € Item no.volume ml dia. mm8 - 80 6/4 4333.75 5913-2020 N020 - 210 8/6 4702.60 5913-2200 N050 - 500 10/8 4887.05 5913-2500 N0AccessoriesDescription Price € Item no.Height-adjustable fi ller 507.30 5913-0001 N0LiquoFill fi lling funnel, approx. 10l 1180.35 5913-0002 N0LiquoFill exchange kit, 8 - 80 ml 737.80 5913-0003 N0LiquoFill exchange kit, 20 - 210 ml 756.35 5913-0004 N0LiquoFill exchange kit, 50 - 500 ml 876.15 5913-0005 N0LiquoFill seal kit for 5913-0020, -2020 169.80 5913-0006 N0LiquoFill seal kit for 5913-0200, -2200 243.50 5913-0007 N0LiquoFill seal kit for 5913-0500, -2500 302.60 5913-0008 N0LiquoFill pro filler, semi-automatic driveDosing Filling nozzle Price € Item no.volume ml dia. mm5 - 60 6/4 6860.20 5913-4060 N030- 300 8/6 6902.90 5913-4300 N080 - 1050 10/8 7158.25 5913-4550 N0AccessoriesDescription Price € Item no.Height-adjustable fi ller 507.30 5913-0001 N0LiquoFill fi lling funnel, approx. 10l 1180.35 5913-0002 N0LiquoFill pro exchange kit, 5 - 60 ml 737.80 5913-4001 N0LiquoFill pro exchange kit, 30 - 330 ml 783.85 5913-4002 N0LiquoFill pro exchange kit, 80 - 1050 ml 1069.75 5913-4003 N0LiquoFill pro seal kit for 5913-4060 206.75 5913-4004 N0LiquoFill pro seal kit for 5913-4300 243.50 5913-4005 N0LiquoFill pro seal kit for 5913-4550 368.95 5913-4006 N0Pneumatic drip preventer 1300.30 5913-2000 N052www.buerkle.de | info@buerkle.de | Hotline +49 (0) 76 35 8 27 95-0

PastoFill filler for pasty substancesThe PastoFill filler was specially developed for manual filling of highly viscous products.PastoFill is handy especially in small series, as the purchase of a stationary filling stationdesigned mostly in large series is often not profitable.The metering and filling devices are used in production sites and laboratories for cosmetic,pharmaceutical and chemical products, creams, salves as well as in the food and beverageindustry.PastoFill is ready to operate, simple to handle and easy to clean. The fillers can be mountedon the table using a fastener or screwed directly on to the table; they are portable andtherefore usable at different places.The fill quantity can be calibrated precisely and continuously using an adjusting nut, withoutany tools and can be read at a display.Parts in contact with the medium are made of stainless steel V4A (1.4404/1.4571), PETP,NBR, PTFE and FCR (Fluorocarbon rubber). Housing made of cast aluminum. Housing dimensions:LxWxH 740 x 500 x 510 mm.Different filling nozzles (Ø4/-4 mm - Ø22-20 mm) facilitate individual filling of diverse containerssuch as bottles, tubes, nozzles, crucibles or glasses. Do not forget to indicate the desiredsize while ordering filling nozzles.Including feeding funnels 10 lMetering accuracy +/- 0.5 %300 - 600 fillings per hourSelf-feeding made of stainless steel funnelAccessories: Filling nozzles for crucible and tube filling in different diameters Cover for feeding funnelWhen ordering, please state the materialto be filled. We will test the chemicalresistance. Please always indicatethe desired size when ordering fillingtubes.PastoFill filler for pasty substancesDosing volume ml Filling nozzle dia. mm Price € Item no.10 - 160 14/12 4425.95 5913-1160 N030 - 260 14/12 4887.05 5913-1260 N0AccessoriesDescription Price € Item no.PastoFill exchange kit for 5913-1160, 3 - 15 ml 1079.00 5913-1110 N0PastoFill exchange kit for 5913-1260, 10 - 50 ml 1079.00 5913-1111 N053

Wall-mounted dosing machine | precise dosingWall mounted dosing machines for simple, clean and precise dosing of resins, lacquers, peroxides,epoxies and many other pumpable materials - without sticking and contaminating.For fixed use in the work place.Use1. Push the pump lever upwards. Read thedosage amount from the blue graduationon the glass cylinder.2. Push the pump lever downwards. Theliquid is pumped via the spigot directlyinto the container which is to be filled.Materials: Glass, PTFE, PA and stainless steelEasy cleaningWall mounting preparedPA suction hoseWall-mounted dosing machineDosing volume ml Suction hose dia. mm Division ml Price € Item no.100 10 1 637.90 5912-0100 N2250 22 5 1013.95 5912-0250 N2500 29 5 1247.35 5912-0500 N254www.buerkle.de | info@buerkle.de | Hotline +49 (0) 76 35 8 27 95-0

Drain safety standGeneral pump accessoriesThreads can be ideally sealed with the sealing tape for threads madeof PTFE. Low abrasion, excellent chemical resistance, temperature resistantfrom -80°C to + 260°C.Sealing tape PTFEPrice € Quantity scale from Scale price € Item no.1.45 10 1.31 0006-4514 N3Universal barrel key for effortless opening even of tight barrel closures3/4” to 2”. An unbreakable tool made of zinc-plated steel.Universal barrel spannerPrice € Quantity scale from Scale price € Item no.24.15 10 21.65 5690-0090 N4Residual liquid from pump tubes or samplerscan be reliably collected with the drainsafety stand. The safety stand is resistant todiluted bases and acids. The collecting containercan be filled with a neutralisationmedium which dilutes and neutralises residualliquid.The stand pipe is mounted on the wall withsturdy pipe clamps. The pipe clamps cansimply be opened to remove the safetystand.The container for collecting liquid can beunscrewed, making it convenient to replaceor empty.Drain safety standPrice € Quantity scale from Scale price € Item no.42.25 5 38.05 5618-1000 N4Hexagonal nut withinner thread.PEFlat seals made ofPolyethylene, transparentfitting outeror inner thread.Hexagonal nutsThread For dia. mm Price € Quantity scale from Scale price € Item no.1/2’’ 27 1.88 10 1.72 8537-0012 N33/4’’ 36 2.14 10 1.95 8537-0034 N31’’ 46 2.34 10 2.15 8537-0100 N32” 3.50 10 3.16 8537-0200 N3Flat seals, PEThread Model Pieces per pack Price € Quantity scale from Scale price € Item no.1/2’’ fi ts outer thread 10 2.24 10 2.03 8538-0012 N33/4’’ fi ts outer thread 10 2.32 10 2.26 8538-0034 N31’’ fi ts outer thread 10 4.62 10 4.20 8538-0100 N32 fi ts outer thread 10 11.25 10 10.10 8538-0200 N31/2’’ fi ts inner thread 10 2.24 10 2.03 8539-0012 N33/4’’ fi ts inner thread 10 2.32 10 2.26 8539-0034 N31’’ fi ts inner thread 10 4.62 10 4.26 8539-0100 N3PE55

Rubiflex glovesNitrile glovesPlastic apronSafetyBox12 3With short or long gauntlet.Safe working with fats, mineraloils, solvents and many acidsand alkalis. Made from nitrile rubber Very flexible, soft to the touch High abrasion and cut resistance Comfortable cotton interlockinterior To standard EN 374Made of nitrile, proven whenhandling acids, fats and solvents.Plastic apron made of PVC witheyelets, neck band and waistband welded into the apron, industryquality, black, fabric reinforced,size 80 cm x 100 cm.Attention! Make sure topay attention to the “Listof Chemical Resistance“!Panorama safety goggles andprotective gloves made of nitrilefor personal safety, storedcleanly in a box. Recommendedby trade associations.Attention! Make sure topay attention to the “Listof Chemical Resistance“!Attention!Make sure to pay attention to the “List of Chemical Resistance“!Rubiflex protective glovesModel Length cm Price € Quantity scale from Scale price € Item no.1 standard 37 22.30 10 20.40 2507-0002 N32 long wrist 60 42.70 10 38.80 2507-0003 N3Protective gloves nitrilePrice € Quantity scale from Scale price € Item no.3 6.20 10 5.65 2507-0004 N3Plastic apron made of PVCPrice € Quantityscale price €Scale Item no.from25.25 10 23.05 2507-1001 N3SafetyBoxPrice € Quantityscale price €Scale Item no.from35.45 10 32.05 2507-9000 N356www.buerkle.de | info@buerkle.de | Hotline +49 (0) 76 35 8 27 95-0

EyesFresh mini eyewash stationEye rinsing bottleEmpty bottle for 600 ml contents, leakproof due tovalve and dust protection cap. Instructions printed on(in German language), made of transparent PE.Ideal for the lab, filling stations or all work places where aggressive substancesare used. „Eyes Fresh“ can be attached to any standard cold water tap. For normaluse of the tap, just press the button and the function changes back from theeye wash (returns automatically to eyewash-function when the tap is closed). Canbe fitted onto taps with M22x1, 1/2“ or 3/8“ outer thread.EyesFresh mini eyewash stationModel Price € Quantity scale from Scale price € Item no.Press button for normaluse127.80 5 117.55 2515-0100 N4Eye rinsing bottlePrice € Quantity scale from Scale price € Item no.28.10 10 25.45 2507-2000 N3Wall fixturePrice € Quantity scale from Scale price € Item no.14.60 10 13.95 2507-2001 N357

Eye protection / safety gogglesUltra light build of only 18 grammes total weight.Maximum flexibility, perfect and slip-free fit.Safety goggles UltralightColour Price € Quantity Scale price € Item no.scale fromblue 22.30 5 21.30 2502-1002 N3Ultra-light protective goggles with sporty design,maximum wearing comfort, according to DIN/ENstandard.Casual style safety gogglesColour Price € Quantity Scale price € Item no.scale fromblue/orange 23.45 5 22.20 2502-2010 N3Over-goggles with hingeless side pieces and with softside piece ends. Combines the advantages of goggleswith side pieces with the wearing properties of headbands.The flexible side piece design allows it toadapt to different wearing situations, with or withoutglasses. DIN EN 166 - 168 and 170.Safety goggles UltraflexColour Price € Quantity Scale price € Item no.scale fromblue 25.15 5 23.85 2502-1003 N3With anatomically designed wrap-around screen foran increased degree of safety. Unrestricted view in alldirections, larger cover by 20% compared with normalglasses with side pieces, UV protection up to 400nm.Safety goggles StyleColour Price € Quantity Scale price € Item no.scale fromblack 17.25 5 16.45 2502-1006 N3Lightweight, unrestricted lateral sight, variable sidepieces and side piece length which can be set to 4different lengths guarantee the perfect fit withoutpressure points due to Duo-Flex side pieces, lateralsafety shields integrated in the goggle’s lens, accordingto DIN EN 166-168 and 170.Astrolite safety gogglesColour Price € Quantity Scale price € Item no.scale fromblack/blue 17.55 5 15.85 2502-4000 N3black/red 17.55 5 15.85 2502-4001 N358www.buerkle.de | info@buerkle.de | Hotline +49 (0) 76 35 8 27 95-0

Eye protection / safety gogglesAnti-fog lens, suitable for wearers of glasses, withventilation system, unrestricted lateral view, close fitting,pressure-free fit, according to DIN/EN standard.Ultravision safety gogglesColour Price € Quantity Scale price € Item no.scale fromorange 25.30 5 24.05 2502-1007 N3Various colours, pleasantly light. Good adjustabilityfrom the option for setting the side pieces to 4lengths. Shield made of polycarbonate, resistant tohigh impact with integrated lateral protection. MaximumUV protection.Color safety spectaclesColour Price € Quantity scale from Scale price € Item no.yellow/black 16.65 5 15.35 2502-1004 N3blue 16.65 5 15.35 2502-1005 N3silver gray 16.65 5 15.35 2502-1010 N3violet/green 16.65 5 15.35 2502-1012 N3Very comfortable over-goggles with unrestricted sideview, suitable to go over most glasses. 180° field ofvision, lateral ventilation through the side shields.Side pieces can be adjusted to 4 lengths. Withoutcoating. With Polycarbonate side pieces. According toDIN EN 166 -168 and 170. Ideal as goggles for visitorsExtremely robust eye-wear case with reinforced zipperand belt loop. Suitable for all spectacles, not forsafety goggles Ultravision.Panorama safety gogglesColour Price € Quantity Scale price € Item no.scale fromglass clear 10.10 5 9.20 2502-1001 N3Case with belt loop for all glasses with templeColour Price € Quantity Scale price € Item no.scale fromblack 10.05 5 9.50 2502-1008 N3Very robust large eye-wear case for panoramic goggleswith zipper, belt loop and additional compartment.Suitable for all spectacles and panoramic goggles.Case with belt loop for all glasses and googlesColour Price € Quantity Scale price € Item no.scale fromblack 14.95 5 14.25 2502-1009 N359

Disposal containersDisposal containers are used for safe and reliable temporary storageto collect and dispose of liquid waste such as residual and spent liquids,chemical waste and solvent waste.This waste, generally toxic, is produced on a daily basis in labs, butalso in industrial plants. Unpredictable and dangerous mixtures canalso be produced, especially in containers used for general collection.Unfortunately, the appropriate equipment for dealing with thesewastes professionally is often lacking. If general or specific collectingcontainers are not set up under an exhaust hood, the containersshould be equipped with an exhaust air filter. Without an exhaustair filter, the air is permanently contaminated. In addition to thehealth risk and environmental burden, this can also result in dangerof explosion.Disposal canisterSimple disposal canister withsafety funnel. The safety funnelwith cover, removable dirt sieveand lance for pouring in liquidssafely. The lance directs the liquidinto the container withoutsplashing.Cover funnel with sieve andlanceSpace-saving disposal canisterHDPE funnel, PP canisterDisposal canisterCapacity l Price € Item no.5 125.85 5400-0001 N260www.buerkle.de | info@buerkle.de | Hotline +49 (0) 76 35 8 27 95-0

Disposal container, space-savingDisposal setConductive canisterSpace-saving disposal container for collectingsmall quantities of liquid. Because it requireslittle space, it is also ideal for settingup directly at the workstation, for exampleunder the table. The safety funnel with valvesopens and closes automatically at the touchof a button. Therefor the funnel is only openwhile liquid is being poured through it andharmful vapours cannot escape. The exhaustair filter contains activated carbon and traps99% of volatile substances. Liquids can alsobe directed from closed systems through ahose and into the container with a hose connectoravailable as an accessory. Space-saving container with valve funnel Air filter contains activated carbon Parts in contact with medium HDPE, PP,PTFE Hose connection available as accessoryDisposal container, space-savingCapacity l Price € Item no.5 449.55 5400-0005 N2AccessoriesDescription Price € Item no.Connector for disposal hose 7.80 5400-0012 N2Replacement for exhaust air fi lter,set S 4 pieces209.90 5400-0007 N2Disposal canister and safety funnel with shutoffvalve, for collecting large quantities of liquid.The funnel can be opened and closed forpouring quickly, since only one hand is requiredto operate the shut-off valve. This ensuresthat smaller amounts of harmful vapourscan escape. The exhaust air filtercontains activated carbon and traps 99% ofvolatile substances. The removable dirt sieveholds back foreign objects. Liquids can alsobe directed from closed systems through ahose and into the container with a hose connectoravailable as an accessory. UN-container Air filter contains activated carbon With fill level indicator Safety funnel with shut-off valve Parts in contact with medium HDPE, PTFE Hose connection available as accessoryDisposal setCapacity l Price € Item no.20 572.40 5400-0010 N230 578.55 5400-0015 N2AccessoriesDescription Price € Item no.Connector for disposal hose 7.80 5400-0012 N2Replacement for exhaust air fi lter,set M 3 pieces228.35 5400-0016 N2Electrically conductive disposal canisterwith cover funnel, sieve, fill level indicatorand earthing clamp, ideal for disposing ofsolvent residue. The disposal canister ismade of plastic capable of diverting acharge and prevents electrical charges fromaccumulating. Possible sources of ignitioncan therefore be prevented by earthing withthe earth cable, included with delivery. Thedisposal canister is also suitable for use inprotected areas. HDPE, electrically conductive Including earth cable with earthingclamp, fill level indicator and cover funnelwith dirt sieve.Conductive disposal canisterCapacity l Price € Item no.10 195.60 5400-0020 N261

Table of contentsSamplers & sample divider68 – 69 Sample divider Repro70 – 87 Samplers for bulk goods70 – 75 Zone samplers81 – 84 Samplers for pharmaceutical products84 – 87 Bag/sack samplers88 – 95 Accessories for bulk samplers96 – 100 Samplers for viscous substances101 – 122 Samplers for liquids110 – 117 Vacuum samplers118 – 122 Dipping bottles123 – 130 Disposable & sterile samplers132 – 137 Scoops, scrapers, spoons and spatulas138 – 139 Ice and meat sampling140 – 141 Soil sampling142 – 145 Accessories for samplerswww.buerkle.de | info@buerkle.de | Hotline +49 (0) 76 35 8 27 95-0

Samplers & sample dividerSampling from liquids, bulk goods and viscous media

Take samples – but do it right!Taking samplesWhen taking samples, a random test is taken from an overall quantity.These samples serve as the basis for the analysis regardingquality assurance. The correct procedure for taking spot samples istherefore a very important subject. Only with representative and authenticsamples can reliable information about the quality, propertiesor composition of a particular material be provided.Very precise material analyses can be carried out with the most upto-datetechnology. However, the technology is no good if an erroroccurs when the sample is taken and this error continues throughall phases of the analysis, with the consequence that the final resultof the quality check is wrong.Correct information about the properties of a material can only beprovided if the sample is taken properly and treated in the sameway as in the subsequent analysis. The basic point is that the propertiesand composition of the sample quantity correspond exactlywith the material quantity that has to be evaluated.Taking samples - but how?When taking samples, some essential stipulations such as DINstandardshave to be complied with. The recommendation is to followa company-internalchecklist which should bea fixed component of acompany’s quality standards.All relevant steps fortaking samples are documentedin this checklist sothat they can be traced atany time.Location for taking samplesThe location from where the samples are taken has to be as cleanas possible. At the very least, the use of clean samplers, equipmentand tools has to be considered. During the procedure, no externalfactors must influence the sampling. Even small external contaminationcan significantly alter the examination result. Detergents whichare used to clean the samplers or the sample packaging can alsofalsify the result of the analysis.Taking samples - but who? - Qualified personnelOnly skilled personnel should take the samples. It must be guaranteedthat sampling is carried out exactly in accordance with thestipulated DIN-standards or internal guidelines.Technical knowledge is of utmost importance because altered circumstancescan only be reacted to on-site. Only trained personnelcan quickly and safely recognise mistakes that occur or altered circumstancesand react accordingly.64www.buerkle.de | info@buerkle.de | Hotline +49 (0) 76 35 8 27 95-0

Taking samples - with what? - Sampling equipmentChoosing the right sampling equipmentdepends on many different selection criteria.It depends on the material propertiesof the sampler as well as on the type ofsampling, the container or the site wherethe material is located, and the frequencywith which the sampling has to be carriedout. In addition to individual requirementsfor sampling, all equipment shouldfulfil the basic principles explained below:Sampler materialThe equipment should be made of inertsubstances from which no material cancome loose and which does not react withother substances and therefore cannotcontaminate the sample. The inert substancedepends on the medium to besampled. As a general rule, samplersmade of stainless steel and high-qualityplastic such as PTFE are very suitableCleaning the sampling equipmentIt should be easy and quick to clean the equipment and – under certainconditions – to sterilise it. In the food industry, sterile-packeddisposable samplers are recommended which can be disposed of afteruse.Surface of the equipmentThe samplers’ surfaces have to be especially smooth, for example,electro-polished stainless steel or PTFE. This prevents material frombeing deposited and simplifies cleaning. When selecting the appropriatesampling equipment, you must ensure that it is finished properlyon the inside. Equipment with only a smooth external surfacewill not meet any quality standards.Sampling techniques – physical and analytical samplingA distinction is made between physical and analytical/chemicalsampling.During physical sampling, the bulk density, material distribution,material properties and – if required – colouring or contaminationare determined. It is especially important in this case that the samplerdoes not change or destroy the material’s properties while takingthe sample. A sample taken onsite still has to be transported.During packing and transport, the same high quality standardsshould apply as during sampling, so that the sample reaches thelaboratory unaltered.During analytical sampling, special attention must be paid tocleanliness in addition to the aspects listed above. However, thematerial properties can be disregarded at times because the samplewill be specially processed. In this case, equipment can be usedwhich changes the physical properties of the material.Processing the samplersSamplers must not have any grooves or crevices because residualmaterial collects in such crevices and cannot be easily removed. Thismeans that cross-contamination and memory effects can no longerbe ruled out.65

Sampling techniquestoo, you must pay attention to the cleanliness of the packaging materialand the risk of contamination from loose substances. The samplecontainer is then labelled so that no mix-up can occur and takento the laboratory – if necessary in coolers. Coolers with temperaturemonitors in which the ideal cooling temperature is maintained, arerecommended.AdviceIf samples are taken from sacks or bags, the insertion points mustbe closed again afterwards. For this, special labels should be usedthat stick firmly to dirty surfaces and can be written on.From the left to the right: Point sampling, cross-sectional sampling, bottom samplingCross-sectional samplingA sample is taken through all material layers to provide a representativecross-section.Point samplingA targeted sample is taken from a pre-determined point. This isdone to determine the condition of the material precisely at thispoint, or several point samples are taken over a larger area or in alarge volume container to get an authentic cross-section. All pointsamples together therefore provide a representative cross-section.Completing the sampling procedureAfter the sample has been taken, it must be packed for transport.Clean sampling containers connected directly to the samplingequipment are ideal. The sample hasno contact with the environmentand is packed for transport at thesame time. The same conditions thatrelate to the sampling equipmentalso apply to packaging, storage,and transport of a sample. Here,66Any questions?We will be happy to advise you. Talk to us - telephone +49 763582795-0. Or send an email to info@buerkle.de.Bürkle GmbH - your partner for all questions about manual sampling.www.buerkle.de | info@buerkle.de | Hotline +49 (0) 76 35 8 27 95-0

Overview on sampling equipmentLiquids, normalLiquids, aggressiveLiquids, fl ammableViscous substances/mudsIceBulk goods, powdersSoil samplingTransport of samplesPharmaSterilAccessoriesProductPageZone sampler 70 x xAll-layer sampler 71 x xEasySampler 73 x xSpiralus zone sampler 73 xAll-layer drill 74 xSchürfstecher 75 x xScratcher 75 x xPowderProof ® 76 x xSiloDrill 78 xSiloPicker 80 xNovartos 81 x xMicroSampler 82 x xPharmaPicker 83 x xPharmaSpoon 84 x xStickProof 84 x xMilky 85 xTubus 85 xQuickPicker 86 x xclose-it control-seal 88 x x xclose-it food 90 x x x x xclose-it tape/food 91 x x x x xseal-it 93 x xsafe-it, secure-it 94 x xSampleSafe seal 95 x xValve lance 96 xPigment lance 96 x xQualiRod 97 xSpatula 98 x x x xMini ViscoSampler 99 x xStainless steel scoop 99 x x x x x xViscoSampler 100 xLiquiSampler 101 x xDip Sampler 102 xDisposable plunging siphon 103 x xScoop made of PTFE 103 x x xChemistry scoop 104 x x xLiquid-sampler 105 xTeleScoop 106 xLiquids, normalLiquids, aggressiveLiquids, fl ammableViscous substances/mudsIceBulk goods, powdersSoil samplingTransport of samplesPharmaSterilAccessoriesProductPageStainless steel beaker 107 x x xChemoSampler 108 x xMiniSampler 110 x xProfiSampler 112 x xLiqui zone sampler 114 x xUniSampler 115 xUniSampler “Ex” 115 x xVampire 117 x xDipping bottle 118 x xImmersion cylinder 119 x xDipping bottle Ex 119 x xImmersion cylinder Mini 120 x xDipping vessel 120 x xAquaSampler 121 x xTarget immersion cylinder 121 xDisposable Disposampler 123 x x x x x xDispoPipette 124 xPowderDispo 125 x x xSteriPlast scoops 126 x x xSteriPlast sample spoons 127 x x x x xSteriPlast spatula 127 x x xSteriBag 128 x x x x x x x xSteriBag StandUp 129 x x x x x x x xSteriPlast sampling tube 130 x x xSteriPlast syringe 130 x x x xEasyScoop 132 xScoop V2A (304) 132 x x xFoodScoop 133 x xPharmaScoop 133 x x xScrapers 136 x xScoops made of PP 136 x xBeefsteaker 138 xIceSampler 138 x xIce Drill 139 x xGeoSampler 140 xPürkhauer 140 xMole 141 xSampling containers 143 x x xSnowPack dry ice machines 245 x67

Repro sample divider | high-precision sample divider1. representative all-layer samples are taken with a suitable sampler.2. the sample quantity, which is usually far too large, is reduced to apractical sample size while precisely retaining the original composition.The Repro high precision sample divider meets these demandsfor the first time, thereby setting a new standard worldwide. The Repro’spatented vibration system allows reproducible sample divisions< 1 g with the highest degree of accuracy.Speed of rotation 100 rpmAccuracy of rotation 0.1 mmFunnel volume 110 mlSample tubes max. 30 mm Ø, 73 mm heightWhat use is the high precision of modern analytical systems in thePPB range, if sampling and sample division are not carried out withthe same degree of accuracy?Inadequate sampling and sample division result in unsatisfactoryand even incorrect analyses. These are worthless, or unnecessarilyexpensive because a wrong analysis can only produce incorrect resultsfrom which any conclusions obtained are “paid for dearly”.Reliable information about the properties of particle systems involvingpowders are only possible ifWhat is the difference between the Repro and conventionalsample dividers? In the Repro, it is not just the feed channel thatvibrates, but the complete distributor head. In this way, samples andparticularly poorly flowing substances such as lactose are transportedbetter in the vibrating distributor head. As in all great inventions,this is a small but crucial advantage, which is why this principle hasbeen patented! This new technique has decisive advantages if small,very small or toxic samples have to be divided and/or the highestdegree of accuracy is required for the sample division which mustalso be reproducible. This is why our sample divider is called Repro!Customer-specific sample containers. The Repro conforms toyour wishes. You can still use your usual sample tubes of all shapesand sizes (max. Ø 30 mm, height 73 mm). The sample containers aresimply inserted in the quick-action clamps of the distributor head.Sample division in a fume cupboard. The sample divider andcontrol unit are separate, which makes possible a sample divisionin a fume cupboard, e.g. with toxic substances.Cleaning function/residue removal ensures residue-free emptyingof the feed channel and the distributor head and guaranteesthat the whole of the original sample amount is fed through thesample divider. Nothing is retained - which is the only way of ensuringthat all of the original sample is contained in all the part-samples.68www.buerkle.de | info@buerkle.de | Hotline +49 (0) 76 35 8 27 95-0

Vibration steplessly adjustable. The strength of vibrationof the feed channel and distributor head canbe set steplessly between 0 % and 100 %. Thismeans that the material flow, depending on the flowbehaviour of the sample, can be controlled during thewhole division process.Laser diffraction. A typical field of application forthe new Repro has opened up in particle size analysisby laser diffraction spectroscopy. Sample amounts of< 0.1 g are used for analyses in the laboratory. TheRepro vastly improves the reproducibility and meaningfulnessof the results.Repro defines a new technological standard andshould always be used wherever the best possible analyticalresults are required.Only when all the links in the sampling chain, sampledivision and analysis are of the same strength will theresults and the conclusions drawn from them lead tosuccess.Easy handling. The operation and handling of thedevice is simple. The sample tubes are easily andquickly inserted in the self-locking holders and sampledivision can start immediately. Operation takesplace via a membrane-protected keyboard.High quality materials. All parts coming into contactwith the sample are made of stainless steel andaluminium equipped with an abrasion-resistant nonstickcoating for ideal sample transport. The housingis made of electro-polished stainless steel.Summary. Samples divided with the high-performancesample divider Repro are characterised by a significantlylower variation between all part-samples.As a result of the vibration of all device componentstransporting samples, the sample is distributed anddivided considerably more evenly and therefore moreexact than was previously possible. The cleaning functionguarantees complete sample removal, the sampleis divided down to the last particle. In this way, theRepro sample dividerPrice €Item no.8614.45 5500-1000 N2AccessoriesDescription Price € Item no.Predivider for Repro 482.30 5500-0200 N2Sampling tubes with lid, 5 ml 2.53 5500-0915 N2Sampling tubes with lid, 10 ml 2.53 5500-0916 N269

Zone samplers | for all kinds of bulk goodsBürkle zone samplers are used for taking samples ofbulk goods of any kind.The big advantage of zone samplers is that all-layersamples can be collected from all layers of the container.Various bulk goods can be collected with the lances,from the finest powder to large grains such as corn ornuts.The zone samplers are available in four lengths. 55cm (especially suitable for sacks), 85 cm long (especiallyfor barrels, tubs, mixed containers) and 150 cmas well as 250 cm for big bags, silos, tanks.Safe and reliable sampling is made even easier withuseful special accessories such as sealing sleeves,Quali-Paper, cleaning brushes, emptying devices andclose-it control seals.The zone samplers are available in different modelsfor different sampling tasks.Smallest possible gap between the inner and theouter tubeEasy cleaning, removable tipColour coding (Multi and Uno sampler)Ultra-pure materialsExcellent processing, robust modelColour coding: Identification toprevent mixing up multi samplersand single samplers1 2 31. Multi sampler (closed chambers);2. All layer sampler (open inner tube);3. Uno sampler (one closed chamber).70www.buerkle.de | info@buerkle.de | Hotline +49 (0) 76 35 8 27 95-0

Zone samplers | for all kinds of bulk goodsAll-layer sampler, with open inner tube, no separate chambers, andlarge sampling volume. For all-layer samples through all the layersof the sample. Aluminium or V4A (1.4404) 25 mm ØCorresponds to ISTA standard for seed lengths of 10 mm(wheat, oats) and 5 mm (flax, vetches).Multi sampler with several closed chambers, for multi point samplingfrom several predetermined sampling depths. Aluminium anodised, V4A (1.4404) or V4A/PTFE Version made of V4A/PTFE with low weight due to PTFE samplechambers. With colour coding system 25 mm ØUno sampler made of stainless steel V4A/PTFE with a closed samplechamber for point sampling from a predetermined sampling depth. Outer tube stainless steel V4A (1.4404), sample chambers madeof PTFE With colour coding system 25 mm Øclose-it seals openings. See page 88.All-layer-samplerMaterial Total Insertion No. of Chamber Price € Item no.length cm depth mm openings volume mlaluminium 55 430 3 70 147.35 5317-2055 N4aluminium 85 710 3 130 160.05 5317-2085 N4aluminium 150 1355 5 260 208.40 5317-2150 N4V4A 55 430 3 70 489.15 5316-2055 N4V4A 85 710 3 130 564.00 5316-2085 N4V4A 150 1355 5 260 679.00 5316-2150 N4Multi samplerMaterialTotallength cmInsertiondepth mmNumber ofcollectionchambersChambervolume mlPrice €Item no.aluminium 55 430 3 14 163.55 5317-1058 N4aluminium 85 710 3 17 181.85 5317-1085 N4aluminium 150 1355 5 17 234.80 5317-1150 N4V4A 55 430 3 14 534.00 5316-3055 N4V4A 85 710 3 17 572.00 5316-3085 N4V4A 150 1355 5 17 723.85 5316-3150 N4V4A/PTFE 55 430 3 14 347.65 5316-0055 N4V4A/PTFE 85 710 3 17 390.15 5316-0085 N4V4A/PTFE 150 1355 5 17 569.75 5316-0150 N4Uno samplerMaterialTotallength cmInsertiondepth mmNumber ofcollectionchambersChambervolume mlPrice €Item no.V4A/PTFE 55 430 1 17 354.50 5316-1055 N4V4A/PTFE 85 710 1 17 397.10 5316-1085 N4V4A/PTFE 150 1355 1 17 581.20 5316-1150 N4V4A 150 1355 1 17 581.20 5316-4150 N4Use1. Turn the handle, close the chambers.2. Insert the sampler to the required depth.3. Open the chambers, sample flows into the chamber.4. Close the chambers.5. Pull out the sampler.6. Close the insertion opening with the close-it control seal.7. Empty the chambers onto Quali-Paper or with the emptying device.71

Zone samplers | for all kinds of bulk goodsJumbo sampler with a tube diameter of 50mm, ideal for coarse grains and largerquantities.With an open inner tube and large samplingvolume, for all-layer samples throughall layers of the sample or with samplechambers separated by PTFE separators formulti point sampling from several predeterminedsampling depths. Aluminium or aluminium/PTFE 50 mm ØJumbo samplerModelTotal lengthcmMaterialInsertiondepth mmChambervolumemlPrice €Item no.All layer - open inner tube 85 aluminium 710 3 880 364.95 5319-1085 N4All layer - open inner tube 150 aluminium 1355 5 1700 516.70 5319-1150 N4All layer - open inner tube 250 aluminium 2355 7 2900 583.60 5319-1250 N4Multi - closed chambers 85 aluminium/PTFE 710 3 390 564.00 5319-2085 N4Multi - closed chambers 150 aluminium/PTFE 1355 5 650 662.95 5319-2150 N4Multi - closed chambers 250 aluminium/PTFE 2355 7 910 791.75 5319-2250 N4Accessories for zone samplersEmptying device Zone sampler sealing sleevesQuali-Paper for zone sampler Cleaning brushesEmptying deviceModel Material Lengthcm72Price €No. of openingsQuantityscalefromScaleprice €Item no.device with 3 funnels V2A 100 286.60 5 262.35 5317-0030 N4emptying funnel separate V2A 44.70 3 40.50 5317-0033 N4Sealing sleevesDia. mm Pieces per Price € Quantity scale Scale price € Item no.packfrom25 3 21.65 10 19.45 5317-0011 N450 3 28.20 10 25.45 5317-0010 N4Quali-PaperL x W cm Price € Pieces per pack Quantity scale from Scale price € Item no.100 x 23 27.95 50 10 25.55 5317-0001 N4Cleaning brushesDia. mm Length cm Material Price € Quantity scale from Scale price € Item no.25 40 PVC/stainless steel 35.60 10 33.70 5304-0040 N425 60 PVC/stainless steel 35.60 10 33.70 5304-0060 N425 80 PVC/stainless steel 35.60 10 33.70 5304-0080 N425 100 PVC/stainless steel 35.60 10 33.70 5304-0100 N450 100 PVC/stainless steel 39.00 5 35.15 5304-5100 N450 300 PVC/stainless steel 79.45 5 71.60 5304-5300 N4www.buerkle.de | info@buerkle.de | Hotline +49 (0) 76 35 8 27 95-0

Zone sampler SpiralusEasySampler | easy to emptyRepresentative sample of thecontainer layers.Aluminium, anodised38 mm ØLow weightStainless steel V4A (1.4404)For sample opening from 52mm ØLength of the sample chamber500 mmGuarantees precise zone sampling through all layers of the sample.The spiral arrangement of the sampling slits means that these areopened one after the other from bottom to top. In this way the lowestopening is filled first and then those above it in sequence untilthe complete Spiralus has been filled.The shape of the sampling slits prevents seeds from being cut up.The Spiralus provides an excellent all-layer sample.ApplicationsSpiralus is particularly suitable for sampling coarse-grained bulkgoods, seeds and pellets at locations such as soil heaps, warehouses,trucks, railway goods wagons, etc.Zone sampler SpiralusTotal length No. of openingsWeight g Chamber Price € Item no.cmvolume ml145 8 1400 770 369.55 5318-0145 N4200 8 2000 1100 496.15 5318-0200 N4AccessoriesDescription Price € Item no.Cleaning brushes 50 mm dia., length 1000 mm 39.00 5304-5100 N4It is possible to take multiple samples from bulk goods with thissampler quickly and easily.Emptying has been greatly simplified and in this model takes placevia the tip. The advantage: The sample can be emptied directly intothe sample container without having to disassemble the EasySampler,in order to obtain a mixed sample for instance.The bulk material must be free-flowing or self-flowing.EasySampler has been developed in cooperation with an internationalchemical concern based in Ludwigshafen, Germany.EasySamplerTube Ø mm Total length cm Volume ml Price € Item no.32 104,5 200 450.05 5360-1000 N273

All-layer drillFlorian Bippus, Sales Export:“ If you’re stuck and can’tget any further,sometimes you need anew approach.”The all-layer drill is a special zone collector specifically designed for heavily compacted substances.Often it is very difficult or impossible with conventional zone collectors to penetratemedia of this type and take a sample extending through all layers. By contrast, the drillingblades of the all-layer drill burrow easily and quickly to the required depth without expendingany great force. This makes it easy to take samples of media, even those with high density,and every type of highly compacted powders and granulates.The all-layer drill thus allows you to take a representative sample through all the layers, evenwith greatly compressed media.It is ideal for larger containers, mixed containers, big bags, etc. in the building materials,chemical, pharmaceutical, food and luxury items industries.Stainless steel V4A (1.4404)25-mm diameterUse1. The all-shift drill is screwed manually into the bulk material2. The chambers are opened at the desired sample depth and the sample material flows in3. Close the chambers4. Remove or unscrew the all-shift drill5. Empty the sample through the open inner tubeAll-layer drillMaterial Total length cm Insertion depth mm Number of collection Price €Item no.chambersV4A 150 1355 5 1018.90 5310-0150 N474www.buerkle.de | info@buerkle.de | Hotline +49 (0) 76 35 8 27 95-0

All-layer-scratcherScratcher | for non-pourable substancesThe scratcher is a special sampler for powdersand granules that do not flow freely.The sample is transferred to the closable innertube using a scraper.Sliding PTFE separators are used to divide theinner tube into different zones. The separatorsalso prevent the sample from being mixed.For caked bulked goodsZones can be varied due to moveable PTFEseparators.Made of stainless steel V4A (1.4404) andPTFEThe scratcher has particularly been designed for sampling cohesive,caked and not free-flowing substances.Stainless steel V4A (1.4404)Electro-polishedTotal length 1000 mmUse1. Insert the closed lance into the sample.2. Open the inner tube by turning the sample chamber when at therequired depth.3. Turn the scratcher by 360° in the sample, the scraper directs thecaked material into the sample chamber.4. Close the sample chamber.All-layer-scratcherDia. mm Length mm Price € Item no.25 1000 332.60 5351-1000 N2AccessoriesDescription Price € Item no.Cleaning brushes 25 mm dia., length 35.60 5304-0100 N4100 cmScratcherChamber volume Flute length mm Outer dia. with Price €Item no.mlscraper mm5 22 25 818.80 5347-0005 N210 45 25 857.60 5347-0010 N225 110 25 898.55 5347-0025 N275

PowderProof ® | mobile powder samplingQuality assurance starts with the inspection of incominggoods! An all-layer sample of bulk goods is nolonger a problem with PowderProof ® , the sampler forpowders and granules.PowderProof is the practically proven professional solutionfor mobile sampling of powders and granules.Different lances and augers can be attached to therobust drive unit and swapped without any problems.This modular design makes PowderProof a versatileinstrument for sampling powders and granules fromdrums, barrels, bags or sacks.Safe and reliable sampling is made even easier withuseful accessories such as basket-enclosed bottles,sample bags and close-it control seals.PowderProof with lance for horizontal use, such assampling from sacks, with lance for vertical use, forsampling from open containers such as barrels, drumsor bags.76www.buerkle.de | info@buerkle.de | Hotline +49 (0) 76 35 8 27 95-0

PowderProof ® | mobile powder samplingMany usesStainless steel V4A (1.4404)Incl. motor 12 V, two re-chargeable batteries, fast charger, clip for holding the bag and cleaning brushAdditional augers available as accessoryUse1. The lance is inserted into the sack/container with the spiral screw rotating.2. The powder or granules are immediately transported through the lance and filled directly into a samplebag or bottle at the lance outlet.3. Any excess sample remaining in the lance is returned to the sack by reversing the spiral screw directionPowderProof for horizontal …… and vertical usePowderProofModel Lance Length cm Price € Item no.for powders up to 2mm dia. horizontal 30 1522.50 5302-0302 N2for powders up to 2mm dia. vertical 60 1637.50 5302-0602 N2for powders up to 2mm dia. vertical 90 1714.70 5302-0902 N2for powders up to 2mm dia. vertical 120 1901.15 5302-1202 N2for granules from 2 up to 4mm dia. horizontal 30 1522.50 5302-0301 N2for granules from 2 up to 4mm dia. vertical 60 1637.50 5302-0601 N2for granules from 2 up to 4mm dia. vertical 90 1714.70 5302-0901 N2for granules from 2 up to 4mm dia. vertical 120 1901.15 5302-1201 N2AccessoriesDescription Price € Item no.Spiral screw for PowderProof for powders up to 2mm dia., 30 cm 223.35 5302-0312 N2Spiral screw for PowderProof for powders up to 2mm dia., 60 cm 242.90 5302-0612 N2Spiral screw for PowderProof for powders up to 2mm dia., 90 cm 267.05 5302-0912 N2Spiral screw for PowderProof for powders up to 2mm dia., 120 cm 287.75 5302-1212 N2Spiral screw for PowderProof for granules from 2 up to 4mm dia., 30 cm 223.35 5302-0311 N2Spiral screw for PowderProof for granules from 2 up to 4mm dia., 60 cm 242.90 5302-0611 N2Spiral screw for PowderProof for granules from 2 up to 4mm dia., 90 cm 267.05 5302-0911 N2Spiral screw for PowderProof for granules from 2 up to 4mm dia., 120 cm 287.75 5302-1211 N2Bag clip for PowderProof 14.20 0006-6259 N4Transport case L x W 121 x 22,5 cm 88.80 3600-2120 N4Sampling bottle LDPE 500 ml 2.60 0318-0500 N3Basket for sample bottles 70.25 5302-2050 N2Packaging bags with closure, 170x120 mm, 400 ml, 100 pieces 8.60 2348-0005 N377

SiloDrill | for sampling from silo vehiclesUtilitymodelDrill tip with drilling bladesfor easy boring78www.buerkle.de | info@buerkle.de | Hotline +49 (0) 76 35 8 27 95-0

SiloDrill | for sampling from silo vehiclesIf bulk goods are transported over long distances (in trucks, railwaygoods wagons), separation may occur.Taking the sample just from the surface therefore leads to thewrong result.Representative samples from all layers of the silo can be taken withthe SiloDrill. The SiloDrill fits through all standard openings with itsdiameter of 90 mm.Of stainless steel V2A (1.4301) or aluminiumStandard length 150 cm, extendable in increments of 100 cm,max. 350 cmSprung inner tube prevents jamming of coarse grainsScraper edge for cohesive substancesSturdy, removable T-handleDrill tip with drilling blades for easy boringEasy removal of the sample chamber, simple cleaningSiloDrillMaterialTotallength cmSpiralscrew dia.mmChamberdia. mmVolume ml Price € Item no.aluminium 150 90 40 400 426.30 5301-1000 N4V2A 150 90 40 400 2390.45 5301-2000 N4AccessoriesDescription Price € Item no.SiloDrill extension V2A, 100 cm 87.60 5301-0500 N4Transport case L x W 121 x 22,5 cm 88.80 3600-2120 N479

Silo sampler SiloPickerUnit-Dose-SamplingDuring powder separationchecks and purity validations ofpowders, liquids and semi-solidsubstances, special procedures(unit-dose-sampling) must beemployed to achieve the desiredresults.Special sampling methods,which are required especially inthe pharmaceutical industry inconformance with FDA and GMPspecifications, require samplerswith special features.The SiloPicker is ideal for taking bulk goods samples from silos. Using the extension rods, samples canbe taken from depths down to 3.5 m. The insertion depth depends on the density of the bulk goods.Stainless steel V4A (1.4404)Use1. Insert SiloPicker into the bulk goods. When this is done, the closure sleeve automatically closes thecollection container.2. When the sampling depth has been reached, the closure sleeve is opened by gently pulling back theSiloPicker, the sampling container is filled.3. Pull out the SiloPicker and empty it.Silo sampler SiloPickerChamber volume ml Length cm Outer dia. mm Price € Item no.100 130 50 329.20 5340-1100 N4AccessoriesDescription Price € Item no.SiloPicker extension 50 cm 45.20 5380-0508 N4SiloPicker extension 100 cm 52.55 5380-1008 N4SiloPicker handle 53.35 0006-8112 N4SiloPicker sample container 222.20 5340-0100 N4Transport case L x W 121 x 22,5 cm 88.80 3600-2120 N4 High degree of preciseness Groove-free surfaces, electropolishedif possible AISI 316 stainless steel orPTFE materials Sterilisable Easy and perfect cleaningMany Bürkle Samplers fulfillthese demands, have been testedin actual practice, and aredistinguished by especially sturdyand precise machining.Novartos is a pharma zonesampler for unit-dose sampling: For various sampling depthswith simultaneous doublesample (Duo-Sampler). Precise volume calibrationwith 40 exchangeable sampleinserts with volumes from0.1 ml to 4.0 ml, in incrementsof 0.1 ml.80www.buerkle.de | info@buerkle.de | Hotline +49 (0) 76 35 8 27 95-0

Novartos | pharma zone sampler according to FDA guidelines for unit-dose samplingThe Novartos Multi has 14sample chambers for up toseven sample zones for anall-layer sample.Novartos Uno sampler withtwo sample chambers, for onesample zone.Novartos the Pharma zone sampler accordingto FDA Guidelines Unit-Dose-Sampling.It is now possible to withdraw a doublesamplewithout inserting the lance repeatedlyinto the bulk material. Mixing is mainlyprevented in this way.Novartos MultiNovartos was developed in cooperationwith a globally-operatingpharmaceuticals and chemicals corporationlocated in Basel, Switzerland. The sample inserts fitprecisely and can easily bereplaced. Inserts are available involumes from 0 to 4.0 ml The insertion depths caneasily be read from thelaser-engraved depth scale Stainless steel V4A(1.4404 / 1.4571) Groove-free and handpolished 25 mm ØModel Length mm Price € Item no.without 1000 1439.55 5358-1000 N4insertsAccessoriesDescription Price € Item no.Transport case L x W 121 x 88.80 3600-2120 N422,5 cmNovartos UnoNovartos double-sampleComputer optimized insertsPlease order insertsseparately!Model Length mm Price € Item no.without inserts 600 977.10 5358-0600 N4without inserts 1000 1002.40 5358-1001 N4without inserts 1400 1002.40 5358-1400 N4AccessoriesDescription Price € Item no.Transport case L x W 121 x 22,5 cm 88.80 3600-2120 N4One significant advantage of Novartos is theeasy cleaning.Complete filling and emptying of samplechambers has been improved substantiallyusing computer-optimised geometry. Thereare no crevices or dead spaces where samplingresidues can collect.- Novartos Uno for targeted sampling- Novartos Multi enables all-layer samplesAccessoriesDescription Price € Item no.Inserts for Novartos Multi 77.20 5358-0000 N4capacity 0,0 mlInserts for Novartos Multi, 89.60 5358-0005 N4capacity 0,5 mlInserts for Novartos Multi, 89.60 5358-0010 N4capacity 1 mlInserts for Novartos Multi 89.60 5358-0015 N4capacity 1,5 mlInserts for Novartos Multi, 89.60 5358-0020 N4capacity 2 mlInserts for Novartos Uno, 77.20 5358-0100 N4capacity 0 mlInserts for Novartos Uno, 89.60 5358-0105 N4capacity 0,5 mlInserts for Novartos Uno, 89.60 5358-0110 N4capacity 1 mlInserts for Novartos Uno, 89.60 5358-0120 N4capacity 2 mlInserts for Novartos Uno, 89.60 5358-0130 N4capacity 3 mlInserts for Novartos Uno,capacity 4 ml89.60 5358-0140 N481

MicroSampler | useful for taking small samples, sterilisableThe MicroSampler has especially been designed for the sampling ofsmall quantities of powder.Volumes of 0.2 ml, 0.5 ml, 1.0 ml, 2.0 ml, 5.0 ml and 10 ml can besampled easily, quickly and cleanly from different sampling depthsfrom sacks or containers.The tips of the MicroSampler are interchangeable. This means thattips with different volumes can be used. Point sampling Various lengths and volumes are available Tip can be removed, easy cleaning Stainless steel V4A (1.4404) Sterilisable Additional tips are available in different sizesPlease order lance and head separately!Use1. Insert MicroSampler into powder.2. At the predetermined point, open thevolume tip by pressing the button,the sample flows in.3. Close the volume tip, the sample iscollected.4. Pull back the lance, open the volumetip again, empty the sample.82MicroSamplerTube Ø mm Length cm Model Price € Item no.12 55 without head 199.05 5307-1055 N412 85 without head 221.00 5307-1085 N412 120 without head 240.55 5307-1120 N425 55 without head 258.95 5307-2055 N425 85 without head 279.75 5307-2085 N425 120 without head 298.10 5307-2120 N4AccessoriesDescription Price € Item no.MicroSampler heads fi ts tube with 12 mm dia., capacity 0,2 ml 59.90 5307-0102 N4MicroSampler heads fi ts tube with 12 mm dia., capacity 0,5 ml 59.90 5307-0105 N4MicroSampler heads fi ts tube with 12 mm dia., capacity 1ml 59.90 5307-0110 N4MicroSampler heads fi ts tube with 25 mm dia., capacity 2 ml 81.80 5307-0202 N4MicroSampler heads fi ts tube with 25 mm dia., capacity 5 ml 81.80 5307-0205 N4MicroSampler heads fi ts tube with 25 mm dia., capacity 10 ml 81.80 5307-0210 N4www.buerkle.de | info@buerkle.de | Hotline +49 (0) 76 35 8 27 95-0

PharmaPicker | for sampling very small quantitiesFor sampling very small quantities of highly potent, expensive or activepowders for analysis. The smallest sample quantities from 0.1ml to 2.5 ml can be collected with the PharmaPicker. By simply exchangingthe volume tip in the collection cylinder for 0.1 - 1.2 ml or1.25 - 2.5 ml, the sampling volume is modified.The PharmaPicker has a length of 60 cm and can be extended repeatedlyby 50 cm or 100 cm, maximum length 3.50 m. The PharmaPickeris available separately or as PharmaPicker Case in a handytransport box.PharmaPicker Case consisting of: Collection cylinders in both sizes,extension rod 50 cm and 100 cm, handle, volume tips 0.4 ml, 0.6 ml,0.8 ml, 1.0 ml, 1.2 ml, 1.4 ml, 1.8 ml, 2.0 ml, 2.3 ml and 2.5 ml (alternativesample volumes on request), transport box.Use1. Insert the required volume tip into the collection cylinder.2. Insert the PharmaPicker, the disk sleeve closes the collectioncylinder automatically.3. The disk sleeve opens the collection cylinder at the requiredpoint, and the desired sample is collected.4. Withdraw the PharmaPicker completely.5. Empty the sample directly from the collection cylinder into theanalysis container.Stainless steel V4Aelectro-polishedPlease order lance and head separately!PharmaPickerModel Price € Item no.with collection cylinder for 0.10 - 1.20 ml, without head 309.65 5346-1000 N2with collection cylinder for 1.25 - 2.50 ml, without head 309.65 5346-2000 N2Case, completely 1509.90 5346-0010 N2AccessoriesDescription Price € Item no.Volume heads for PharmaPicker, capacity 0,10 ml 61.15 5346-1010 N2Volume heads for PharmaPicker, capacity 0,20 ml 61.15 5346-1020 N2Volume heads for PharmaPicker, capacity 0,60 ml 61.15 5346-1060 N2Volume heads for PharmaPicker, capacity 1,00 ml 61.15 5346-1100 N2Volume heads for PharmaPicker, capacity 2,00 ml 61.15 5346-2200 N2Volume heads for PharmaPicker, capacity 2,50 ml 61.15 5346-2250 N2AccessoriesDescription Price € Item no.Extension rod PharmaPicker 500 mm 45.20 5380-0506 N4Extension rod PharmaPicker 1000 mm 52.55 5380-1006 N4Collection cylinder for 0,10 - 1,20 ml, without volume head 200.30 5346-1001 N2Collection cylinder for 1,25 - 2,50, without volume head 191.10 5346-2001 N2Handle PharmaPicker 53.35 0006-8113 N383

PharmaSpoon | for ultrapure samplingStickProofPharmaSpoon84PharmaSpoon for taking samples of powdery substances,intermediate products and material in thepharmaceutical industry. Special materials with excellentsurface qualities must be used for this toprevent cross-contamination. Our PharmaSpoonfulfils these requirements. Made of stainless steelV4A (1.4404), surface highly polished by hand (notelectro-polished!). The excellent surface propertiesof the PharmaSpoon provide significant advantages.Possible residues are even visible in the tracesector (µg sector)The surface is easy to cleanThe PharmaSpoon is also suitable for sterilesamplingThe PharmaSpoon was developed by an internationallyknown pharmaceutical company inBasel, Switzerland, and its usefulness hasbeen confirmed in actual practice.Total length mm Price € Quantity scale Scale price € Item no.from650 432.05 5 345.60 5324-0001 N2Sampler for powder in the pharma area, made of stainless steelV4A, material 1.4404. The especially slender tip can be insertedeasily and deeply in order to take the sample. The conical inlet ofthe tip allows the collection of either very small or larger quantities.StickProof is constructed in one piece without edges, grooves orcrevices for perfect and easy cleaning. The sample can be filled directlyinto the sampling bag from the outlet end. Fasten the bagwith a sturdy clamp.Corresponds to ISTA standard for seed lengths of 10 mm(wheat, oats) and 5 mm (flax, vetches).Surface electro-polishedVarious sample quantities up to approx. 50 mlIncl. clamp and 100 PE sampling bags 120 x 170 mmStickProofLength mm Dia. mm Price € Item no. Quantity scale Scalefrom price €410 25 258.95 5338-0410 5 233.70 N41100 25 312.00 5338-1100 5 280.90 N4AccessoriesDescription Price € Item no.StickProof clamp 13.30 5338-0001 N2Packaging bags with closure, 170x120 mm, 400 ml, 100 pieces 8.60 2348-0005 N3close-it control seals see page 88www.buerkle.de | info@buerkle.de | Hotline +49 (0) 76 35 8 27 95-0

Sampling lance Milky | acc. to EN ISO 707Sampler TubusSampler for pourable bulk goods up to approx. 1 cm in diameter.This makes it possible, for example, to remove hazel nuts, blends oftea, grain or similar items from large sacks.Universal powder and granules sampler made of stainless steel V4A.Developed initially for milk powder samples, conforms to standardsof DIN and IDF (International Dairy Federation).The collector is inserted into bags or casks and the sample is removedusing a semi-circular profile lance.Also for coarse-grained bulk goodsMade of stainless steel V4A (1.4404)Special geometry of the tipCorresponds to ISTA standard for seed lengths of 10 mm(wheat, oats) and 5 mm (flax, vetches). Stainless steel V4A (1.4404) Insertion depth 385 mm Total length 480 mm Outer diameter approx.28 mmclose-it seals and close-it food lock sealsensure non-leak closure of the insertionpoint in bags and BigBags. See page 88.Sampling lance MilkyVolume ml Price € Quantity scale Scale price € Item no.from150 143.95 5 127.80 5321-0300 N4Use1. Insert Tubus into a sack to the desired sampling depth, whilekeeping the collection tube closed using your hand.2. When you remove your hand, the sample flows directly throughthe open tube into the container or sampling bag beneath it.Sampler TubusLength cm Dia. mm Price € Quantity scale Scale price € Item no.from40 40 91.05 10 87.45 5382-0040 N480 40 118.60 10 108.25 5382-0080 N4AccessoriesDescriptionclose-it control seals see page 8885

QuickPicker | collects samples quickly and channels them directly into the sampling bottleThe core sampler is particularly suitable in the event that bulk goods are taken directlyfrom sacks or bags and have to be filled into the original sampling bottle directly.QuickPicker is uncomplicated in its use and cleaning. No undercuts or edgesmean no sample residues which could falsify subsequent samples. It istherefore ideal for quality control.QuickPicker is delivered complete with two 250 ml PE sample bottles and with acleaning brush.86www.buerkle.de | info@buerkle.de | Hotline +49 (0) 76 35 8 27 95-0

QuickPicker | collects samples quickly and channels them directly into the sampling bottleInsertion depth 30 cm, diameter 25 mmMade of stainless steel (1.4404) approved for use with foodstuffs or PP transparent foraggressive chemicals, scratchproof, sterilisable, cost-effectiveRemovable tip, easy cleaningAdditional sampling bottles made of PE or PP available as accessoriesCorresponds to ISTA standard forseed lengths of 10 mm (wheat,oats) and 5 mm (flax, wetches).QuickPicker V4A in useclose-it seals and close-it food lock sealsensure non-leak closure of the insertionpoint in bags and BigBags.See page 88.QuickPickerMaterial Insertion depth mm Total length cm Volume ml Price € Quantity scale from Scale price € Item no.V4A 300 50 75 192.30 5 173.90 5322-1300 N4PP, transparent 300 50 75 120.95 5 109.45 5322-0300 N4AccessoriesDescription Price € Item no.Sampling bottle LDPE, 250 ml 1.60 0318-0250 N3Sampling bottle PP, 250 ml 1.78 0319-0250 N3Transport case for QuickPicker 24.05 3600-3000 N3close-it control seals see page 8887

close-it control seal | essential for samplingclose-it – standard size 95 x 95 mmclose-it Maxi - 150 x 150 mm, for larger holes orlonger tears in containersThe labels are supplied in handy rollsThe cross perforations allow each label to beseparated from the roll individually88www.buerkle.de | info@buerkle.de | Hotline +49 (0) 76 35 8 27 95-0

close-it control seal | essential for samplingTaking samples from sacks, boxes,bags, etc. with samplinglances is a common and timeprovenpractice. This producesholes through which easily flowingbulk goods could escapefrom the container. With theclose-it seal, this can be preventedin an uncomplicatedmanner.to most commercial containers,even to surfaces coated withfine powder, slightly moist oreven frozen surfaces whereconventional labels or adhesivetape will not stick.close-it has been especially developedfor this purpose. The labelhas a sandwich-type structure(aluminium/ paper) andseals the container hermetically(vapour barrier). This virtuallyprevents hygroscopic powdersfrom clumping together. The labelis not just used to provide ahermetic seal. It is also used forproviding quality control information(sampling date, releaseyes/no, name of tester, etc.).The labels are available in differentcolours. With printing inred, blue, green, yellow, black,neutral, without printing inwhite.close-it can be written on withball-point pen, pencil or felt-tipmarker.The rear of the label is coatedwith a powerful adhesive. Thismeans that close-it sticks firmlyControl seal close-it 95x95Colour Model W x H mm Pieces per roll Price € Quantity scale Scale price € Item no.fromred printed 95 x 95 500 57.05 10 51.00 5303-0012 N4yellow printed 95 x 95 500 57.05 10 51.00 5303-0014 N4blue printed 95 x 95 500 57.05 10 51.00 5303-0015 N4green printed 95 x 95 500 57.05 10 51.00 5303-0016 N4black printed 95 x 95 500 57.05 10 51.00 5303-0011 N4white unprinted 95 x 95 500 57.05 10 51.00 5303-0002 N4AccessoriesDescription Price € Item no.close-it dispenser for labels with 95 x 95 mm 77.20 5303-9000 N4Control seal close-it maxi 150x150Colour Model W x H mm Pieces per roll Price € Quantity scale Scale price € Item no.fromred printed 150 x 150 250 79.95 10 74.55 5303-1012 N4yellow printed 150 x 150 250 79.95 10 74.55 5303-1014 N4blue printed 150 x 150 250 79.95 10 74.55 5303-1015 N4green printed 150 x 150 250 79.95 10 74.55 5303-1016 N4black printed 150 x 150 250 79.95 10 74.55 5303-1011 N4white unprinted 150 x 150 250 79.95 10 74.55 5303-1002 N4AccessoriesDescription Price € Item no.close-it dispenser for labels with 150 x 150 mm 108.25 5303-9100 N489

Control seal close-itfoodHeidi Nönninger, Sales Germany:“ Because our customersin the food andpharmaceuticalindustries alsoappreciate colourfulvariety, close-it food isnow available in allcolours and sizes.”In response to numerous requestsfrom our customers, wehave developed close-itfood, acontrol seal with an adhesiveapproved for use with foodstuffs.The strength of the adhesiveis almost as powerful asthat of the original, the close-itfrom Bürkle, proven millions oftimes. close-itfood also reliablyprevents products from leakingout after sampling.The adhesive complies with theEuropean guidelines for foodstuffs.Just like the original,close-itfood has a barrier layerof aluminium foil. This meansthat close-itfood is suitable forsampling foodstuffs, pharmaceuticals,cosmetics, food additives,even frozen goods – inshort, for all applications inwhich cleanliness is particularlyimportant.According to FDA GuidelinesParticularly suited for thefood and pharma industryControl seal close-itfood 95x95Colour Model W x H Pieces Price € Quantity Scale Item no.mm per rollscale from price €red printed 95 x 95 500 57.05 10 51.00 5303-2017 N4yellow printed 95 x 95 500 57.05 10 51.00 5303-2020 N4blue printed 95 x 95 500 57.05 10 51.00 5303-2021 N4green printed 95 x 95 500 57.05 10 51.00 5303-2022 N4black printed 95 x 95 500 57.05 10 51.00 5303-2023 N4white unprinted 95 x 95 500 57.05 10 51.00 5303-2018 N4AccessoriesDescription Price € Item no.close-it dispenser for labels with 95 x 95 mm 77.20 5303-9000 N4Control seal close-itfood Maxi 150x150Colour Model W x H mm Pieces Price € Quantity Scale Item no.per rollscale from price €red printed 150 x 150 250 79.95 10 74.55 5303-3017 N4yellow printed 150 x 150 250 79.95 10 74.55 5303-3020 N4blue printed 150 x 150 250 79.95 10 74.55 5303-3021 N4green printed 150 x 150 250 79.95 10 74.55 5303-3022 N4black printed 150 x 150 250 79.95 10 74.55 5303-3023 N4white unprinted 150 x 150 250 79.95 10 74.55 5303-3018 N4AccessoriesDescription Price € Item no.close-it dispenser for labels with 150 x 150 mm 108.25 5303-9100 N490www.buerkle.de | info@buerkle.de | Hotline +49 (0) 76 35 8 27 95-0

close-it tapeBesides the individually detachable close-it and close-itfood closurelabels, our repeatedly tested and proven control seal is now alsoavailable on a continuous roller. This helps you discover whetheryou require only a small piece, for example for closing a small hole,or for marking a specific point. Or whether you want to repair along crack or a large hole quickly, reliably and easily.With its extremely strong adhesive strength, close-it tape holds on themost diverse bases, where the glue effect of normal adhesive tapequickly reaches its maximum capacity.CustomizableDifferent designsFor larger holes or longer tears in containersFor universal use, we have kept the adhesive tape close-it tape inwhite with tear-off lines. It can be labelled with permanent ink andlocks gas-proof. Available in the classic close-it design, as well asclose-it tape food, with a food-compatible adhesive.close-it tapeWidth mm Model Length m Price € Quantity scale from Scale price € Item no.95 standard 50 57.05 10 51.00 5303-0017 N4150 standard 50 79.95 10 74.55 5303-1017 N495 food 50 57.05 10 51.00 5303-2019 N4150 food 50 79.95 10 74.55 5303-3019 N4AccessoriesDescription Price € Item no.close-it dispenser for labels with 95 x 95 mm 77.20 5303-9000 N4close-it dispenser for labels with 150 x 150 mm 108.25 5303-9100 N491

close-it | with individual customer-specific special printingCustom-made according to the customer’s specificationsThe close-it control seal has many satisfied users who use close-it as a control seal,for documentation or as an informative label.Your individual close-itWe would be happy to help you design your own close-it. Do you need finalartwork for your draft? Or would you like to use our complete graphics servicefrom draft stage through the print process? Our advertising department wouldbe happy to consider any challenge!D/HALShape and colourRound, square, rectangular or other shape? Unusual contours can also beimplemented! We would be pleased to provide you with a quote. Of course printis available in all colours, with either single or multiple colours.Finishingclose-it can be manufactured with or without carrier paper perforations. Differentnumbers of close-it labels can be supplied in a single roll.SaatgutverkehrSkontrolleQualitäts-sicherungQualitätssicherungDifferent draft variantsof close-it92www.buerkle.de | info@buerkle.de | Hotline +49 (0) 76 35 8 27 95-0

seal-it security seal | for retention samples and tamper-proof packsclose-it dispenserClear identificationvia numbers in sequenceIntegrated controllabel with the samenumber, for accompanyingdocumentsFormat 178 mm long,30 mm wideTear-off perforationfor each labelRetention samples are kept to provide a sample forcomparison at a later date. The unambiguous proofthat the retention sample is identical to the originalsample is only possible with clearly marked andsealed containers. However, sealing is frequently notpossible unless eyelets are present.seal-it provides the solution! The seal-it self-adhesivelabel sticks to all conventional containers. Thanks toits unbelievable adhesive power it cannot be removed.If a container opening is closed with seal-it, then thecontainer cannot be opened without destroying theseal-it label. seal-it is additionally provided with severalcross-perforations which immediately tear whenmanipulated like a motorcar tax disc.seal-it can be used to securely seal bottles, samplebags, sacks, specimen bags, envelopes, etc. – in principleany type of container. The aluminium foil adaptsseal-it to any container shape. The white labellingfield on seal-it can be written on with all conventionalwriting tools with, for example, contents information,sampling date, name of operator, etc.The close-it dispenser ensures safe storage and simpleremoval of the labels. The labels can be convenientlywritten on due to the marking plate.For close-it standard size 95 x 95 mm or close-itMaxi 150 x 150 mmseal-it security sealLength mm Width mm Colour Pieces per Price € Quantity Scale price € Item no.rollscale from178 30 red 500 119.00 5 114.60 5399-0003 N4close-it dispenserModel Price € Item no.for labels with 95 x 95 mm 77.20 5303-9000 N4for labels with 150 x 150 mm 108.25 5303-9100 N493

Tamper proof labels safe-it and secure-itThe safety labels safe-it and secure-it are used as originality seals and as protectionfrom manipulations of e.g. samples, retention samples, for transporting samples,sealing containers with important or dangerous chemicals in the lab as wellas sealing letters, shipments and much more.The initial opening of a package is made obvious and irrevocably visible with theseal guaranteeing originality, unauthorised opening can therefore be proven.If the safety label is removed, it divides into separate layers. A pattern that waspreviously hidden appears on the surface and is irreversible. The glue leaves a residueon the surface that cannot be removed (a so-called void label). Once the labelhas been removed, it cannot be used again. Changing the label or modifying itafterwards are therefore not possible.When the safe-it security seal has been broken, a silvercheckerboard pattern appears on both the subsurfaceand surface of the sticker itself.With checkerboard patternVisible proof of tamperingTamper proof labels safe-itW x H Pieces per Price € Quantity Scale Item no.mm rollscale from price €95 x 20 500 86.20 5 77.50 5303-5000 N4AccessoriesDescription Price € Item no.close-it dispenser for labels with 95 x 95 mm 77.20 5303-9000 N494www.buerkle.de | info@buerkle.de | Hotline +49 (0) 76 35 8 27 95-0

Tamper proof labels secure-itSampleSafe seal | secure your samplesRetained samples must be always secured against falsification and ambiguity inidentification. Bottles with sealing eyelets should therefore be secured with SampleSafeseals.The seals are made of stable polypropylene. The seals are to be uniquely identifiedwith the serial 9-digit number.Wh en the secure-it security label has been broken, abright purple stop sign pattern appears on both thesubsurface and surface of the sticker itself. A labelingfield is available for comments and notes.With labeling fieldWith stop sign patternVisible proof of tamperingTamper proof labels secure-itW x H Pieces per Price € Quantity Scale Item no.mm rollscale from price €95 x 20 500 129.85 5 116.95 5303-5010 N4AccessoriesDescription Price € Item no.close-it dispenser for labels with 95 x 95 mm 77.20 5303-9000 N4The seal ring has a diameter of 2 mm, therefore SampleSafe seals also fit throughsmall eyelets and slits. The seal tape is secured in the closure chamber by a metalinsert made of stainless spring steel. The one-way tightening mechanism offersadditional security against manipulation. It is not possible to forcibly open or manipulatethe closure of the seal without leaving behind clear traces.Clear identification via numbers in sequence100 seals (10 strips) per pack.Protection against manipulation by stainless steel safety spring.SampleSafe sealLength mm Dia. mm Colour Pieces per Price € Quantity Scale price € Item no.packscale from260 2 red 100 65.75 10 62.25 5399-2902 N295

Pigment lanceValve lancePigment lance to sample pigments, pastes and agglomerating bulkgoods.With half-open flute 50 %, for heavily sticking productsWith quarter-open flute 25 %, for lightly sticking productsStainless steel V4A (1.4404)30 mm ØUse1. Insert the lance to the required depth.2. Turn the handle, the sample is collected into the open flute.3. Pull back the lance.4. Take out the sample.Sampler for all-layer samples of viscous, paste-like, semi-liquid substances,according to DIN 51750 pt. 3 and DIN 53242 pt. 3. Differentlayers remain intact particularly with paste-like substances. Stainless steel V4A (1.4404) 32 mm Ø Optimised opening mechanism (can be completely disassembled)for easy cleaningUseFor viscous substances:1. The valve lanced is inserted all the way to the bottom, whilst being closed.2. It is opened, closed and pulled out again.For paste-like substances:1. The valve lance is inserted all the way to the bottom, whilst being open.2. It is closed and pulled out again.Pigment lanceLength mm Flute openings % Volume ml Price € Item no.300 25 145 166.90 5369-0300 N4300 50 85 181.85 5369-0310 N4600 25 312 240.55 5369-0600 N4600 50 179 261.30 5369-0610 N4900 25 480 323.50 5369-0900 N4900 50 273 350.00 5369-0910 N496Valve lanceLength mm Price € Item no.550 1089.95 5359-1600 N4800 1362.10 5359-1800 N4AccessoriesDescription Price € Item no.Transport case L x W 121 x 22,5 cm 88.80 3600-2120 N4www.buerkle.de | info@buerkle.de | Hotline +49 (0) 76 35 8 27 95-0

QualiRod conicalQualiRod cylindricalConical hand-drill, conically shaped, with sharp cutting edges and asolid handle. Ideal for cutting out samples for quality control fromsoft, paste-like substances (cheese, butter, clay, soap, wax, etc.).Stainless steel V2A (1.4301)SterilisableAccording to EN/ISO 707QualiRod conicalDrilling depth mm Price € Quantity scale Scale price € Item no.from120 67.90 5 63.50 5311-0001 N4170 78.35 5 75.15 5311-0002 N4Cylindrical hollow drill with a sharp cutting edge, can easily be driveninto paste-like and semi-solid substances. The samples cut outare subsequently removed with the appropriate push-rod ejector. Totallength 260 mm. Inner Ø 8 mm, outer Ø 10 mm.Stainless steel V2A (1.4301)SterilisableInner Ø 8 mm, outer Ø 10 mmQualiRod cylindricalDrilling depth mm Price € Quantity scale Scale price € Item no.from200 102.30 5 92.45 5311-0101 N497

SpatulaUniversal instrument for collecting, dividing and mixingpastes, creams etc.Blade made of stainless steel V2A (1.4301)Wooden handleEnvironmental protectionConsider the whole – act logically.The preservation of our environment and the responsibletreatment of our sources of raw materials is an importantaspect of Bürkle’s product and corporate philosophy.We have a clear target: to treat our resources with care andto minimize emissions.Environmental protection is a natural part of our products.Right from the start of developing a new product we alwaystake its potential effects on the environment into account.This is why we use the environmentally friendly and fully recyclableplastics polyethylene (PE) and polypropylene (PP) to the largest possible extent.These both belong to the thermoplastic group and are outstandingly suitable forbeing recycled, as they have the simplest molecular structure of all plastics. They arenon-toxic and groundwater-neutral. As they are pure hydrocarbon compounds theircombustion produces only carbon dioxide and water.When resources are involved we make all the savings we can.We have optimized our manufacturing processes to such an extent that rejects andwaste are reduced to the absolute minimum. This is done by using production methodsthat are orientated to subsequent re utilization. We have our own technical facilitiesand the know-how for closing the raw materials cycle to the largest degree possible.Otherwise they are disposed of in a proper manner.Do more with less energy.Each kilowatt-hour of electricity saved is a gain for our environment and also reducesour energy budget. Sensors in the warehouse make sure that the lights only go onwhen somebody is in that particular racking run. Process heat is not just dischargedinto the atmosphere, but into our heating plant. This again obtains heat from theground water by using heat exchangers – from our own water source.SpatulaLength mm Price € Quantity Scale price € Item no.scale from180 11.70 10 10.85 5313-0180 N4300 18.90 10 17.15 5313-0300 N498www.buerkle.de | info@buerkle.de | Hotline +49 (0) 76 35 8 27 95-0

Stainless steel scoopMini ViscoSampler | for small quantitiesIn contrast to conventional scoops, the stainless steelscoop has no openings, undercuts or crevices in whichresidues could collect. Pore-free finishing produced byhigh-quality laser welding seams.The stainless steel scoop can be flame-sterilised andcan therefore be made completely germ-free.Scoop made of stainless steel V2A (1.4301), completewith rodSterilisable by flame sterilisation or steam sterilisationSampler for viscous substances such as pastes, mud, creams, oils. The sample isdrawn in using the pump rod and directly conveyed to the sampling container.Easy cleaning for flawless sampling. Depending on the viscosity, the removablesuction tip can be fitted with suction drills of 2 mm to 6 mm.Stainless steel V4A (1.4404)SterilisableIdeal for the pharmaceutical and cosmetics industryIncl. suction tip 2 mm15 mm ØStainless steel scoopTotal length cm Capacity ml Price € Item no.115 1000 209.60 5354-1000 N4Mini ViscoSamplerLength cm Chamber volume Price €Quantity scale Scale price € Item no.mlfrom60 30 222.20 5 199.05 5341-1060 N4100 50 257.95 5 232.55 5341-1100 N4150 75 315.40 5 287.75 5341-1150 N4AccessoriesDescription Price € Item no.Suction heads for Mini ViscoSampler, suction drill 2 mm 35.45 5341-1002 N4Suction heads for Mini ViscoSampler, suction drill 4 mm 35.45 5341-1004 N4Suction heads for Mini ViscoSampler, suction drill 6 mm 35.45 5341-1006 N4Drain safety stand, see page 55 42.25 5618-1000 N499

ViscoSampler | sample collector for medium viscosity substancesViscoSampler with powerful suction for viscous media. The media is drawn up anddischarged using the suction flask. Made of ultra-pure, chemically inert PTFE/FEPfor contamination-free sampling.Specially developed for viscous substances such as slurries, silt, wet clay and soilsamples, soil sediments, oils, emulsions, creams etc.Colour-coded handles to prevent mix-up, available as optional accessories.Easy cleaning - all surfaces are poreless and without crevices. Dirt accumulationis prevented. Only round screw threads tried and tested in the field of food hygieneare used. Disassembly and cleaning are extremely simple.QualiSampler setThe handy set, which comes complete withcarrying case, combines the LiquiSamplerand the ViscoSampler with practical accessories.Models in PP or PTFE/ FEP.ViscoSamplerMaterial Length cm Dia. mm Capacity ml Price € Item no.PP, transparent 60 25 160 215.35 5331-1060 N4PP, transparent 100 25 300 254.35 5331-1100 N4PP, transparent 200 25 650 377.55 5331-1200 N4PTFE/FEP, transparent 60 25 160 288.85 5331-2060 N4PTFE/FEP, transparent 100 25 300 328.00 5331-2100 N4PTFE/FEP, transparent 200 25 650 463.75 5331-2200 N4AccessoriesDescription Price € Item no.Handles ViscoSampler set in blue, green, yellow, white and black 39.85 5331-0020 N4Cleaning brushes 25 mm dia., length 100 cm 35.60 5304-0100 N4Drain safety stand, see page 55 42.25 5618-1000 N4QualiSampler set consisting of:LiquiSampler, 100 cmViscoSampler, 100 cmCase, five bottles, cleaning brushQualiSampler setMaterial Price € Item no.PP 471.95 5330-1000 N4PTFE / FEP 662.95 5330-1001 N4100www.buerkle.de | info@buerkle.de | Hotline +49 (0) 76 35 8 27 95-0

LiquiSampler | sample collector for liquidsLiquiSampler for liquids, according to DIN 53 242. Made of ultra pure and chemically inertPTFE/FEP or PP for contamination-free sampling.Sampling from open and closed containers, barrels, tanks, silos, water courses. Suitable forall commercially available barrels and containers with opening of at least 25 mm in diameter.Push-buttons colour-coded to prevent mix-up, available as optional accessories.Easy cleaning - all surfaces are free of pores and crevices, preventing accumulation of dirt.Only round screw threads proven in foodstuffs hygiene are used. Disassembly and cleaningare extremely simple.Practical one-handed use at the push of a buttonWith scraping ring for marking of depth and cleaningTransparentAvailable in PTFE/ FEP or PP transparentPoint sampling, all-layer and soil samples possibleUseAll-layer sample1. Slowly insert the LiquiSampler into the liquid with the button pressed.2. Release the push-button, the valve closes.3. Withdraw the lance and take out the sample.Point sampling/soil sample1. Insert the LiquiSampler to the targeted point/to the ground with closed valve.2. Press the button - the liquid flows in.3. Release the push-button, the valve closes.4. Pull out the LiquiSampler, take out the sample.LiquiSamplerMaterial Length cm Dia. mm Volume ml Price € Item no.PP, transparent 60 25 150 139.35 5330-1060 N4PP, transparent 100 25 250 185.45 5330-1100 N4PP, transparent 200 25 500 277.50 5330-1200 N4PTFE/FEP, transparent 60 25 150 215.35 5330-2060 N4PTFE/FEP, transparent 100 25 250 287.75 5330-2100 N4PTFE/FEP, transparent 200 25 500 397.10 5330-2200 N4AccessoriesDescription Price € Item no.Push-buttons for set LiquiSampler in blue, green, yellow, white and black 24.05 5330-0149 N4Cleaning brushes 25 mm dia., length 100 cm 35.60 5304-0100 N4101

Dip Sampler, plunging siphonUseAll-layer sample1. Insert the dip sampler slowlyinto the liquid with the valveopen.2. Close valve.3. Pull the dip sampler backand take out the sample.Point sampling/soil sample1. Insert the dip sampler to thetargeted point/to the groundwith closed valve.2. Open the valve - the liquidflows in.3. Close the valve.4. Pull out the dip sampler,take out the sample.Dip sampler for simple removal of liquid samples. Good view due totransparent tubes. Upper end with reflux valve, lower end with ballvalve. PP, transparent Dip sampler, item no. 5315-0200, steplessly extendable from100 cm to 200 cm All-layer and point sampling possible102Dip Sampler, plunging siphonLength cm Tube Ø mm Price € Quantity scale Scale price € Item no.from50 22 38.90 5 35.45 5315-0050 N4100 22 41.75 5 38.05 5315-0100 N4100 - 200 22 50.20 5 45.10 5315-0200 N4www.buerkle.de | info@buerkle.de | Hotline +49 (0) 76 35 8 27 95-0

Disposable plunging siphonPTFE ScoopIf strongly adhesive liquids are sampled, it can be a lot less expensiveto dispose of the sampler than to carry out a complicatedcleaning process.The disposable dip sampler were developed especially for this purpose.They are made of PE, transparent and the contents are easilyvisible. PE provides a surface that resists adhesion of the samplematerial, minimising sample retention on the dip sampler.Use1. Insert the sampler into the liquid and fill it.2. Close the thumbhole above the handle using your thumb.3. Take out the dip sampler and empty the liquid into the samplebottle.Disposable plunging siphonCapacitymlInsertiondepthmmTotallengthcmTube ØmmPrice €QuantityscalefromScaleprice €Item no.75 350 50 27 8.10 12 7.35 5387-0050 N4175 600 75 27 14.60 12 12.90 5387-0075 N4275 850 100 27 20.80 12 18.90 5387-0100 N4Scoop PTFE 10 ml with fixed rodAll parts coming into contact with the sample medium are made ofpure white PTFE. Completely inert against all substances (with theexception of elementary fluoride). The rod is stabilised with a steelcore which is completely encapsulated in PTFE. The 60 cm long rodcan be extended to 120 cm by adding another component. Thescoop PTFE with 10 ml has a strong rod with a length of 155 mm.PTFE ScoopCapacity ml Dia. mm Height mm Price € Item no.10 25 34 46.20 5389-0010 N2100 55 65 102.20 5389-0100 N2250 70 95 114.90 5389-0250 N2500 80 125 140.50 5389-0500 N21000 105 155 178.90 5389-1000 N2AccessoriesDescription Price € Item no.Extension for PTFE scoop, 60 cm 80.70 5389-0001 N2103

Chemistry scoopStainless steel scoopIn contrast to conventional scoops, the stainless steelscoop has no openings, undercuts or crevices in whichresidues could collect. Pore-free finishing produced byhigh-quality laser welding seams.The stainless steel scoop can be flame-sterilised andcan therefore be made completely germ-free.Scoop for aggressive liquids, complete with strong handle, entirely made of polypropylene.Rod length 100 cm, Ø 20 mmWithout metal partsScoop made of stainless steel V2A (1.4301), completewith rodSterilisable by flame sterilisation or steam sterilisationChemistry scoopCapacity ml Price € Quantity scale from Scale price € Item no.250 55.60 10 50.20 5353-0250 N4600 57.55 10 51.70 5353-0500 N41000 58.90 10 52.85 5353-1000 N4Stainless steel scoopTotal length cm Capacity ml Price € Item no.115 1000 209.60 5354-1000 N4104www.buerkle.de | info@buerkle.de | Hotline +49 (0) 76 35 8 27 95-0

Liquid-Sampler | single hand operationSampler for thin to viscous liquids. Easy use with one-handed operation.With discharge funnel for safe filling of the sample bottles.Material V4A (1.4404).The valve is opened with thethumb to empty the sample.The valve is opened by attachingthe sample container to emptythe sample.Liquid-Sampler, open with thumbTotal Container Capacity ml Price € Quantity Scale Item no.length cm dia. mmscale from price €46 32 50 134.75 5 131.90 5326-0001 N454 32 100 148.60 5 142.85 5326-0002 N4Liquid-Sampler, place onto bottleContainer Total Capacity ml Price € Quantity Scale Item no.dia. mm length cmscale from price €32 45,5 50 165.05 5 149.10 5326-0003 N432 53,5 100 177.35 5 161.40 5326-0004 N4105

TeleScoop | for industry and water treatment2 3 42 Angular beakerThe beaker is adaptableto different containershapes by adjustable anglesetting (up to 90°).3 Pendulum beaker PPThis beaker automaticallyswings to a horizontalposition. Nothing can bespilt. Suitable thereforefor deep and narrowshafts (Ø 150 mm).4 Pendulum beakerstainless steelThis beaker automaticallyswings to a horizontalposition. Nothing can bespilt. Suitable thereforefor deep and narrowshafts (Ø 130 mm).TeleScoop is a versatile sampling system with exchangeabletools for a wide range of applications.The tools (angular beaker, pendulum beaker, bottleholder, stainless steel beaker and dip net) are attachedto the rod by a practical snap-in joint.Ideal for sampling from baths, tanks, shafts, open watercourses etc. Sampling depths down to 6 m can bereached with the adjustable telescopic aluminum rod.1For industry and water treatment Polypropylene Polypropylene Stainless steel V2A(1.4301)1 Telescopic rodDifferent tools can be attached to the telescopic rod (snap-in joint). The individualrods have been provided with an end stop. This means that one rod cannot accidentallyslip out of another rod. The telescopic rods cannot be rotated radially,which means even better handling!Telescopic rod 5355-0280, extremely short model - yet extendable up to 280 cm.Fits into every car boot!Increased telescopic rod rigidity by using cold-rolled profile rodSprings made of stainless steel106www.buerkle.de | info@buerkle.de | Hotline +49 (0) 76 35 8 27 95-0

TeleScoop | for industry and water treatment5 6 7 85 Bottle holderHolds all bottles up to 88mm Ø. Plastic, glass ormetal bottles can be securelyfilled in this way.Angle steplessly adjustableup to 90°. With universal quicktightening strap Polypropylene/PA6 Stainless steelbeakerBeaker with scraper, contents1000 ml. Ideal forpowder, granules, pastes,mud.SterilisableStainless steel V2A(1.4301)7 Surface catch netCatch net for taking solidand organic samplesfrom water courses.PVC/PA blueL 310 x W 280 mmMesh width 2 - 5 mm8 Depth catch netCatch net for taking solid and organic samples fromwater courses.PP/PA blueL 190 x W 430 mmNet depth 250 mmMesh width 2 - 5 mm11 Telescopic rodModel Capacity ml Price € Quantityscale fromLength infinitelyvariablefromNo. of rods Price € Quantity scale Scale price € Item no.22from65-120 cm 2 23.00 10 20.95 5355-0120 N4125-250 cm 2 29.45 10 27.45 5355-0250 N495-280 cm 4 46.00 10 41.60 5355-0280 N4115-300 cm 3 46.00 10 41.60 5355-0300 N4165-450 cm 3 64.20 10 57.50 5355-0450 N4175-600 cm 4 78.80 10 73.10 5355-0600 N4233345678Scale Item no.price €Scoop angular beaker 600 46.00 10 41.70 5354-0050 N4Scoop angular beaker 1000 46.95 10 42.15 5354-0100 N4Scoop angular beaker 2000 51.60 10 46.30 5354-0200 N4Pendulum beaker PP 600 42.95 10 38.70 5354-5050 N4Pendulum beaker PP 1000 45.05 10 40.35 5354-5100 N4Pendulum beaker PP 2000 49.00 10 44.30 5354-5200 N4Pendulum beaker V2A 1000 146.20 5 134.90 5354-3000 N4Bottle holder 750 53.70 10 48.20 5354-4100 N4Stainless steel beaker 1000 108.00 5 96.70 5354-2000 N4Surface catch net 50.70 5 47.65 5354-5020 N4Depth catch net 55.40 5 52.00 5354-5010 N4107

Sampler Liquid CupSamplerIt is possible to carry out pointsampling of liquids of varyingviscosity with the stainless steelLiquid CupSampler (V4A(1.4404)). Media-containingparticles can also be sampledwithout difficulty.The sampler can be used in thefields of chemistry, foodstuffsand cosmetics.The cup can be unscrewed fromthe stem, allowing easy cleaning.ChemoSampler | for acids, alkalis, detergentsThe ChemoSampler was developedfor sampling aggressiveliquids, e.g. acids, alkalis, detergents.The samples are drawndirectly into the screw-on originalsampling bottle. The tamperproofbottle closure of thesebottles with original safety ringensures unadulterated sampletransport. Samples can be takenfrom depths of as much as 200cm, e.g. from tanks, silos ortankers, by using the extensionrod.Use1. Place the collector at thedesired depth.2. Open the lid using the handle.The liquid flows in.3. Close the filled collector andremove it.4. Empty the sample into thesample bottle.PP, greyResistant to acids and alkalisIncl. sample bottle 1000 mlExtension rod 100 cm andtwo bottle sizes available asaccessories.Attention! Make sure topay attention to the “Listof Chemical Resistance“!Sampler Liquid CupSamplerCapacity ml Container dia. Total length cm Price € Item no.mm100 55 100 657.30 5357-0001 N4ChemoSamplerPrice € Quantity scale from Scale price € Item no.63.50 5 55.60 5336-1000 N4AccessoriesDescription Price € Item no.Extension for ChemoSampler 100 cm 31.45 5336-0100 N4Sampling bottle PE, 500 ml 2.26 0342-0500 N3Sampling bottle PE, 1000 ml 2.32 0342-1000 N3108www.buerkle.de | info@buerkle.de | Hotline +49 (0) 76 35 8 27 95-0

Bürkle worldwideEven if we are not just round the corner,one of our partners is sure to be not far from you!Are you looking for a local contact or sales partner?Under www.buerkle.de Company Distributors & Partners you can find outwho your local direct contact to Bürkle is – even worldwide.109

MiniSampler | taking samples – comfortable, quick and clean samplingWith the vacuum sampler MiniSampler, the sample liquid onlycomes into contact with the suction hose and the original samplebottle. The possibility of cross-contamination is greatly reduced. Immediatelyafter taking the sample, the bottles are sealed. The disposablesuction hose can quickly be replaced. This guarantees thatthe samples are never contaminated. If necessary, a new hose canbe used for every single sample.Due to its small diameter (8 mm), the hose can reach narrow, seeminglyinaccessible sampling areas.Two models:PE MiniSampler for general sampling, max. suction height 5 m*PTFE MiniSampler for ultra-pure sampling, max. suction height 5 m** depending on the mediumAlso suitable for viscous oilsComplete in a handy transport caseUse1. Insert the hose and the bottle into the pump.2. Insert hose end to desired sample depth.3. Move the pump piston back and forth and collect the sample.The liquid flows directly into the bottle.4. Take off the filled bottle, close and label it.Not for aggressive acids. Vapors could destroy pump.110www.buerkle.de | info@buerkle.de | Hotline +49 (0) 76 35 8 27 95-0

MiniSampler PE | for general samplingMiniSampler PTFE | for ultrapure samplingIdeal for general sampling from barrels, canisters, tanks etc.MiniSampler PE complete with accessories in transport case, contents:Vacuum pump, 10 PE bottles, 100 ml, 10 m PE suction hose 6x 8 mm, 1 hose cutter, 1 stainless steel hose weight made of V2A(1.4301), 20 seal-it bottle seals.Ideal when maximum purity is needed.MiniSampler PTFE complete with accessories in its transport case,contents: Vacuum pump, 1 sample bottle PFA 180 ml, 5 m PTFE suctionhose 6 x 8 mm, 1 hose cutter, 1 stainless steel hose weightmade of V2A (1.4301), 20 seal-it bottle seals.MiniSampler PEPrice € Quantity scale from Scale price € Item no.154.30 5 137.00 5305-0100 N4AccessoriesDescription Price € Item no.MiniSampler pump with adapter 66.85 5305-0010 N4MiniSampler standard pump 42.60 5305-0011 N4MiniSampler adapter for glass thread GL 45 118.60 5305-0209 N4MiniSampler adapter for sample tubes PFA 6205-0090, 6202-0180 72.50 5305-1020 N2Hose cutter 7.00 0006-9506 N3Sampling bottle HDPE, 100 ml 1.50 0340-0100 N3Sampling bottle HDPE, 250 ml 1.83 0340-0250 N3Sampling bottle HDPE, 500 ml 2.15 0340-0500 N3Sampling bottle HDPE, 1000 ml 2.78 0340-1000 N3Suction hose PE on roll 6 x 8 mm, roll with 10 m 13.35 8805-0608 N3Suction hose PE on roll 6 x 8 mm, roll with 100 m 41.95 8878-0608 N3MiniSampler PTFEPrice € Quantity scale from Scale price € Item no.253.35 5 230.20 5305-0110 N4AccessoriesDescription Price € Item no.MiniSampler pump with adapter 66.85 5305-0010 N4MiniSampler standard pump 42.60 5305-0011 N4MiniSampler adapter for glass thread GL 45 118.60 5305-0209 N4MiniSampler adapter for sample tubes PFA 6205-0090, 6202-0180 72.50 5305-1020 N2Hose cutter 7.00 0006-9506 N3Sample boxes PFA, 90 ml 52.60 6205-0090 N3Sample boxes PFA, 180 ml 68.10 6205-0180 N3Suction hose PTFE on roll 6 x 8 mm, roll with 5 m 37.65 8804-0608 N3111

ProfiSampler | vacuum-operated sample collector for robust industrial useAssessment of IgnitionRisks, usable in:Zones 0 and 1Explosion groupsII A, II B, II CDEKRA EXAM GmbHIdentification N o. 0158testedWhile the MiniSampler is designed for laboratory use, the ProfiSamplerhas been specially developed for rough industrial use.ApplicationsSampling liquids in barrels, tanks, lorries, railway goods wagons,ships, water courses, ground water, etc.Vacuum samplers have the advantage that the sample liquid onlycomes into contact with the suction hose and the original samplebottle. The possibility of cross-contamination is greatly reduced. Immediatelyafter taking the sample, the bottles are sealed. The disposablesuction hose can quickly be replaced. This guarantees thatthe samples are always authentic. If necessary, a new hose can beused for every single sample.Due to its small diameter (8 mm), the hose can reach narrow, seeminglyinaccessible sampling areas.The ProfiSampler can be extended with useful accessories developedin practice.Attention! Make sure to pay attention to the “List of ChemicalResistance“!ProfiSampler Aluminium11Three feet guarantee that the ProfiSampler stands safely.Fill level control, automatic return flow and overfill protectionthrough built-in venting valve.Available with suction hose in PE, PA and PTFE wherever thehighest degree of purity is requiredCan be supplied with straight suction tubes for simpler sampling,incl. transport case for tidy transport and disposal of thesuction tubesSuction volume 200 ml, suction pressure 0.5 barSuction height from liquid surface 5 m WSSample bottles available in different materials and sizes112www.buerkle.de | info@buerkle.de | Hotline +49 (0) 76 35 8 27 95-0

ProfiSampler | vacuum-operated sample collector for robust industrial use1 ProfiSampler AluminumProfiSampler aluminium for solvents and flammable liquids in ExplosionCategories IIA and IIB. With bottle thread GL 45 (suitablefor Schott glass bottles 100 ml to 1000 ml).When taking samples of flammable liquids, the device must beearthed. For this, earthing cable and, possibly in addition, anti-staticset should be used, see accessories.ProfiSampler aluminium, consisting of: Vacuum pump made of aluminium,with feet, venting valve and bottle thread GL 45 with glassbottle 500 ml, 5 suction tubes PA black, 220 cm long, electricallyconductive, hose cutter, brass hose weight, 20 seal-it bottle seals,earthing cable.2 Profi Sampler PPProfiSampler PP for general samples, for weak acids, alkalis, detergents,chemical baths. Made of solid, chemical resistant Polypopylene.ProfiSampler PP, consisting of: Vacuum pump, made of solid PP, withfeet, venting valve and bottle thread, 1 PP bottle 250 ml, 10 m PEsuction hose (roll), 1 hose cutter, 1 stainless steel hose weight madeof V2A (1.4301), 20 seal-it bottle seals.2 ProfiSampler PP3 Straight suction tubes (PE or PA) have the advantage that theyare not slightly bent as is the standard tubing (from the roll) andcan therefore be immersed absolutely vertically into the container.The suction tubes are available in transparent PE for general samplingand black PA for flammable liquids in VbF Hazard Category AI(electrically conducting). Diameter 6 x 8 mm. Contaminationbanned! In practice the low-priced tubes are only used once. Theyare then disposed of, instead of being subjected to a costly cleaningprocess. The tubes are not autoclavable.4 Transport case for straight suction tubes for the practicaltransport of new suction tubes and the safe storage of used ones.Suitable for 100 suction tubes, 220 cm long.1ProfiSampler AluminumPrice € Quantity scale from Scale price € Item no.394.15 5 358.40 5305-1100 N4AccessoriesDescription Price € Item no.Glass sampling bottle 100 ml 6.20 5314-0010 N3Glass sampling bottle 250 ml 10.50 5314-0025 N3Glass sampling bottle 500 ml 10.00 5314-0050 N3Glass sampling bottle 1000 ml 11.70 5314-0100 N33 Straight suction tube, PE transparent, 200 cm, 10 pieces 99.00 5305-1022 N43 Straight suction tube, PA black, electrical conductive, 220 cm, 10 pieces 125.55 5305-1024 N44 Transport case for straight suction tubes 113.95 5305-1029 N4Anti-static set 43.25 5602-1000 N4Suction hose PE on roll 6 x 8 mm, roll with 10 m 13.35 8805-0608 N3Suction hose PE on roll 6 x 8 mm, roll with 100 m 41.95 8878-0608 N3Suction hose PTFE on roll 6 x 8 mm, roll with 5 m 37.65 8804-0608 N32Profi Sampler PPPrice € Quantity scale from Scale price € Item no.291.55 5 190,25 5305-1000 N4AccessoriesDescription Price € Item no.3 Straight suction tube, PE transparent, 200 cm, 10 pieces 99.00 5305-1022 N43 Straight suction tube, PA black, electrical conductive, 220 cm, 10 pieces 125.55 5305-1024 N44 Transport case for straight suction tubes 113.95 5305-1029 N4Sampling bottle PP, 250 ml 1.78 0319-0250 N3Suction hose PE on roll 6 x 8 mm, roll with 10 m 13.35 8805-0608 N3Suction hose PE on roll 6 x 8 mm, roll with 100 m 41.95 8878-0608 N3113

Liqui zone samplersUp to three point samples from differentdepths of a liquid can be taken with theBürkle zone sampler for liquids.If particles separate in liquids or emulsions,if the components de-mix or they form differentlayers, then sampling from variousdepths and areas is necessary to obtain arepresentative sample.With the handy carrying case, the samplescan be emptied directly into the sample bottles.The Liqui zone sampler can be easilycleaned, it has good chemical resistanceand is suitable for food, because the mediumonly comes into contact with the hose.The suction hoses made of PE or PTFE canbe adjusted to the required length and canbe replaced any time as cost-effective accessories.The device is ideal for use with barrels,tanks, wells, waste water plants and waterpurification plants.Liqui zone sampler electricThe electrical version of the Liqui zone sampleris equipped with a drive unit poweredby re-chargeable batteries. This providesflexibility and means independence from themains power.The electrical operation guarantees fast andcomfortable sampling of larger quantities.Three peristaltic pumps draw in the medium.The pumps are also suitable for media containingparticles. A suction depth of five metrescan easily be reached this way. The deliveryrate of each pump is 2 l/min.Suction height up to 5 mDelivery rate 2 l/mLiqui zone sampler manualThe manual zone sampler for liquids is operatedwith a vacuum pump.If the earthing cable is used, the Liqui zonesampler can also be used for flammable liquids.The vacuum pump can reach suction of 0.5bar and therefore has a suction height ofabout 4 metres.Suction height up to 4 mSuction pressure 0.5 barAttention! Make sure to pay attentionto the “List of Chemical Resistance“!Liqui zone sampler electricPrice €Item no.1612.60 5329-2000 N4Liqui zone sampler manualPrice €Item no.566.80 5329-1000 N4114www.buerkle.de | info@buerkle.de | Hotline +49 (0) 76 35 8 27 95-0

UniSampler with hoseUniSampler “Ex”UniSampler with PVC hose and hose weight made of stainless steel.For deep, hard-to-reach places. The mass of the metal tube dragsthe hose to any depth. Suction hose PVC, 2.50 m long Complete in a handy transport case incl. sample bottle PP 1000ml, vacuum pump, adapter for sample bottles 100 - 1000 ml,hose weight made of V2A, 20 seal-it bottle seals Universal bottle adapter made of PVC, for bottle necks Ø 24mm, 32 mm, 39 mm and 50 mm nominal dimensionUse1. Lower the suction hose to the required depth.2. Attach the adapter to the sampling bottle.3. Create a vacuum using the handpump and collect the sample.4. Remove the filled sample bottle, close and label it.UniSampler with hosePrice € Quantity scale from Scale price € Item no.152.05 5 135.80 5314-2000 N4AccessoriesDescription Price € Item no.Suction hose for replacement PVC, 2,5 m 1.71 5314-2002 N4Sampling bottle PP, 100 ml 1.30 0319-0100 N3Sampling bottle PP, 250 ml 1.78 0319-0250 N3Sampling bottle PP, 500 ml 2.93 0319-0500 N3Sampling bottle PP, 1000 ml 4.88 0319-1000 N3Especially developed for sampling flammable liquids of Hazard CategoryAI (VbF, e.g. fuel). Glass bottle and hose are connected in sucha way that they conduct electricity and are earthed via an earthing cable. Complete in a handy transport case incl. 4m hose, glass bottle1000 ml, bottle adapter, vacuum pump, earthing cable andhose-weight made of brass PTB approval D-333-009 618/00Use1. Earth the device.2. Lower the suction hose to the required depth.3. Attach the adapter to the sampling bottle.4. Create a vacuum using the handpump and collect the sample.5. Remove the filled sample bottle, close and label it.The UniSampler ”Ex” was developed in co-operation with thequality associationTankschutz e.V. (non-profit association fortank protection).UniSampler “Ex”Price € Quantity scale from Scale price € Item no.274.60 5 259.85 5314-3000 N4AccessoriesDescription Price € Item no.Glass sampling bottle 1000 ml 11.70 5314-0100 N3115

UniSampler with suction lanceUse1. Set the desired sampling depth bymoving the suction lance.2. Attach the adapter to the samplingbottle.3. Lower the suction lance into themedium.4. Create a vacuum using the handpumpand collect the sample.5. Remove the filled sample bottle,close and label it.Bürkle photo studio» «A good photo is a photo that youlook at for more than one second.Henri Cartier-BressonDid you know that practically all the product photos inthis catalogue were created in our in-house photo studio?For application pictures, our staff even take on the role ofphoto model – so that you can get a realistic impressionof our products.The collection lance consists of an inner tube and an outer tube. The suction positioncan be varied steplessly with the outer tube within a height of 0 to 48 cm.The total length of the telescopic suction tube is 100 cm.Suction tube PP, suction hose PVCIncl. 5 sample bottles each PP 250 ml and 500 ml, vacuum pump, adapter forsample bottles 100 - 1000 ml, 20 seal-it bottle sealsUniversal bottle adapter made of PVC, for bottle necks Ø 24 mm, 32 mm, 39mm and 50 mm nominal dimensionUniSampler with suction lancePrice € Quantity scale from Scale price € Item no.187.70 5 166.90 5314-1000 N4AccessoriesDescription Price € Item no.Sampling bottle PP, 100 ml 1.30 0319-0100 N3Sampling bottle PP, 250 ml 1.78 0319-0250 N3Sampling bottle PP, 500 ml 2.93 0319-0500 N3Sampling bottle PP, 1000 ml 4.88 0319-1000 N3Are you a keen photographer?… then take one of the Bürkle products in day-to-dayuse as a subject!We look forward to receiving your practical applicationphoto – if it is published in the next Bürkle catalogue,we will reward you with 100 Euros!116

Vampire Sampler | for sampling liquids in the fieldTransportable, hose pump for liquids, independent ofmains power. Ideal for sampling from barrels, tanks,wells, water separators and sewage and purificationsystems.Vampire is packed in a handy transport case with:drive unit (12 V), two re-chargeable batteries, batterycharger, bottle holder, bottle LDPE 250 ml, hose pumpand 5 m hose made of PEEasy cleaning, liquid is only in contact with thehoseIndependent of mains power with re-chargeablebatteries and charger, incl. replacement batterySampling directly into the original sample bottleSuction height up to 5 mAlso suitable for contaminated substances or mediacontaining particlesGood chemical resistanceGood delivery rate up to 2.0 l/minVampire SamplerPrice € Quantity scale from Scale price € Item no.692.95 5 660.60 5327-1000 N2AccessoriesDescription Price € Item no.Suction hose Marprene for Vampire 38.65 5327-0508 N2Basket for sample bottles 70.25 5302-2050 N2Sampling bottle LDPE 500 ml 2.60 0318-0500 N3Suction hose PE on roll 6 x 8 mm, roll with 10 m 13.35 8805-0608 N3Suction hose PE on roll 6 x 8 mm, roll with 100 m 41.95 8878-0608 N3117

Dipping bottlesDipping bottleDipping bottle with glass container forsampling in sewage plants, for mud andwater samples. For testing crude oil,liquid mineral oil products, fuels, specialand test fuels, fuel oils, petroleumand liquid lubricants of Hazard CategoriesIIA and IIB. Completely made fromnon-spark producing materials Dippingframe made of nickel-plated brass,easy-click closure made of electricallyconductive polyamide.UtilitymodelDipping containers are used in various areas to collect liquids forsampling. Bürkle produces the most comprehensive collection ofdipping containers by a long way, the right product for every use asit were.Bürkle offers dipping bottles and immersion cylinders for sediments,for the area of environmental issues, for chemically aggressive products,for petrochemistry, for the ex protection area. The dipping bottlesfor the Ex protection area are made of nickel-plated brass,therefore they do not oxidise.Dipping vessels can be used for point sampling, all-layer samplesand soil samples.Dipping vessels are heavy. Lowering requires the use of specialmanually-operated drum reels with a large winding diameter. Othermanually-operated drum reels place too much strain on the user’swrist and could represent a health hazard. Lowering cables andchains made from different materials, as well as manually-operateddrum reels, also for Ex-proof applications, available as accessories.Observe Ex-proof guidelines when sampling flammable liquids.Only use conductive lowering cables made of nonspark-producingmaterial and conductive hand reels with groundingconnection (see page 122).With Easy-Click, safe and practicalclosure for a rapid bottle exchangeHigh weight (3.1 kg) for fast loweringBottle made of transparent glass1000 ml contentsHeight with handles 330 mmPlease order the appropriate loweringcable at the same time (p. 122)Tested for use in the Ex protectionzone 0Use1. Lower the dipping bottle to the required depth.2. Pull chain/cable with a short, powerful jerk, the stopper opens.3. The sample flows into the bottle4. Raise the bottle with the chain/ cable.5. Open the Easy-Click closure, remove the bottleDipping bottleAssessment of IgnitionRisks, usable in:Zones 0 and 1Explosion groupsII A, II BDEKRA EXAM GmbHIdentification N o. 0158testedCapacity ml Dia. mm Price € Item no.1000 125 374.05 5365-4000 N4118www.buerkle.de | info@buerkle.de | Hotline +49 (0) 76 35 8 27 95-0

Dipping bottle ExDipping bottle for testing mineral oil products CategoryA, Explosion Categories IIA, IIB and IIC,crude oil, liquid mineral oil products, fuels, specialand test fuels, fuel oils, petroleum and liquid lubricants.Completely made from non-spark producingmaterials, nickel-plated Screw-off bottle head - easy cleaning. Robust handle High weight (3.0 kg) for fast lowering 1000 ml contents Height with handles 385 mm Please order the appropriate lowering cable atthe same time (p. 122) Tested for use in the Ex protection zone 0Assessment of IgnitionRisks, usable in:Zones 0 and 1Explosion groupsII A, II B, II CDEKRA EXAM GmbHIdentification N o. 0158testedUse1. Lower the dipping bottle to the required depth.2. Pull chain/cable with a short, powerful jerk, the stopper opens.3. The sample flows into the bottle4. Raise the bottle with the chain/ cable.5. Open the closure, empty the bottleDipping bottle ExCapacity ml Dia. mm Price € Item no.1000 75 366.00 5365-3000 N4Immersion cylinderImmersion cylinder for sampling crude oil, liquidmineral oil products, fuels, special and test fuels,fuel oils, petroleum and liquid lubricants in ExplosionCategories IIA, IIB and IIC. Completely madefrom non-spark producing materials, nickel-plated Screw-off top enables easy cleaning. High weight (4.1 kg) for fast lowering Robust handle 1000 ml contents Height with handles 380 mm Please order the appropriate lowering cableat the same time (p. 122) Tested for use in the Ex protection zone 0UsePoint sampling1. Two lowering cables are required for this (bearercable and hauling cable)2. Lower the immersion cylinder to the required depth3. When the target has been reached, pull on the haulingcable, the valve opens.4. The sample flows into the bottle5. Release the hauling cable. The valve closes. Pull the cylinderback on the bearer cable6. Empty the cylinder via the valve at the bottomSoil sample1. Lower the immersion cylinder on the cable to the ground2. The valve opens automatically because of the immersion cylinder’sown weight3. The sample flows into the cylinder4. Pull the cylinder back on the cable, the valve closes independently5. Empty the cylinder via the valve at the bottomImmersion cylinderUtilitymodelAssessment of IgnitionRisks, usable in:Zones 0 and 1Explosion groupsII A, II B, II CDEKRA EXAM GmbHIdentification N o. 0158testedCapacity ml Dia. mm Length mm Price € Item no.1000 75 380 477.70 5365-7000 N4119

Dipping vesselDipping vessel for taking all-layersamples from tanks, tankwagons, water courses, waterpurification plants.Assessment of IgnitionRisks, usable in:Zones 0 and 1Explosion groupsII A, II B, II CDEKRA EXAM GmbHMini immersion cylinderFor sampling liquids in narrow places where accessis difficult. Can also be used in curved dipping tubesand barrels with narrow openings.Diameter only 32 mm.With Easy-Flow, the flowoptimised flow valveHigh weight (1.9 or 2.1 kg)for faster loweringContents 1000 mlHeight with handles 400 mmMade of non- spark producingbrass or stainless steelV2A (1.4301) for Ex areaExplosion Categories IIA, IIBand IICPlease order the appropriatelowering cable at the sametime (see page 122)Tested for use in the Ex protectionzone 0Identification N o. 0158tested50 ml contentsHeight 180 mmWeight 280 gStainless steel V2A (1.4301)Please order the appropriate lowering cable atthe same time (see page 122)Screw-off top enables easy cleaning.Tested for use in the Ex protection zone 0Explosion Categories IIA and IIBAssessment of IgnitionRisks, usable in:Zones 0 and 1Explosion groupsII A, II BDEKRA EXAM GmbHIdentification N o. 0158testedUse1. When the dipping vessel is lowered, the liquid constantly runsthrough it.2. When it is pulled back, both valves close automatically.3. Emptying at the top via the open flaps.Use1. When the dipping vessel is lowered, the liquid constantly runsthrough it.2. When it is pulled back, both valves close automatically.3. It can be emptied via the base valve or the upper screw-off cap.Dipping vesselMaterial Weight g Dia. mm Price € Item no.brass 2100 81 425.90 5365-1000 N4stainless steel AISI 304 1900 81 837.75 5365-2000 N4Mini immersion cylinderCapacity ml Dia. mm Height mm Price € Item no.50 32 180 234.80 5365-5000 N4120www.buerkle.de | info@buerkle.de | Hotline +49 (0) 76 35 8 27 95-0

Target immersion cylinderAquaSamplerPrecise liquid samples can be taken with the Target immersion cylinder. Weight 2.5 kg Incl. venting lowering cable (5 m), valve and cable reel Screw-off top enables easy cleaning.Use1. Lower the immersion cylinder to the required depth on the hightensile,closed hose.2. When the target has been reached, open the air valve at thetube end.3. This vents the immersion cylinder and fills it.4. Retrieve the immersion cylinder.5. Open the cover and pour out the sample.Target immersion cylinderCapacity ml Dia. mm Height mm Price € Item no.500 75 200 317.75 5365-6000 N4Sampler for ground water samples from wells, pits and other sources.Fits all normal well shafts with control openings to Ø 2“, withouttilting or getting stuck. Ultra pure materials guarantee the highestdegree of sample purity. Easy to clean thanks to rounded edgesand threads.FEP/PTFE ultra pure, anti adhesive surfaceWithout cableAvailable as accessory: Robust manually-operated drum reel PP Lowering cable, V2A-woven, PTFE coated (p. 122)AquaSamplerCapacity ml Total Outer dia. Price € Quantity Scale Item no.length cm mmscale from price €350 40 46 246.40 5 213.45 5308-0350 N4700 76 46 271.15 5 252.40 5308-0700 N41050 107 46 321.95 5 285.10 5308-1050 N4121

Manually-operated reelsLowering cables4 5 6 71 2 3Stainless steel loweringcable,Lowering cable V2APTFE-coatedLowering cable plasticCopper cable withloopsManually-operated drumreel PPThe manually-operated drum reels are used to lowerdipping bottles and immersion cylinders safely to therequired depth in shafts, wells and tanks and then topull them up again. The manually-operated drumreels can be equipped with various cables or chains.If flammable or highly flammable liquids are to becollected, then electrically conductive manually-operateddrum reels must be used together with anearthing cable. The dipping bottles must be made ofnon-sparking metal.123122Manually-operated drumreel PA electrically-conductiveHigh winding capacity of up 150 m for cable 2mm dia.Reel width: inner 44 mm, outer 55 mm, reel diameter:inner 100 mm, outer 180 mmPlease order the required lowering cableseparately.Manually-operated reel Exwith grounding cableAssessment of IgnitionRisks, usable in:Zones 0 and 1Explosion groupsII A, II B, II CDEKRA EXAM GmbHIdentification N o. 0158testedManually-operated reelModel Price € Item no.Manually-operated reel PP 66.85 5309-0010 N4Manually-operated reel PA 113.95 5309-0020 N4Manually-operated reel Ex withgrounding cable178.50 5309-0030 N4LoweringcablesFor dipping bottlesand immersioncylinders,matching manually-operateddrum reels madeof various materials.Tensile loadmax. up to 10 kg.444555666777888910Lowering cables8 9 10Lowering/ hoistingchainSnap-hook V4ABrass shackleModel Length m Dia. mm Price € Item no.Stainless steel lowering cable, PTFE-coated 10 2 30.55 5309-0110 N4Stainless steel lowering cable, PTFE-coated 25 2 72.50 5309-0125 N4Stainless steel lowering cable, PTFE-coated 50 2 140.50 5309-0150 N4Stainless steel lowering cable 10 1,25 24.15 5309-0301 N4Stainless steel lowering cable 25 1,25 50.65 5309-0302 N4Stainless steel lowering cable 50 1,25 93.30 5309-0305 N4Lowering cable made of PP cord 10 2 9.45 5309-0201 N4Lowering cable made of PP cord 25 2 21.55 5309-0202 N4Lowering cable made of PP cord 50 2 41.40 5309-0205 N4Copper lowering cable 10 4,5 83.05 5309-0410 N4Copper lowering cable 25 4,5 184.20 5309-0425 N4Copper lowering cable 50 4,5 356.75 5309-0450 N4Chains 10 2,3 88.80 5309-0510 N4Chains 25 2,3 210.65 5309-0525 N4Chains 50 2,3 369.55 5309-0550 N4Snap hooks V4A 6.70 0006-5300 N4Shackle 9.55 0006-5301 N4www.buerkle.de | info@buerkle.de | Hotline +49 (0) 76 35 8 27 95-0

Disposable samplers | Collect samples - instead of complicated cleaning!Profitability vs. qualityWhat would be the use of samples that are contaminated with previous ones? Absolutelynothing! On the contrary, these are the most expensive samples imaginable, as they lead toincorrect results.However, high-quality cleaning of a sampler costs time and money. Cleaning is also moreoften complicated, especially for greasy, adhesive or hazardous substances.Trained personnel should not be concerned with cleaning tasks, but correct sampling – thecredo of our customers in all branches. Wholly driven by our motto: correct sampling.The cleaning methods need not be revalidated and complied with during regular audits, either.Collect samples - instead of complicatedcleaning! Disposable product - unpack, takesample, recycle! Made of environmentallyfriendly, recyclable PE or PP.No contamination with other samples, nocomplicated, time-consuming, expensivecleaning.Disposable samplers are produced underclean-room conditions, they are dustfreeand individually packed in film. Optionallyavailable as sterilised with gamma rays.123

LiquiDispoDispoPipetteViscoDispoDisposable sampler for liquids of low viscosityup to about 10,000 cP.Suitable for taking samples of liquids whichare low in viscosity.Disposable sampler for highly viscous mediaup to max 100,000 cP.Diameter 21 mmDiameter 21 mmDiameter 21 mmLiquiDispoLength mm Volume ml Material Pieces per pack Price € Quantity scale from Scale price € Item no.500 100 HDPE 20 141.60 10 134.75 5393-1120 N3500 100 HDPE/sterilized 20 191.10 10 181.85 5393-1121 N31000 190 HDPE 20 175.10 10 165.80 5393-1130 N31000 190 HDPE/sterilized 20 232.55 10 221.00 5393-1131 N3DispoPipetteLength mm Volume ml Material Pieces per pack Price € Quantity scale from Scale price € Item no.900 180 HDPE 50 359.75 5 319.90 5393-5531 N3900 180 HDPE/sterilized 50 392.90 5 349.70 5393-5532 N3ViscoDispoLength mm Volume ml Material Pieces per pack Price € Quantity scale from Scale price € Item no.500 100 HDPE 20 141.60 10 134.75 5393-3320 N3500 100 HDPE/sterilized 20 191.10 10 181.85 5393-3321 N31000 190 HDPE 20 175.10 10 165.80 5393-3330 N31000 190 HDPE/sterilized 20 232.55 10 221.00 5393-3331 N3124www.buerkle.de | info@buerkle.de | Hotline +49 (0) 76 35 8 27 95-0

PowderDispoMicroDispoZoneDispoDisposable sampler for pourable bulk goodsup to 0.5 mm particle size.Disposable sampler for pourable bulk goodsup to 2 mm particle size. Hole Ø 11 mmPowderDispo is ideal for taking a cross-sectionalsample from within a bulk powder, asa disposable sampler.Length of the sample chamber 500 mm,diameter 22 mmDiameter 21 mmFor removal of the smallest quantitiesDiameter 25 mmFor cross-section samples through alllayers of the sampleThree openingsPowderDispoTotal length mm Lance mm Volume ml Material Pieces per pack Price € Quantity scale from Scale price € Item no.620 500 100 HDPE 20 180.55 10 162.70 5393-5522 N3620 500 100 HDPE/sterilized 20 190.45 10 169.35 5393-5521 N3MicroDispoLength mm Volume ml Material Pieces per pack Price € Quantity scale from Scale price € Item no.500 5 HDPE 20 160.05 10 152.05 5393-2220 N3500 10 HDPE 20 160.05 10 152.05 5393-2240 N31000 5 HDPE 20 192.30 10 183.10 5393-2230 N31000 10 HDPE 20 192.30 10 183.10 5393-2250 N3ZoneDispoTotal length mm Lance mm Volume ml No. of openings Material Pieces per pack Price € Quantity scale from Scale price € Item no.620 500 100 3 HDPE 20 320.60 10 282.30 5393-4420 N3620 500 100 3 HDPE/sterilized 20 328.80 10 289.40 5393-4421 N3970 860 190 3 HDPE 20 324.80 10 285.80 5393-4430 N3125

SteriPlastSteriPlast sampling spadeSteriPlast – sterile disposablesamplerSteriPlast products saves timeand costs in sterile sampling.Expensive sterilization, packingand storage of samplers is notrequired. The user can focussolely on correct sampling.SteriPlast samplers facilitatequick, easy and safe samplingand prevent contamination.Removing the spade in a sterilewayCollecting the sample with thespadeBulk pricesClosing the spadeSampling spade for powder, granules, pastes. Additional closing covermakes them especially practical.Sterilised, individually packedSpade with protected sampleSteriPlast sampling spadeCapacity ml Length mm Pieces per pack Price € Quantity scale from Scale price € Item no.60 178 10 31.45 10 29.70 5378-0060 N4125 190 10 38.00 10 36.20 5378-0125 N4126www.buerkle.de | info@buerkle.de | Hotline +49 (0) 76 35 8 27 95-0

Sample spoons SteriPlastSteriPlast spatulaSampling spoon ideal for powder, granules, pastes, liquids. Polystyrol, white Sterilised, individually packedBulk pricesSpatula for powder, granules, pastes. With fixed handle, ideal fortaking samples from sacks, containers or the manufacturing process.The rigid tip allows caked surfaces to be penetrated.Total length 228 mmVolume 36 mlPolystyrole, whiteSterilised, packed separatelyBulk pricesSample spoons SteriPlastLength mm Pieces per Price € Quantity scale Scale price € Item no.packfrom125 100 31.55 10 29.10 5378-1125 N4150 100 33.60 10 31.95 5378-1150 N4SteriPlast spatulaInsertion Pieces per Price € Quantity scale Scale price € Item no.depth mm packfrom152 10 19.10 10 18.10 5378-2000 N4127

Sampling bag SteriBag | the sterilised packaging bagThe sterilised sampling bag SteriBag for samples inchemistry, pharmaceuticals, medicine, veterinary scienceand foodstuffs etc.The bags are made of Polyethylene and are thereforeexceptionally tearproof and leakproof.The SteriBag sampling bag is distinguished by its safehandling. When used according to instructions, samplesare guaranteed sterile.Integrated safety: The tab-ends are sealed in plasticfilm to prevent skin injuries.SterilisedCan be labelledLeakproofSave spaceTransparentWith practical closure to tear-openProven millions of timesBulk pricesSampling bag SteriBagCapacityModel L x W mm Pieces Price € Quantity Scale Item no.mlper packscale from price €60 without labelling area 127 x 76 500 107.10 6 101.40 5344-0060 N360 with labelling area 127 x 76 500 116.35 6 110.60 5344-0061 N3150 without labelling area 178 x 76 500 110.60 6 103.65 5344-0180 N3150 with labelling area 178 x 76 500 119.80 6 113.95 5344-0181 N3450 without labelling area 229 x 114 500 130.15 6 124.40 5344-0540 N3450 with labelling area 229 x 114 500 138.15 6 130.15 5344-0541 N3650 without labelling area 229 x 140 500 145.10 6 137.00 5344-0720 N3650 with labelling area 229 x 140 500 165.80 6 158.90 5344-0721 N3900 without labelling area 305 x 114 500 150.95 6 143.95 5344-0810 N3900 with labelling area 305 x 114 500 160.05 6 152.05 5344-0811 N31650 without labelling area 305 x 178 250 115.20 12 110.60 5344-1650 N31650 with labelling area 305 x 178 250 130.15 12 119.80 5344-1651 N3128www.buerkle.de | info@buerkle.de | Hotline +49 (0) 76 35 8 27 95-0

SteriBag StandUp sample bagNadja Tippmann, Sales Germany:“ Do you find it useful tohave both hands freewhen filling a samplebag? – We did too!”SteriBag StandUp is a sterile sample bag with a stand-up base. The special bottom unfolds as soon asthe bag is filled. This makes SteriBag StandUp stable and able to stand on its own without a separatestand or support, leaving both your hands free to take the sample and fill the bag. The wire bracket atthe closure keeps the bag open, making it easy and convenient to fill.The sample bag is the ideal space-saving, unbreakable, inexpensive and sterile replacement for bottlesand beakers.Can be used for samples available as liquids, powders, solids and pastes; suitable for foods and can befrozen.The stable standing SteriBag StandUp sample bag is easy and safe to transport.SteriBag StandUp, the sample bag for easy handling of samples.Stands stablyProtected against dischargeSterilisedWith labelling fieldSteriBag StandUp sample bagCapacity ml L x W mm Pieces per pack Price € Quantity scale from Scale price € Item no.400 229x114 500 159.55 5 151.55 5344-0400 N3600 229x140 500 166.75 5 158.40 5344-0600 N3129

SteriPlast sampling tubeSteriPlast syringeSterile sampling tube with removable handle and patented sealingcover. The lid can be opened with one hand and is then at a 90° angle.Liquid/condensate in the lid goes into an absorbing channel integratedinto the lid, nothing is lost, nothing can drip.The tightly closing sampling tube with a handle of 24 cm in lengthenables a clean sample to be placed directly in the sampling container.This mainly prevents cross-contamination.Polypropylene, blue transparentSterile, packed separatelyPatented sealing coverBulk pricesThe syringe is used to take sterile samples and store them. The sampleamount can be read off from the printed contents graduation.The syringe is supplied in a sterile package and is ready for immediateuse. The syringe can be extended to any length with additionaltubing. A Luer adapter is supplied for the 100 ml syringe.PP, transparentContents graduationSterilised, packed separatelyBulk pricesSteriPlast sampling tubeCapacity ml Dia. mm Height mm Price € Quantity Scale Item no.scale from price €90 43 80 3.06 150 2.71 6206-0101 N3SteriPlast syringeCapacity ml Pieces per Division ml Price € Quantity Scale Item no.packscale from price €50 10 1 17.05 6 15.45 5325-0060 N4100 10 2 50.95 5 43.35 5325-0100 N4130www.buerkle.de | info@buerkle.de | Hotline +49 (0) 76 35 8 27 95-0

www.buerkle.de – just a click away!Complete information around the clock –the Bürkle shop doesn’t have opening hours.Come visit our recently redesigned webpage. A new layout and additional functionswill get you where you want to go faster.Have you already got anaccount? With a useraccount you store yourdata just once - with thenext order it all goesmuch quicker.Do you already know whatyou want? Use our directorder system – the shortestroute to your wishes!And in urgent cases? With our traffic light system youcan see at a glance which products are immediatelyavailable.131

Scoop AISI 304EasyScoop Stainless steel V2A (1.4301) Sterilisable RobustWhen sampling bulk goods with a high specific weight, conventionalscoops subject the user‘s wrist to great stress. EasyScoop with itscentrally arranged inner grip is ergonomically designed and ensureseasy and safe work. As EasyScoop is considerably shorter than conventionalscoops, it is easier to take samples from narrow containers.Made of light aluminium, bright-anodisedScoop AISI 304Capacity ml Dia. mm Price € Quantity scale Scale price € Item no.from120 50 18.75 5 18.65 5370-0120 N3450 75 21.15 5 20.60 5370-0450 N31000 100 25.10 5 23.15 5370-1000 N31500 120 28.75 5 26.75 5370-1500 N32500 150 37.75 5 37.30 5370-2000 N3132EasyScoopCapacity ml Length mm Weight g Price € Item no.1500 200 325 23.15 5356-1500 N22000 300 575 30.45 5356-2000 N2www.buerkle.de | info@buerkle.de | Hotline +49 (0) 76 35 8 27 95-0

FoodScoopPharmaScoopVery stable hand scoop for various applications, particularly suitedfor the food industry. Seamless connection of scoop and hollowhandle, therefore without crevices and edges. Especially smooth,highly polished surface. Conforms to food law according to EC Stipulations.Especially sturdy modelStainless steel V2A (1.4301)With handy suspension eyeletFoodScoopCapacity ml Total L x W mm Price € Quantity Scale Item no.length mmscale from price €100 215 120 x 60 18.30 5 16.80 5371-0100 N3200 230 140 x 75 24.95 5 22.90 5371-0200 N3250 245 155 x 85 27.05 5 24.95 5371-0250 N3350 290 180 x 100 30.35 5 27.90 5371-0350 N3500 350 220 x 130 40.10 5 36.85 5371-0500 N3This sample scoop has been developed in order to meet the high requirementsof the pharmaceutical industry, such as those containedin the FDA regulations.Like all samplers for the pharmaceutical industry, they are made ofstainless steel V4A without edges, crevices or undercuts in whichsample residues could collect and contaminate subsequent samples.The highly polished inner and outer surfaces of the scoop thereforemeet all the requirements for GMP compliance in production andsampling.Stainless steel V4A (1.4401)GMP conformHighly polishedPharmaScoopCapacity ml Dia. mm Length mm Price € Item no.10 24 44 55.10 5324-0010 N240 38 70 93.30 5324-0011 N2100 50 100 126.75 5324-0012 N2500 95 140 127.30 5324-0018 N2750 95 215 131.15 5324-0013 N21100 110 235 145.10 5324-0014 N21200 125 195 149.70 5324-0015 N21700 135 230 155.45 5324-0016 N22500 185 215 185.45 5324-0017 N2133

PharmaSpoon | for ultrapure samplingSample-spoonPharmaSpoon134PharmaSpoon for taking samples of powdery substances,intermediate products and material in thepharmaceutical industry. Special materials with excellentsurface qualities must be used for this toprevent cross-contamination. Our PharmaSpoonfulfils these requirements. Made of stainless steelV4A (1.4404), surface highly polished by hand (notelectro-polished!). The excellent surface propertiesof the PharmaSpoon provide significant advantages. Possible residues are even visible in the tracesector (µg sector) The surface is easy to clean The PharmaSpoon is also suitable for sterilesamplingThe PharmaSpoon was developed by an internationallyknown pharmaceutical company inBasel, Switzerland, and its usefulness hasbeen confirmed in actual practice.Total length mm Price € Quantity scale Scale price € Item no.from650 432.05 5 345.60 5324-0001 N2Sampling spoon for withdrawing small quantities of samples. Thisspecially shaped spoon lets you reach almost every corner in a containerand prevents samples from trickling out.Made of AISI 304 (1.4301) stainless steelLargely chemical resistant (not against acids and alkalis)Sample-spoonLength mm Price € Quantity scale from Scale price € Item no.150 12.65 10 11.45 5320-0150 N4180 18.45 10 16.65 5320-0180 N4210 29.00 10 26.35 5320-0210 N4300 35.05 10 32.05 5320-0300 N4400 38.20 10 34.75 5320-0400 N4www.buerkle.de | info@buerkle.de | Hotline +49 (0) 76 35 8 27 95-0

Measuring scoopsVolumetric spoonsUniversal graduated shovel for filling and measuring of powdersand granules. For exact metering, the graduated shovel is to beoverfilled and the excess at the upper edge of the shovel is to bewiped off.PP, whiteHigh chemical-resistanceCalibrated volume when full to the brimMeasuring scoopsCapacity ml L x W mm Price € Quantity scale Scale price € Item no.from2 60 x 21 0.32 48 0.31 9614-0002 N35 82 x 27 0.38 48 0.35 9614-0005 N310 100 x 34 0.41 48 0.40 9614-0010 N325 135 x 44 0.62 48 0.56 9614-0025 N350 160 x 55 0.91 48 0.82 9614-0050 N3100 200 x 70 1.36 48 1.24 9614-0100 N3250 260 x 90 2.93 24 2.65 9614-0250 N3500 315 x 118 4.42 24 3.97 9614-0500 N31000 385 x 134 5.20 24 4.66 9614-1000 N3The capacity is printed on the scoop handle. Available as a set with8 spoons or separate in bags of 100 spoons.Polystyrene, blueRound shape, easy emptyingVolumetric spoonsModel Capacity ml Pieces per Price € Quantity Scale Item no.packscale from price €set with 8 0,5 - 50 8 6.98 10 6.35 5334-0001 N4spoonspack 0,5 100 37.00 10 33.30 5334-0005 N4pack 1 100 37.00 10 33.30 5334-0010 N4pack 2,5 100 42.10 10 37.90 5334-0025 N4pack 5 100 43.25 10 38.95 5334-0050 N4pack 10 100 43.55 10 39.15 5334-0100 N4pack 15 100 46.45 10 41.85 5334-0150 N4pack 25 100 51.30 10 46.20 5334-0250 N4pack 50 100 80.25 10 71.95 5334-0500 N4135

Plastic scoops and scrapersIron scoops are loud, they can be dented,they rust and they are heavy. Plastic scoopshave none of these disadvantages and arealso hygienic because they are made in onepiece and have a non-stick surface. Theyalso have a high chemical resistance, theyare unbreakable and, depending on the version,may be anti-static, anti-microbial, suitablefor use with food and available in differentcolours (cadmium-free) – all valuableadvantages!Depending on the version the scoops maybe anti-static, anti-microbial, suitable foruse with food and available in differentcolors (cadmium-free).The scoops and scrapers are made of polypropyleneand contain additives for differentapplications: Industry: green Foodstuffs: whiteSix products: Scraper with fixed handle Hand scoop Filling scoop, ideal for sampling 2-part shovel with D-grip 2-part shovel with T-grip 1-part shovel reduces contaminationPharmaceuticals, biotechnology, foods, feed,chemistry, industry, agriculture, fish farming,sampling, veterinary use.The shape of the food scoops correspondsto the industrial scoops on page 137.1362 51 Hand scoops for foodstuffsL x W mmTotal Weight g Price € Quantity scale from Scale price € Item no.length cm315 x 247 52,7 509 19.30 5 17.25 8300-1010 N32Filling scoops for foodstuffsScoops and scrapers forfoodstuffsPolypropylene’s easy-toclean,smooth and pore-freesurface makes these scoopsextremely suitable for thefood sector. The scoops canbe also used for boilingproducts.For foodstuffs (FDA andEU 90/128)W x D x L mmTotal Weight g Price € Quantity scale from Scale price € Item no.length cm110 x 150 x 250 25 90 5.20 5 4.77 8300-5010 N3138 x 187 x 310 31 187 8.50 5 7.80 8300-5011 N3167 x 230 x 355 35 289 9.45 5 8.40 8300-5012 N35 1-part shovels for foodstuffsHandle W x D x L mm Total Weight g Price € Quantity scale from Scale price € Item no.length cmD 279 x 362 x 1107 111 1564 72.50 5 64.50 8300-0010 N3D 347 x 410 x 1100 110 1882 76.10 5 67.90 8300-0011 N33 2-part shovel for foodstuffsHandle W x D x L mm Total length Weight g Price € Quantity scale from Scale price € Item no.cmT 247 x 315 x 966 97 1040 46.05 5 41.30 8300-2010 N34 Scrapers for foodstuffsL x W mm Weight g Price € Quantity scale from Scale price € Item no.205 x 75 44 4.78 5 3.80 8300-4011 N3250 x 100 80 6.10 10 4.88 8300-4010 N3www.buerkle.de | info@buerkle.de | Hotline +49 (0) 76 35 8 27 95-0

Plastic scoops and scrapers1 24Scoops and scrapers for industryWith anti-static additive, ideal for robust use in chemistry and industry. Polypropylene has a high resistanceto chemicals and temperatures. The scoops are unbreakable, easy to clean and light-weight.Anti-static1Hand shovel for industryL x W mm Total length cm Weight g Price € Quantity scale from Scale price € Item no.315 x 247 51,5 509 22.05 5 20.05 8300-1003 N3350 x 257 58,7 810 34.65 5 31.45 8300-1001 N323Filling scoops for industryW x D x L mm Total length cm Weight g Price € Quantity scale from Scale price € Item no.110 x 150 x 250 25 90 5.20 10 4.77 8300-5001 N3138 x 187 x 310 31 187 8.10 5 7.35 8300-5002 N3167 x 230 x 355 35 289 9.45 5 8.40 8300-1002 N32-part shovel for industryHandle W x D x L mm Total length cm Weight g Price € Quantity scale from Scale price € Item no.T 247 x 315 x 966 97 1004 46.05 5 41.30 8300-2001 N3D 257 x 350 x 1045 104,5 1280 58.90 5 51.90 8300-3006 N334Scrapers for industryL x W mm Weight g Price € Quantity scale from Scale price € Item no.205 x 75 44 4.78 10 3.80 8300-4001 N3250 x 100 80 6.10 10 4.88 8300-4002 N3137

BeefSteaker | as per HACCPIceSampler | for frozen, pasty materialsFor taking bacteriological samples from the surfaces of dead animalsin slaughterhouses and in butchers‘ shops. (cattle, pigs, sheep,goats and horses). The BeefSteaker is used to cut out a 25 mmround sample from the animal‘s skin. The stainless steel (1.4404)cutter allows the sample to be cut out easily.The BeefSteaker can also be used for other sampling purposes (histology,medicine, food and semi-luxury articles, cheese factories, agriculture).The BeefSteaker can be steam-sterilised or flamed. A hole in thecrown prevents air compression and is used for ejecting the sample.BeefSteakerDia. mm Price € Item no.25 172.75 5388-1000 N4AccessoriesDescription Price € Item no.Transport case BeefSteaker 9.80 3600-0101 N3Developed for sampling from frozen, highly viscous, paste-like materialssuch as ice-cream and similar substances. The drill-shapedcutter screws itself into the frozen goods independently when beingrotated.The collection cylinder can easily be detached via a bayonet connection.The sample is then available and can be removed.Stainless steel V4A (1.4404), electro-polishedSterilisableEasy cleaningCollection cylinder 38 mm ØIceSamplerLength mm Volume ml Price € Item no.300 50 369.55 5339-0300 N2550 50 393.75 5339-0550 N21050 50 417.80 5339-1050 N2AccessoriesDescription Price € Item no.Transport case IceSampler 10.85 3600-0021 N3138www.buerkle.de | info@buerkle.de | Hotline +49 (0) 76 35 8 27 95-0

Ice borer | for deep-frozen and semi-solid substancesFor deep-frozen products in the food industry andsemi-solid substances. The sharp sawing crown of thevery robust hollow borer rapidly cuts into the sample.A cylindrical sample (cross-sectional sample) of up to20 cm can be cut out.Ice borer consisting of three parts: Borer, borer headfor use in conventional drills and rod for pressing thecylindrical sample out of the borer head.Ice borerStainless steel V4A (1.4404)Sterilisable20 cm boring depthInner dia. mm Outer dia. mm Drilling depth mm Price € Item no.16 21 200 237.15 5323-0200 N450 54 200 385.55 5323-2010 N4139

Soil sampler GeoSampler | soil samplingSoil sampler Puerkhauer | soil samplingSampler for light soils, meadows and lawns. The foot bar of model5350-5006 makes work much easier.Depth graduation 10 cm divisionsStainless steelVery robust sampler for heavy and stony soils. Model 5350-5018 hasa conically-tapered 60 cm tip which makes it much easier to extractthe driven-in sampler. Ideal for N-min sampling 0 – 90 cm.Depth graduation 10 cm divisionsAttachable handle, with non-slip plastic gripsReinforced impact headStainless steelSoil sampler GeoSamplerModelwith footbarwithoutfoot barTotallengthcmFlutelengthmmOuterdia. mmInnerflute dia.mmWeight g Price € Item no.81 300 20 14 1500 89.80 5350-5006 N260 300 17,2 12,6 550 70.25 5350-5003 N2Soil sampler PuerkhauerTotallengthcmFlutelengthmmOuterdia. topmmOuterdia. bottommmInnerflute dia.mmWeight g Price € Item no.81 600 20 20 13 2400 223.35 5350-5012 N2117,5 1000 28 25 18 3800 506.45 5350-5018 N2140www.buerkle.de | info@buerkle.de | Hotline +49 (0) 76 35 8 27 95-0

Mole with handle and bar1Very robust model with specially hardened forgeddrill bits. For determining soil properties, moistureand structure. The shape of the Mole’s drill bits ensuresminimum friction when drilling and removingthe Mole from the ground. This reduces physical effortto a minimum.The Mole has different components. Handle with 75cm rod, extension rod 100 cm if necessary and one ofseven available drill bits, each of which is designedfor a particular soil type. The components can be combinedwithout any problems. Extension rods can extendthe working depth of the Mole down to 5 m.Please order drill bits seperately!23Drill bits for moleThere are various drill bits for Mole, which are each designed for very specific soilproperties:Clay and damp soilWith narrow side panels for minimum soil friction/resistance. As wet soils areusually very cohesive, the soil still adheres to the bit very well.SandWith broad side panels and therefore a large retention capacity for the sand.Coarse sandWith extra broad side panels enclosing even more of the bit so that even coarsesandy soils and very dry soils are retained.CombinationRetains both strongly cohesive and less cohesive soils.RiversideVery suitable for drilling in hard, encrusted soils and soils mixed with fine gravel.The drill cutters project from the drill itself, so that friction is greatly reduced.Gravel drillWith slightly rounded, oblique scoops which pull themselves downward in thegravel. Any stones present are clamped between the drill sides. Finer soil material(coarse sand with fine gravel) is retained in the drill bit.Stone catcherThe stone catcher is used to collect and remove stones that prevent proper samplingwith one of the other drill bits.A B C D E F GMole with handle and barModel Length cm Price € Item no.1 handle with rod, 75 150.45 5350-1005 N4without drill bitAccessoriesDescription Price € Item no.2 Extension for mole 70.25 5350-1010 N4Transport case L x W 121 x 22,5 cm 88.80 3600-2120 N43Drill bits for moleModel Price € Quantity scale from Scale price € Item no.A clay and wet soils 99.00 5 93.30 5350-1015 N4B sand 118.60 5 113.05 5350-1020 N4C coarse sand 172.45 5 160.15 5350-1025 N4D combination 112.85 5 106.00 5350-1030 N4E riverside 172.45 5 157.90 5350-1035 N4F gravel drill 145.30 5 139.25 5350-1040 N4G stone catcher 130.15 5 124.40 5350-1045 N4141

MiniThermSnowPack dry ice machineThis immersion/penetration thermometer is suitablefor measuring the temperature in gases, soft or powderysubstances and liquids.NEW: The mini thermometer in wateproof design cansimply be rinsed under flowing water or even cleanedin a dishwasher. Easy and quick battery replacement, battery included Sensor directly in the measuring tip Handy Many usesMiniThermModel MeasuringLength Dia. IP Code Price € Item no.range°Cmm mmstandard-50 to+150133 4 41 34.90 5384-0011 N2waterproof142-20 to+230120 4 67 51.50 5384-0012 N2SnowPack enables you to obtain a - 79 °C dry ice tablet weighing 50 or 250 gwithin a few moments, without complicated technology and without electricity!You can therefore obtain low-cost cooling to very low temperatures at any timeyou like.SnowPack is often used in hospitals, universities, schools, institutes, laboratories,in the chemical industry and in materials testing facilities.Examples of use: Lowering the temperature in cooling baths or cold traps, precoolingtissue samples, ensuring safe transport or embedding biological substances,freezing blood and tissue samples, studies in chemistry, physics and materialstechnology, etc.Dry ice is easy to handle, odourless and flavourless. The SnowPack dry ice machinecan be installed on any commercial CO2-bottle with a standpipe valve (thread W21.80 x 1/14” according to DIN 477 No. 6). These often exist in many productionfacilities and laboratories anyway. If this is not the case, a bottle can be rented fora small price from a local specialist gas distributor.For more info see page 245.SnowPack dry ice machineModel Tablet dia. x Weight g Gas escape Tablets per 22 Price € Item no.H mmtime ca. min kg bottleSnowPack 50 50 x 30 50 0,5 approx. 90 185.45 9805-0030 N4SnowPack 250 80 x 60 250 1 approx. 16 227.95 9805-0200 N4www.buerkle.de | info@buerkle.de | Hotline +49 (0) 76 35 8 27 95-0

Sample containers | for neat, safe and reliable transport from sampling to analysisSample boxes, asepticSample box with patented closure.The lid can be opened withone hand and its hinge angle is90°. Liquid/condensate in the lidruns into an absorbing grooveintegrated in the lid, nothing islost, nothing can drip.The box is completely tight. Nocrevices, therefore easy to filland can be emptied without residues.The box is produced underaseptic conditions. It is autoclavableand suitable for deepfreezing.PP, transparentAsepticWith area for labelling andgraduationSample container, roundSample box with screw lid. Idealfor taking samples and transport.Available in two material qualities:highly transparent PP forpowder, pastes, liquids, or PFA forsuper pure collection of samples.Emptying without residues becausethere are no crevices.PP or PFA autoclavableThick sidesSample boxes, asepticSample tubes aseptic, with sealThe sample boxes are manufactured in the cleanroom and sealed inthe injection moulding machine at over 100°C, so that the insides ofthe boxes are virtually sterile. This method makes the boxes absolutelyleakproof, as the cap and box adapt ideally to each other duringthe cooling process. No crevices, therefore easy to fill and canbe emptied without residues. With tamper-evident seal which guaranteesvirtual sterility until the first opening. After opening, it canbe sealed again with a practical seal. PP, transparent Aseptic With graduation SterilisableCapacity ml Height mm Dia. mm Model Price € Quantity scale from Scale price € Item no.50 78 31 with labeling area and graduation 0.30 650 0.28 6206-0060 N390 80 43 graduated to 80ml 0.35 350 0.32 6206-0100 N3300 88 75 graduated 0.93 240 0.86 6206-0300 N3Sample container, roundMaterial Capacity ml Inner dia. mm Outer dia. mm Height with Price € Quantity scale Scale price € Item no.cap mmfromPP 60 35 50 93 7.00 10 6.10 6203-0060 N3PP 180 50 65 119 10.10 10 8.85 6203-0180 N3PFA 90 50 65 65 52.60 10 47.95 6205-0090 N3PFA 180 50 65 119 68.10 10 60.40 6205-0180 N3Sample tubes aseptic, with sealCapacity ml Height mm Dia. mm Price € Quantity scale from Scale price € Item no.55 84 29 0.32 90 0.30 6207-0055 N3340 119 63 0.58 90 0.52 6207-0340 N3143

Tubes with screw capSample beaker with coverShapely packing container with screw cap. Emptying without residuesbecause there are no crevices, cost-effective.PP, whiteSterilisableSample beaker with liquid-tight red screw-on cover. The samplebeakers are aseptic and suitable for use with food. The beakers canbe autoclaved without the cover. PP beaker, LDPE cover Temperature resistance of beaker -20°C/+120°C, cover-80°C/+75°C AsepticTubes with screw capCapacity ml Dia. mm Height mm Price € Quantity Scale Item no.scale from price €12 25 31 0.20 100 0.18 6214-0012 N325 31 40 0.31 100 0.26 6214-0025 N360 41 56 0.56 100 0.45 6214-0060 N390 52 52 0.62 100 0.51 6214-0090 N3125 52 67 0.71 100 0.56 6214-0125 N3250 68 79 1.16 100 0.91 6214-0250 N3625 90 113 1.26 70 1.01 6214-0600 N31000 102 129 3.11 80 2.42 6214-1000 N3Sample beaker with coverCapacity ml Dia. mm Height mm Price € Quantity Scale Item no.scale from price €125 52 74 0.91 380 0.73 7103-0125 N3144www.buerkle.de | info@buerkle.de | Hotline +49 (0) 76 35 8 27 95-0

Aluminum bottle | light, unbreakable, seamlessSealable wide-necked bottlesThe aluminium bottle is particularly suited for storing, transport orsending substances and reference samples which have to be storedcompletely unaltered. Other properties: can be completely emptiedwithout residues, odour-neutral, impervious to light, rustproof.Sturdy bottle with sealing eyelets on the screw cap and the bottle.Particularly suited for sending samples. Seals provide increasedsample authenticity. Easy to fill due to wide opening. Particularlysuitable for viscous media, powder, granules and pastes.Pure aluminium (material AL 99.5)With tamper-evident screw cap made of PP with aluminium innersealSuitable for foodWith UN approval (for 60-1200 ml)HDPELeakproofEasy to fill due to wide-necked openingAluminum bottleCapacitymlDia.mmHeightwith capmmUN approval Price € QuantityscalefromScaleprice €Item no.38 35 70 no 1.32 387 1.21 0327-0038 N360 40 88 1B1/X/250 1.45 304 1.31 0327-0060 N3120 57 97 1B1/X/250 1.73 143 1.57 0327-0120 N3300 57 160 1B1/X/250 2.31 149 2.26 0327-0300 N3600 74 192 1B1/X/250 3.36 84 3.27 0327-0600 N31200 88 248 1B1/X/250 3.97 130 3.80 0327-1200 N3Sealable wide-necked bottlesCapacity Container Neck dia. Height with Price € Quantity Scale Item no.ml dia. mm inside mm cap mmscale from price €250 64 26,5 118 2.19 50 1.89 0322-0250 N3500 78 40 147 2.26 50 1.98 0322-0500 N31000 100 50 186 4.62 50 3.85 0322-1000 N32000 120 50 230 5.25 50 4.55 0322-2000 N3AccessoriesDescription Price € Item no.SampleSafe seal, red, 100 pieces 65.75 5399-2902 N2145

Table of contents Containers148 – 152 Narrow-necked bottles152 – 155 Wide-necked bottles156 – 160 Wash bottles and dropping bottles162 – 163 Aluminium bottles164 – 169 Boxes167 – 169 Sample containers170 – 176 Canisters, wide-mouth containers177 Storage/stacking containers175 – 181 Tubs, big containers182 – 183 Safety containers184 – 185 Packaging buckets, packaging bagswww.buerkle.de | info@buerkle.de | Hotline +49 (0) 76 35 8 27 95-0

ContainersBottles, tubes, jerry cans

Narrow-necked bottles for universal use | easy to handle and squeeze, reliable outflowUniversal bottles forstoring, packing, lab, takingsamples, samplingand transport of liquids.With screw capLDPE, transparentBulk pricesNarrow-necked bottles for universal useCapacity ml Container dia. mm Height with cap mm Neck dia. inside mm Thread dia. mm Price € Quantity scale from Scale price € Item no.10 26 48 9 14 0.48 100 0.36 0302-0010 N320 32 58 9 14 0.53 100 0.41 0302-0020 N330 35 64 9 14 0.62 100 0.50 0302-0030 N350 40 86 13 18 0.81 100 0.59 0302-0050 N3100 45 106 13 18 0.89 100 0.61 0302-0100 N3200 58 134 13 18 1.50 25 1.16 0302-0200 N3250 61 140 18 25 1.55 50 1.47 0302-0250 N3500 75 173 18 25 2.31 50 1.77 0302-0500 N31000 95 213 21 28 3.50 50 2.57 0302-1000 N32000 120 263 21 28 6.20 50 4.66 0302-2000 N33000 139 306 24 32 10.10 20 7.60 0302-3000 N35000 163 360 31 40 13.95 10 12.80 0302-5000 N3148www.buerkle.de | info@buerkle.de | Hotline +49 (0) 76 35 8 27 95-0

Round bottlesTall-form bottles1 21 Round bottleswith snap closureHandy round bottles with snapactionhinged lid, especiallysuited for cosmetic liquids,emulsions, creams and oils.Sampling possible per portion. HDPE transparent Snap closure with hole Ø 3mm Cost-effective and shapely2 Round bottlewith screw capHandy round bottle with screwcap, especially suited for cosmeticliquids, emulsions, creamsand oils.Bulk prices3 Tall-form bottlesUniversal bottle for storing, packing, lab, sampling.3LDPE, transparentLeakproofWith screw capMatching dropper cap is availableas accessory41 Round bottles with snap closureCapacity ml Height with Thread dia. Price € Quantity Scale Item no.cap mm mmscale from price €100 115 22 0.91 50 0.83 0308-0100 N3250 143 22 1.15 50 1.03 0308-0250 N3500 182 25 1.46 50 1.40 0308-0500 N31000 221 25 2.15 72 1.96 0308-1000 N32 Round bottles with screw capCapacity ml Height with Thread dia. Price € Quantity Scale Item no.cap mm mmscale from price €100 115 22 0.84 50 0.74 0308-0110 N33CapacitymlTall-form bottlesDia. mm HeightmmNeck dia.insidemmThreaddia.mmPrice€QuantityscalefromScaleprice €Item no.100 45 98 13 18 0.89 100 0.68 0314-0100 N3250 61 128 18 25 1.40 50 1.05 0314-0250 N3500 77 162 18 25 2.18 50 1.65 0314-0500 N31000 95 198 21,6 28 3.26 50 2.36 0314-1000 N3AccessoriesDescription Price € Item no.4 Dropper cap fi ts for thread dia. 18 mm 0.28 0300-3018 N34 Dropper cap fi ts for thread dia. 25 mm 0.36 0300-3025 N34 Dropper cap fi ts for thread dia. 28 mm 0.39 0300-3028 N3149

Narrow-necked square bottleNarrow-necked square bottle, screw capBulk pricesCost-effective square bottle for packing and storing of liquids, powdersand granules.HDPE, transparent, shatterproofSpecial labelling area for labels or manual letteringLeakproofNarrow-necked square bottleCapacitymlL x WmmHeightwithcapmmNeckdia.insidemmThreaddia.mmPrice €QuantityscalefromScaleprice €Item no.20 27 x 27 51 13 18 0.44 100 0.41 0331-0020 N350 35 x 35 77 13 18 0.55 100 0.53 0331-0050 N3100 46 x 46 78 17,5 25 0.68 100 0.61 0331-0100 N3Cost-effective square bottle for packing and storing of liquids.HDPE, transparent, shatterproofSpecial labelling area for labels or manual letteringSuitable as a disposable bottleLeakproofWith screw capNarrow-necked square bottle with screw capBulk pricesCapacityL x W Height with Thread Neck dia. Price Quantity Scale Item no.ml mm cap mm dia. mm inside mm € scale from price €100 41 x 34 113 18 13 0.59 100 0.55 0332-0100 N3250 51 x 44 160 25 17,5 0.86 50 0.80 0332-0250 N3500 68 x 53 182 25 17,5 1.04 50 0.96 0332-0500 N31000 90 x 64 230 25 17,5 1.66 50 1.50 0332-1000 N3AccessoriesDescription Price € Item no.Dropper cap fi ts for thread dia. 18 mm 0.28 0300-3018 N3Dropper cap fi ts for thread dia. 25 mm 0.36 0300-3025 N3150www.buerkle.de | info@buerkle.de | Hotline +49 (0) 76 35 8 27 95-0

Laboratory bottles made of PETLaboratory bottles with graduation PCFor use in laboratories and chemical handling areas. Good productpresentation due to crystal-clear PET. Space-saving and absolutelyleakproof. Idea for storing and packing liquids.High-quality laboratory bottle made of polycarbonate for universaluse. Shatterproof at room temperature. Easily operated screwthread, safe pouring, with moulded-in raised contents graduation.PET crystal-clearWith tamper-proof closureWith moulded-in raised graduationPolycarbonate crystal-clear, autoclavableWith screw cap PPGuaranteed leakproofWith moulded-in raised graduationLaboratory bottles made of PETCapacity ml L x W x H Neck dia. Price € Quantity Scale Item no.mm inside mmscale from price €250 58 x 58 x 28 1.40 112 1.27 0370-0250 N2145500 70 x 70 x17528 1.88 82 1.69 0370-0500 N2Laboratory bottles with graduation PCCapacityPrice €mlL x W mm HeightwithcapmmNeckdia.insidemmThreaddia.mmQuantityscalefromScaleprice €Item no.125 55 x 55 109 28 37 6.70 6 5.90 0316-0125 N2250 61 x 61 145 28 37 8.30 6 7.70 0316-0250 N21000 95 x 95 218 28 37 19.65 4 17.80 0316-1000 N22000 116 x 116 275 39 53 45.60 6 41.50 0316-2000 N2151

Narrow-neck reagent bottleWide-neck reagent bottleBulk pricesUniversal bottles for storing, packing, taking samples, sampling andtransport of liquids. HDPE, transparent PP tamper-evident screw cap, blueThe reagent bottle is particularly suited for storing, packing, takingsamples, sampling and transport of granules and paste-like media. HDPE, transparent PP tamper-evident screw cap, blue UN approval for bulk goods (see page 178)Narrow-neck reagent bottleCapacity ml L x W mm Height capless mm Thread dia. mm Neck dia. inside mm Price € Quantity scale from Scale price € Item no.100 45 x 45 108 32 17 1.50 100 1.39 0340-0100 N3250 60 x 60 136 32 17 1.83 50 1.77 0340-0250 N3500 74 x 74 170 32 17 2.15 50 2.06 0340-0500 N31000 85 x 85 221 32 17 2.78 72 2.65 0340-1000 N32500 122 x 122 272 45 28 6.80 27 6.10 0340-2500 N3Wide-neck reagent bottleCapacity ml L x W mm Height capless Thread dia. mm Neck dia. inside UN approval Price € Quantity scale Scale price € Item no.mmmmfrom50 36 x 36 89 28 21 no 1.48 700 1.36 0342-0050 N3100 45 x 45 101 32 24 UN3H1/X0.3 1.34 582 1.22 0342-0100 N3250 59 x 59 130 45 35 UN3H1/X0.8 1.95 273 1.75 0342-0250 N3500 75 x 75 162 54 43 UN3H1/X1.5 2.26 124 2.08 0342-0500 N3750 83 x 83 188 54 43 UN3H1/X2.5 2.28 90 2.14 0342-0750 N31000 85 x 85 214 54 43 UN3H1/X2.5 2.32 81 2.25 0342-1000 N31500 108 x 108 209 80 69 UN3H1/X4 3.69 42 3.40 0342-1500 N32500 122 x 122 260 80 69 UN3H1/X5 4.86 27 4.32 0342-2500 N34000 142 x 142 294 80 69 UN3H1/X5.5 6.10 15 5.55 0342-4000 N3152www.buerkle.de | info@buerkle.de | Hotline +49 (0) 76 35 8 27 95-0

Wide-necked bottle | easy to fill and clean, compact form, unbreakableSturdy bottle with wide-necked opening and screwcap. Particularly suitable for viscous media, powder,granules and pastes. Leakproof.Bulk pricesWide-necked bottleLDPE or PPLDPE coloured brown for light-sensitive liquids.Individual customer-specific printing possible -please ask us!Material Capacity ml Colour Dia. mm Height mm Neck dia. inside Thread dia. mm Price € Quantity scale Scale price € Item no.mmfromLDPE 50 transparent 40 80 24 32 0.94 100 0.75 0318-0050 N3LDPE 100 transparent 48 95 24 32 1.23 100 0.92 0318-0100 N3LDPE 200 transparent 59 114 30 40 1.67 384 1.37 0318-0200 N3LDPE 250 transparent 64 127 31 40 1.60 50 1.23 0318-0250 N3LDPE 500 transparent 77 158 39 50 2.60 50 1.98 0318-0500 N3LDPE 750 transparent 88 176 39 50 3.85 98 3.06 0318-0750 N3LDPE 1000 transparent 94 207 50 65 4.32 50 3.35 0318-1000 N3LDPE 1500 transparent 108 232 50 65 6.20 46 4.99 0318-1500 N3LDPE 2000 transparent 120 252 50 65 6.70 50 5.05 0318-2000 N3PP 100 transparent 48 95 24 32 1.30 100 0.97 0319-0100 N3PP 250 transparent 64 127 31 40 1.78 50 1.32 0319-0250 N3PP 500 transparent 77 158 39 50 2.93 100 2.20 0319-0500 N3PP 1000 transparent 94 207 50 65 4.88 50 3.69 0319-1000 N3LDPE 250 brown 64 127 31 40 2.06 50 1.55 0320-0250 N3LDPE 500 brown 77 158 39 50 3.50 50 2.57 0320-0500 N3LDPE 1000 brown 94 207 50 65 6.10 50 4.86 0320-1000 N3153

Wide-necked square bottleMulti-Bottles with graduationCost-effective square bottle for packing and storing of liquids, powdersand granules.Bottle for universal use. The medium-sized bottle opening ensuresgood filling and safe pouring.HDPE, transparent, shatterproofSpecial labelling area for labels or manual letteringLeakproofWide-necked square bottleCapacitymlL x WmmHeightwithcapmmNeckdia.insidemmThreaddia.mmPrice €QuantityscalefromScaleprice €Item no.250 59 x 59 110,5 30 50 2.18 100 1.79 0338-0250 N3500 68 x 68 146 30 50 2.67 100 2.23 0338-0500 N31000 90 x 90 170 50 65 2.60 50 2.40 0338-1000 N3 Bottle HDPE, lid PP Embossed contents scale Absolutely leakproof With screw capMulti-Bottles with graduationCapacitymlContainerdia.mmHeight Neckcapless dia.mm insidemmDivisionmlThreaddia.mmPrice €Bulk pricesQuantityscalefromScaleprice €Item no.100 46 99,5 19 25 25 1.01 20 0.93 0301-0100 N3250 61 129,5 24 50 28 1.43 10 1.31 0301-0250 N3500 76 161 30,8 50 40 2.28 10 2.10 0301-0500 N31000 97 203 39,2 100 50 3.74 4 3.45 0301-1000 N3154www.buerkle.de | info@buerkle.de | Hotline +49 (0) 76 35 8 27 95-0

Rectangular bottle PP transparentSealable wide-necked bottlesPolypropylene bottle, highly transparent and polished. High-qualitydesign, almost identical to glass and therefore ideally suited forpresentation purposes.Highly transparentEspecially lightAutoclavableChemically resistantSturdy bottle with sealing eyelets on the screw cap and the bottle.Particularly suited for sending samples. Seals provide increasedsample authenticity. Easy to fill due to wide opening. Particularlysuitable for viscous media, powder, granules and pastes.HDPELeakproofEasy to fill due to wide-necked openingRectangular bottle PP transparentCapacitymlL x WmmHeightcaplessmmNeckdia.insidemmThreaddia.mmPrice €QuantityscalefromScaleprice €Item no.100 46 x 46 108 18,6 32 2.91 100 2.67 0343-0100 N3250 60 x 60 136 18,6 32 3.49 50 3.22 0343-0250 N3500 75 x 75 169 28,6 45 4.88 50 4.50 0343-0500 N31000 94 x 94 204 28,6 45 6.10 64 5.50 0343-1000 N3Sealable wide-necked bottlesCapacitymlContainerdia. mmNeck dia.insidemmHeightwith capmmPrice €QuantityscalefromScaleprice €Item no.250 64 26,5 118 2.19 50 1.89 0322-0250 N3500 78 40 147 2.26 50 1.98 0322-0500 N31000 100 50 186 4.62 50 3.85 0322-1000 N32000 120 50 230 5.25 50 4.55 0322-2000 N3AccessoriesDescription Price € Item no.SampleSafe seal, red, 100 pieces 65.75 5399-2902 N2155

Bottle with child safety lockSpray bottle Turn ‘n’ Spray | with overhead valveNarrow-neck bottles with child-safe, press and turnsafety closure. The cover also has a tamper-proof ringwhich makes it evident when the bottle has beenopened for the first time.156Ideal for storing hazardous substancesHDPE, transparentPP child-safe, screw-on tamper-proof closureBottle with child safety lock, narrow neckCapacityL x W Height Price € QuantityScale Item no.ml mm caplessmmscalefromprice €100 45 x 45 108 2.09 100 1.98 0341-0100 N3250 60 x 60 136 2.36 100 2.23 0341-0250 N3500 74 x 74 170 2.66 50 2.52 0341-0500 N31000 85 x 85 221 3.26 72 2.86 0341-1000 N3Spraying over your head is not possible with standard spray bottles. As soon asthe suction tube is no longer immersed in liquid, you can’t spray any more.No so with our overhead spray bottle Turn’n’Spray. It features a special technologythat allows you to spray from any position. That means you can spray practicallyand conveniently from any direction and reach hard-to-access places easily andwithout straining.The high-quality, refillable quality spray bottle can be used again and again.Uninterrupted spraying, even over your headParts in contact with media made of PP, PE, silicon and stainless steelNozzle diameter 0.6 mm, nozzle is continuously adjustableAmount sprayed per stroke: 1.2 ml ± 0.1Spray bottle Turn ‘n’ SprayCapacity ml Height with Neck dia. Price € Quantity scale Scale price € Item no.cap mm inside mmfrom250 220 18 6.75 180 5.75 0309-0002 N4500 240 18 7.35 80 6.40 0309-0005 N41000 295 17,5 7.75 50 6.85 0309-0010 N4www.buerkle.de | info@buerkle.de | Hotline +49 (0) 76 35 8 27 95-0

Spray bottleSpray bottle with pump vaporizerPressureless spray bottle made of LDPE with long-life hand pump.The functioning of each individual sprayer is tested during manufacture.Areas of application: Industry, laboratories, production, leisure,household. Suitable for agricultural pesticides and detergents.Spray bottles with pump vapouriser and safety cap for the pump.Liquids can be finely vapourised at the push of a button in an environmentallycompatible way. The transparent bottles make identificationof contents easy. The protective cover prevents unintentionalpressing of the pump and acts as a dust cover.Media-contacting parts PP, PE and stainless steelNozzle 0.6 mm diameter, nozzle steplessly adjustableSpray volume per stroke: 1.2 ml ± 0.1Patented venting valveBottle made of HDPE, spray pump made of PP and stainlesssteelSpray bottleCapacity ml Height with Neck dia. Price € Quantity Scale Item no.cap mm inside mmscale from price €250 220 18 4.77 180 4.27 0309-1025 N4500 240 18 5.40 80 4.83 0309-1050 N41000 295 17,5 5.55 50 5.10 0309-1100 N4Spray bottle with pump vaporizerCapacity ml Dia. mm Height with Price € Quantity Scale Item no.cap mmscale from price €20 28 85 1.93 100 1.71 0309-3002 N350 35 110 1.84 100 1.60 0309-3005 N3100 37 161 1.29 100 1.22 0309-3100 N3250 50 222 1.53 100 1.42 0309-3025 N3157

Pressure atomizerWash bottleRobust industrial quality for disinfection, cleaning, plant protection, thin layerchromatography, technical and sanitary use. The hand pump is used to produce apressure of up to 4 bar in the container. Spraying can then take place by pressinga button.Media-contacting parts PP, PE, glass-fibre-reinforced PA, V2A, FKMBottle made of HDPENozzle diameter 0.6 mmAdjustable spray jetGraduation up to 1500 mlTemperature max. 30 °CSpraying lance extension 30 cm available as accessoryPressure atomizerCapacity ml Container Height with Neck dia. Price € Quantity Scale price € Item no.dia. mm cap mm inside mmscale from1500 142 315 45 31.85 10 28.50 0309-0100 N4AccessoriesDescription Price € Item no.Spray lance for pressure atomiser 19.80 0309-0101 N4The swan-neck jet produces a fine, straight spray withno lateral spatter. Dangerous lateral spatter does notoccur.LDPETransparentImmersion tube can be pulled upWash bottleCapacitymlDia.mmHeightmmPrice €QuantityscalefromScaleprice €Item no.100 45 200 1.37 100 1.26 0310-0010 N3250 61 225 1.86 100 1.72 0310-0025 N3500 75 270 2.42 100 2.21 0310-0050 N31000 98 315 3.97 50 3.62 0310-0100 N3158www.buerkle.de | info@buerkle.de | Hotline +49 (0) 76 35 8 27 95-0

Wide-necked wash bottleSafety wash bottleThe vapour-permeable membrane reliablyprevents leaking of the contents.Spray bottle with medium overprint as well as hazard and safety instructions(health statements/physical statements) based on theGHS system with substance name in German, English, French andSpanish, GHS pictograms and CAS number.Safe filling due to wide-necked opening 39 mm neck diameterLDPE yellow transparent with light protectionContents 500 mlIf the room temperature increases, or the sun shines into the lab,conventional wash bottles will drip because of the increased innergas pressure. The venting valve ensures that the excess gas pressurecan escape and dripping is prevented. With patented, leakproofventing valve, contents cannot leak when bottle has fallen over aswith wash bottles with ball valve or venting hole. Safe filling due to wide-necked opening 39 mm neck diameter Permanent print according to GHS with substance name in German,English, French and Spanish, GHS pictograms and CASnumber. LDPE yellow transparent with light protection Contents 500 mlWide-necked wash bottlePrint Colour Price € Quantity Scale Item no.scale from price €without label - neutral yellow 6.55 100 6.00 0310-3050 N3Distilled water transparent 6.90 100 6.30 0310-3051 N3Methanol green 7.35 100 6.30 0310-3052 N3Ethanol orange 7.35 100 6.30 0310-3053 N3Isopropanol blue 7.35 100 6.30 0310-3054 N3Acetone red 7.35 100 6.30 0310-3055 N3Safety wash bottlePrint Price € Quantity scale Scale price € Item no.fromwithout label - neutral 8.50 12 7.70 0310-2056 N3Distilled water 8.50 12 7.70 0310-2050 N3Methanol 8.50 12 7.70 0310-2052 N3Ethanol 8.50 12 7.70 0310-2054 N3Isopropanol 8.50 12 7.70 0310-2055 N3Acetone 8.50 12 7.70 0310-2051 N3159

Dropping bottles | for controlled dosing drop by dropDrop-BoyDropping bottles are particularly suitable for liquids which must be dispensed insmall amounts, drop by drop or as a fine jet.160Cut off dropper tip before first useCan be reclosed using the captive cap providedLDPECaptive cap and dropper cap PEDropping bottlesCapacitymlContainerdia. mmHeightwith capmmNeck dia.inside mmThreaddia. mmPrice €Quantityscale fromBulk pricesScaleprice €Item no.10 26 76 9 14 0.49 100 0.46 0306-0010 N320 32 88 9 14 0.54 100 0.52 0306-0020 N330 35 96 9 14 0.65 50 0.59 0306-0030 N350 40 116 13 18 0.82 50 0.78 0306-0050 N3100 45 136 13 18 0.90 25 0.86 0306-0100 N3250 61 170 18 25 1.57 25 1.50 0306-0250 N3500 75 204 18 25 2.33 20 2.22 0306-0500 N31000 95 248 21 28 3.50 10 3.36 0306-1000 N3Bottle with drop dispenser and separate screw cap.Cut off dropper tip before first use.ReclosablePrecise drop dosingDrop-BoyCapacitymlDia.mmHeightcaplessmmPrice €QuantityscalefromScaleprice €Item no.10 24 50 0.59 100 0.54 0307-0010 N325 31,3 64,5 0.74 100 0.68 0307-0025 N350 40 77 0.87 100 0.78 0307-0050 N3www.buerkle.de | info@buerkle.de | Hotline +49 (0) 76 35 8 27 95-0

UN-BottleBottle carrierBottle carrierFor 6 bottles up to max. 95 mm ØHDPEBottle carrier boxFor 8 bottles up to max. 95 mmØ. With closed floor which canbe used as spill trough.This bottle reduces packaging costs! UN tested and approved. Bottlemade of HDPE, leakproof, complete with PR tamper-evident closurewith PTFE seal. The bottles are excellent for packaging purposes,sampling, sending samples, storage and shipping via the postalservice.HDPEInside measurements: Length390 mm, width 110 mmSuitable for foodAbsolutely leakproofWith UN approval for liquids (see page 178)TransparentBell-shaped caps with or without degassing on request.UN-BottleCapacitymlHeightcaplessmmNeck dia.insidemmUN approval Price € QuantityscalefromScaleprice €Item no.500 177 29 1H1/X1.9/250 3.24 120 2.87 0304-0500 N31000 212 29 3H1/X1.9/250 4.09 64 3.93 0304-1000 N32500 282 29 3H1/X1.9/250 7.50 26 6.90 0304-2500 N3Bottle carrierNo. ofbottlesContainerdia. mmOuter dimensionof rim L x W xH mmPrice €Quantityscale fromScaleprice €Item no.6 95 330x255x280 11.25 10 10.40 0361-0006 N3Bottle carrier boxNo. ofbottlesContainerdia. mmOuter dimensionof rim L x W xH mmPrice €Quantityscale fromScaleprice €Item no.8 95 420x300x210 24.15 10 21.95 0361-0008 N3161

Aluminum bottle | light, unbreakable, seamlessBulk pricesThe aluminium bottle is particularlysuited for storing, transportor sending substances and referencesamples which have to bestored completely unaltered.Other properties: can be completelyemptied without residues,odour-neutral, imperviousto light, rustproof.Pure aluminium (material AL99.5)With tamper-evident screwcap made of PP with aluminiuminner sealSuitable for foodWith UN approval (for 60-1200 ml), see page 178Aluminum bottleCapacity ml Dia. mm Height with cap UN approval Price € Quantity scale Scale price € Item no.mmfrom38 35 70 no 1.32 387 1.21 0327-0038 N360 40 88 1B1/X/250 1.45 304 1.31 0327-0060 N3120 57 97 1B1/X/250 1.73 143 1.57 0327-0120 N3300 57 160 1B1/X/250 2.31 149 2.26 0327-0300 N3600 74 192 1B1/X/250 3.36 84 3.27 0327-0600 N31200 88 248 1B1/X/250 3.97 130 3.80 0327-1200 N3162www.buerkle.de | info@buerkle.de | Hotline +49 (0) 76 35 8 27 95-0

Transport bottle aluminium UN | UN-approval for dangerous goodsThe UN code is printed onto the bottles inblack.Aluminium transport bottles with screw cap close safely and tightly and are approved for packagingtype I (X). The UN code is printed onto the bottles in black.Pure aluminium (material AL 99.5)FKM sealUN approved (see page 178)With eyelets, sterilisableWith tamper-evident screw cap made of PPwith aluminium inner seal.Transport bottle aluminium UNCapacity ml Dia. mm Height mm UN approval Price € Quantity scale Scale price € Item no.from125 50 105 1B1/X/250 14.30 10 12.80 0329-0125 N3250 65 140 1B1/X/250 16.85 50 15.35 0329-0250 N3500 80 145 1B1/X/250 20.60 30 19.00 0329-0500 N31250 100 205 1B1/X/250 22.30 45 20.30 0329-1250 N3163

Tubes with screw capWide-necked boxes, roundWide-necked containers with very good shatter resistancefor convenient filling. Particularly suited for storingor shipping powders and granules.Shapely packing container with screw cap. Emptying without residues becausethere are no crevices, cost-effective.PP, whiteSterilisableHDPE, transparent, shatterproofScrew lid made of PP with seal made of PEBulk pricesTubes with screw capCapacity ml Dia. mm Height mm Price € Quantity scale Scale price € Item no.from12 25 31 0.20 100 0.18 6214-0012 N325 31 40 0.31 100 0.26 6214-0025 N360 41 56 0.56 100 0.45 6214-0060 N390 52 52 0.62 100 0.51 6214-0090 N3125 52 67 0.71 100 0.56 6214-0125 N3250 68 79 1.16 100 0.91 6214-0250 N3625 90 113 1.26 70 1.01 6214-0600 N31000 102 129 3.11 80 2.42 6214-1000 N3Wide-necked boxes, roundCapacitymlDia.mmNeck dia.insidemmHeightcaplessmmPrice € QuantityscalefromScaleprice€Item no.100 48 31 77 1.21 100 1.08 6282-0100 N3250 65 41 98 1.75 100 1.55 6282-0250 N3500 80 53 122 2.23 100 2.01 6282-0500 N3750 94 53 130 2.51 108 2.44 6282-0750 N31000 100 67 153 2.78 75 2.70 6282-1000 N31500 114 67 173 3.62 48 3.24 6282-1500 N32000 126 67 192 4.51 40 4.09 6282-2000 N3164www.buerkle.de | info@buerkle.de | Hotline +49 (0) 76 35 8 27 95-0

Wide-necked boxes, square shaped | clear or brown materialThe wide opening of the container enables easy fillingwith liquid, powder or granules such as tablets, capsules,dyes, shipments of samples, specimens, spicesetc. Also suitable for gift packages and hobby articles.For light-sensitive material, brown transparent wideneckedcontainers are particularly suited.PVC crystal-clear or brown transparentPETG crystal-clearLid made of PEWide-necked boxes, square shapedMaterial Capacity ml Length mm Width mm Height with cap Neck dia. Price € Quantity scale Scale price € Item no.mminside mmfromPETG crystal clear 50 38 38 63 23 0.93 162 0.87 0357-0050 N3PETG crystal clear 100 46 46 75 31 1.08 80 0.97 0357-0100 N3PETG crystal clear 200 59 59 91 41 1.66 100 1.50 0357-0200 N3PETG crystal clear 500 80 80 111 54 2.42 100 2.20 0357-0500 N3PETG crystal clear 1000 95 95 152 69 3.16 96 3.05 0357-1000 N3PVC crystal clear 50 38 38 63 23 0.78 162 0.69 0355-0050 N3PVC crystal clear 100 46 46 75 31 0.91 80 0.86 0355-0100 N3PVC crystal clear 200 59 59 91 41 1.35 100 1.24 0355-0200 N3PVC crystal clear 300 66 66 98 41 1.50 100 1.38 0355-0300 N3PVC crystal clear 500 80 80 111 54 1.98 100 1.81 0355-0500 N3PVC crystal clear 750 92 92 120 69 2.36 114 2.17 0355-0750 N3PVC crystal clear 1000 95 95 152 69 2.64 96 2.42 0355-1000 N3PVC crystal clear 2000 120 120 190 69 4.32 44 3.92 0355-2000 N3PVC amber transparent 100 46 46 75 31 0.90 80 0.81 0356-0100 N3PVC amber transparent 200 59 59 91 41 1.34 100 1.23 0356-0200 N3165

All-purpose tubes, screw capAll-purpose boxes, squareAll-purpose boxesContents can be recognised easily due to the transparentsides. Emptying without residues.166PP, transparent, screw lid PENo crevicesAll-purpose tubes with screw cap; transparentContainerdia. mmHeightmmPrice €CapacitymlQuantityscalefromScaleprice €Item no.250 104 50 3.45 25 3.06 6202-0250 N3500 104 100 4.42 14 4.03 6202-0500 N31000 126 126 8.00 12 7.35 6202-1000 N3Box for storing, packing, taking samples, sampling and transport of pastes, granules,powders, soil samples and frozen goods (-40°C up to briefly + 95°C). Idealuse of space, can be stacked. Complete with press-in lid.PE, transparentCan be deep frozenNo crevicesAll-purpose boxes, square shapedCapacity ml L x W x H mm Price € Quantity scale from Scale price € Item no.500 103 x 103 x 64 1.98 20 1.80 6250-0500 N31000 103 x 103 x 127 3.06 16 2.67 6250-1000 N31000 208 x 103 x 64 3.74 18 3.40 6250-1001 N31500 208 x 103 x 94 5.00 20 4.55 6250-1500 N32000 208 x 208 x 64 6.80 20 6.00 6250-2000 N32000 255 x 103 x 94 6.10 20 5.55 6250-2300 N33200 208 x 208 x 94 7.50 14 6.90 6250-3300 N3All-purpose boxes, roundCapacity ml Outer dia. Outer dia. Height mm Price € Quantity Scale price € Item no.bottom mm top mmscale from250 60 78 90 2.41 60 2.20 6210-0250 N3500 75 95 127 2.72 24 2.49 6210-0500 N31000 118 136 110 3.56 20 3.16 6210-1001 N32000 148 169 143 5.65 25 5.15 6210-2000 N3www.buerkle.de | info@buerkle.de | Hotline +49 (0) 76 35 8 27 95-0

Sample boxes, asepticSample box with patented closure. The lid can be opened with one hand and itshinge angle is 90°. Liquid/condensate in the lid runs into an absorbing groove integratedin the lid, nothing is lost, nothing can drip. The box is completely tight.No crevices, therefore easy to fill and can be emptied without residues. The box isproduced under aseptic conditions. It is autoclavable and suitable for deep freezing.PP, transparentAsepticWith area for labelling and graduationSample boxes, asepticCapacity ml Height mm Dia. mm Model Price € Quantity scale from Scale price € Item no.50 78 31 with labeling area and graduation 0.30 650 0.28 6206-0060 N390 80 43 graduated to 80ml 0.35 350 0.32 6206-0100 N3300 88 75 graduated 0.93 240 0.86 6206-0300 N3167

Sample tubes aseptic, with sealSample container, roundThe sample boxes are manufactured in the cleanroom and sealed in theinjection moulding machine at over 100°C, so that the insides of the boxesare virtually sterile. This method makes the boxes absolutely leakproof,as the cap and box adapt ideally to each other during the cooling process.No crevices, therefore easy to fill and can be emptied without residues.With tamper-evident seal which guarantees virtual sterility until thefirst opening. After opening, it can be sealed again with a practical seal. PP, transparent Aseptic With graduation SterilisableSample tubes aseptic, with sealCapacity ml Height mm Dia. mm Price € Quantity Scale Item no.scale from price €55 84 29 0.32 90 0.30 6207-0055 N3340 119 63 0.58 90 0.52 6207-0340 N3Sample box with screw lid. Ideal for taking samples and transport.Available in two material qualities: highly transparent PP for powder,pastes, liquids, or PFA for super pure collection of samples.Emptying without residues because there are no crevices.PP or PFA autoclavableThick sidesSample container, roundMaterialCapacitymlInnerdia.mmOuterdia.mmHeightwithcapmmPrice €QuantityscalefromScaleprice €Item no.PP 60 35 50 93 7.00 10 6.10 6203-0060 N3PP 180 50 65 119 10.10 10 8.85 6203-0180 N3PFA 90 50 65 65 52.60 10 47.95 6205-0090 N3PFA 180 50 65 119 68.10 10 60.40 6205-0180 N3168www.buerkle.de | info@buerkle.de | Hotline +49 (0) 76 35 8 27 95-0

Sample beaker with coverSteriPlast sampling tubeSample beaker with liquid-tight red screw-on cover. The samplebeakers are aseptic and suitable for use with food. The beakers canbe autoclaved without the cover. PP beaker, LDPE cover Temperature resistance of beaker -20°C/+120°C, cover-80°C/+75°C AsepticSterile sampling tube with removable handle and patented sealingcover. The lid can be opened with one hand and is then at a 90° angle.Liquid/condensate in the lid goes into an absorbing channel integratedinto the lid, nothing is lost, nothing can drip.The tightly closing sampling tube with a handle of 24 cm in lengthenables a clean sample to be placed directly in the sampling container.This mainly prevents cross-contamination.Polypropylene, blue transparentSterile, packed separatelyPatented sealing coverSample beaker with coverCapacity ml Dia. mm Height mm Price € Quantity Scale Item no.scale from price €125 52 74 0.91 380 0.73 7103-0125 N3SteriPlast sampling tubeCapacity ml Dia. mm Height mm Price € Quantity Scale Item no.scale from price €90 43 80 3.06 150 2.71 6206-0101 N3169

Flachmann - the compact jerrycan | for more content on less shelf width12Flachmann - the compact jerrycanThe compact jerrycan Flachman is ideal as a spacesavingcanister with its width of 6.5 cm.Different liquids can be stored and decanted in asmall space. Flachmann can also be stored lying on itsside e. g. in a refrigerator. It is very stable due toribbed structure and thick sides.Using the support stand for two or three canisters,any number of canisters can safely be placed in theopen. The compact jerrycan can also be used as a settlingcanister.34170www.buerkle.de | info@buerkle.de | Hotline +49 (0) 76 35 8 27 95-0

Flachmann - the compact jerrycan | for more content on less shelf width5 6With or without threaded connector 3/4”PP, transparentWith tamper-proof closurecanister without valve autoclavableWith moulded, indestructible litre graduationCanister support made of aluminium for securestand as accessorySpigot StopCock with rotatable discharge angle,which fits canisters equipped with glands withthreads ¾”, available as accessoryFlachmann - the compact jerrycanModelCapacityWidth Depth Height Opening Price Quantity Scale Item no.l mm mm mm dia. mm € scale from price €without threaded connector 5 65 335 335 41 26.85 10 24.15 0435-1050 N4with threaded connector 3/4” 5 65 335 335 41 28.65 10 25.65 0435-2050 N4AccessoriesDescriptionPrice € Item no.1 Support stand for two compact jerrycans 18.65 0435-9102 N41 Support stand for three compact jerrycans 19.80 0435-9103 N42 Venting valve in screw cap 11.60 0435-9200 N43 Stopcock angled 20.30 0525-1000 N44 Compact stop cock 13.25 0530-1000 N4Closure cap 3/4” 4.62 0600-0090 N45 Compact jerrycan & Compact stop cock set 38.50 0435-3000 N46 Compact jerrycan & StopCock set 46.50 0435-0001 N4171

JerrycansCanister for storage or transport. Canister with UNtransport approval and tamper-evident seal.HDPEUN approval 3H1/X1.9/250 (see page 178)Screw lid with drain cock available as accessoryBulk pricesJerrycansCapacity l L x W x H mm Weight g Neck dia. inside mm Thread Colour Price € Quantity scale from Scale price € Item no.5 190 x 145 x 251 250 40,5 DIN50 transparent 4.86 16 4.37 1427-0005 N310 230 x 190 x 310 450 40,5 DIN50 transparent 6.10 10 5.45 1427-0010 N320 290 x 246 x 385 950 48,5 DIN60 blue 16.20 6 14.80 1427-0020 N330 320 x 284 x 435 1250 48,5 DIN60 blue 23.35 6 21.15 1427-0030 N3AccessoriesDescription Price € Item no.Screw closure DIN50 with spigot for jerrycans 6.90 1427-9102 N3Screw closure DIN60 with spigot for jerrycans 7.70 1427-9100 N3Original screw cap DIN50 0.55 1427-9105 N3Original screw cap DIN60 1.09 1427-9106 N3172www.buerkle.de | info@buerkle.de | Hotline +49 (0) 76 35 8 27 95-0

Wide-necked jerrycans with/without threaded connectorWide-necked canister with extremely wide fillingopening (88 mm), easy to clean on the inside, whichis particularly important when storing sensitive substances.Carrying handles and screw lid guaranteesafe and convenient transport. The wide-necked canistercan also be used as a settling canister. Via athreaded connector just above the base, a spigot orother accessories with an inner thread of 3/4“ can beattached.HDPE, transparentUV stabilisedSelf-adhesive blue litre graduation and spigotavailable as accessoryWide-necked jerrycans with/without threaded connectorModel Capacity l Width mm Depth mm Height mm Ventilation dia. mm Price € Quantity scale from Scale price € Item no.without threaded connector 5 130 290 280 18 23.05 6 20.60 0431-0005 N3without threaded connector 10 137 310 400 18 32.80 5 29.60 0431-0010 N3without threaded connector 20 165 365 485 - 51.30 3 46.15 0431-0020 N3without threaded connector 30 240 365 485 - 64.50 2 56.50 0431-0030 N3with threaded connector 3/4” 5 130 290 280 18 29.60 6 26.55 0431-1005 N3with threaded connector 3/4” 10 137 310 400 18 42.50 5 38.80 0431-1010 N3with threaded connector 3/4” 20 165 365 485 - 63.50 3 55.70 0431-1020 N3with threaded connector 3/4” 30 240 365 485 - 76.10 2 67.90 0431-1030 N3AccessoriesDescription Price € Item no.Graduation for wide-necked jerrycans 5 l 4.88 0431-9051 N3Graduation for wide-necked jerrycans 10 l 4.88 0431-9011 N3Graduation for wide-necked jerrycans 20 l 4.88 0431-9021 N3Graduation for wide-necked jerrycans 30 l 4.88 0431-9031 N3Stopcock angled 20.30 0525-1000 N4Compact stop cock, see page 42 13.25 0530-1000 N4Closure cap 3/4”, see page 44 4.62 0600-0090 N4173

Storage bottles, with/without threaded connectorRobust storage bottle with particularly thick sideswith sturdy carrying handle for safe transport andstorage. Blue litre graduation printed on. The ventingvalve (accessory) lets air into the container in orderto prevent a vacuum in the bottle. The canister canalso be used as a settling canister. Via a threadedconnector, a spigot or other accessories with an innerthread/cap nut of 3/4” can be attached.HDPEBottle opening diameter 50 mm1 2Storage bottles, with/without threaded connectorModel Capacity l Container dia. mm Height capless mm Handles Price € Quantity scale from Scale price € Item no.without threaded connector 5 167 330 1 23.25 11 21.05 0401-0005 N3without threaded connector 10 206 427 1 31.25 6 28.30 0401-0010 N3without threaded connector 25 278 580 2 64.50 5 58.90 0401-0025 N3without threaded connector 60 346 830 2 124.40 4 113.95 0401-0060 N3with threaded connector 5 167 330 1 31.95 11 29.10 0402-0005 N3with threaded connector 10 206 427 1 39.95 6 36.05 0402-0010 N3with threaded connector 25 278 580 2 73.75 5 67.90 0402-0025 N3with threaded connector 60 346 830 2 127.80 4 118.60 0402-0060 N3AccessoriesDescription Price € Item no.Ventilation seal for storage bottles 16.20 0401-9100 N31 Stopcock angled (see page 42) 20.30 0525-1000 N42 Compact stop cock (see page 44) 13.25 0530-1000 N4174www.buerkle.de | info@buerkle.de | Hotline +49 (0) 76 35 8 27 95-0

Tubs, roundIndustrial tubsMixing/dosing containerTub for every purpose, with strong edge andpractical carrying handles for safe transport.A lid can be delivered for every tub.Tub made of HDPETemperature resistant from -30° to +70°Suitable for foodHigh degree of chemical resistanceAttention! Make sure to pay attentionto the “List of Chemical Resistance“!Cost-effective and robust industrial tubswith stable handle. Made of white-transparentLLDPE, conical and stackable. Lid withintegrated handle available.Tub made of LLDPETemperature resistant from -50° to +75°Suitable for foodAttention! Make sure to pay attentionto the “List of Chemical Resistance“!The containers close completely tightly. Theyhave thick sides, they are seamless, impactresistant and stressfree sintered. The wideneckedopening enables safe filling.LDPEWith 3/4” inner thread at the containerbaseOpening Ø 150 mmSuitable for foodTubs, roundCapacityDia. top/below x H mm Price € Item no.l40 370/330 x 440 41.20 3482-0040 N350 370/330 x 555 49.10 3482-0050 N375 460/400 x 535 58.90 3482-0075 N3110 460/420 x 710 123.20 3482-0110 N3AccessoriesDescription Price € Item no.Lids for tubs, round, for 370 mm dia. 10.10 3482-0401 N3Lids for tubs, round,for 460 mm dia.22.70 3482-0751 N3Industrial tubsCapacityDia. top/below x H mm Price € Item no.l100 540/415 x 660 33.95 3480-0100 N3120 540/430 x 750 45.75 3480-0120 N3AccessoriesDescription Price € Item no.Lid for industrial tubs, for 540 8.85 3480-0002 N3mm dia.Mixing/dosing containerCapacityDia. Height Divi-Price € Item no.l mm mm sion l60 450 600 10 127.80 3460-0060 N2100 465 850 10 172.75 3460-0100 N2200 560 1020 20 276.30 3460-0200 N2500 815 1140 50 529.40 3460-0500 N2175

Sealable wide-mouth containersWide-mouth containers with handleWide-necked container made of transparent polythylenewith intermediate lid. The wide opening enableseasy cleaning. The bottles are sealable.Suitable for food contact applicationsMany usesContainer with 2.3l and 4.4l contents and particularly wide opening. Thereforeideal for filling with bulk goods of all kinds. Products such as spices, tea, granulatescan be packaged, stored or displayed as samples in these containers. Spacesavingsquare shape. Safe handling with integral handle Transparent polyethylene provides good view of contents. Leakproof wide-necked lid 0317-2300 with tamper-evident screw cap made of blue PP, 0317-4400 withscrew cap made of LDPESealable wide-mouth containersCapacity ml Container dia. mm Height with cap mm Opening dia. mm Price € Quantity scale from Scale price € Item no.2000 120 235 82 11.60 6 10.60 1406-0002 N33000 135 285 82 13.55 6 12.20 1406-0003 N3Wide-mouth containers with handleCapacity ml L x W mm Height with cap mm Neck dia. inside mm Thread dia. mm Price € Quantity scale from Scale price € Item no.2300 135 x 135 192 68,5 80 8.10 36 7.50 0317-2300 N34400 142 x 142 263 109 120 10.00 52 9.50 0317-4400 N3176www.buerkle.de | info@buerkle.de | Hotline +49 (0) 76 35 8 27 95-0

Universal storage containersStorage and stacking containersTransport rollerPractical storage containers with closed gripping edges for safetransport of pourable or liquid contents. Rounded inner edges andsmooth inner surfaces for easy cleaning enable use in the foodstuffs/hygienesector.HDPE, whiteCan be stackedAttention! Make sure to pay attention to the “List of ChemicalResistance“!Universal storage containersCapacitylOuter dimensionof rim L x W xH mmInner dimensionL x W x H mmPrice €QuantityscalefromScaleprice €Item no.29 660 x 450 x 130 600 x 400 x 120 26.45 10 24.15 3418-0129 N248 660 x 450 x 220 600 x 400 x 210 37.65 10 34.20 3418-0148 N294 660 x 450 x 410 600 x 400 x 400 56.65 10 51.30 3418-0194 N2AccessoriesDescription Price € Item no.Lid for universal storage containers, PS white 17.55 3418-0001 N2Stable storage containers made of durable PP with external reinforcementribs. Temperature resistant from -40°C to +90°C According to Euro standards Lid and transport rollers available as accessoryStorage and stacking containersCapacitylOuter dimensionof rim L x W xH mmInner dimensionL x W x H mmPrice €QuantityscalefromScaleprice €Item no.11 400 x 300 x 120 367 x 267 x 116 17.15 10 15.75 3414-0111 N217 400 x 300 x 180 367 x 267 x 176 20.95 10 19.20 3414-0117 N223 400 x 300 x 220 367 x 267 x 216 27.80 10 24.60 3414-0120 N223 600 x 400 x 120 567 x 367 x 114 27.75 10 25.35 3414-0123 N238 600 x 400 x 180 567 x 367 x 176 35.35 10 32.05 3414-0138 N245 600 x 400 x 220 567 x 367 x 216 40.25 10 36.70 3414-0148 N264 600 x 400 x 320 567 x 367 x 316 46.90 10 42.70 3414-0164 N280 600 x 400 x 420 567 x 367 x 416 53.15 10 48.30 3414-0181 N2AccessoriesDescription Price € Item no.Lid for storage/stacking containers 400 x 300 mm 10.70 3414-0001 N2Lid for storage/stacking containers 600 x 400 mm 17.15 3414-0002 N2Transport trolley for containersModel Price € Quantity scale from Scale price € Item no.for 600 x 400 mm 76.10 10 69.10 3414-9900 N2177

Packaging containers with UN approvalWhat is a container with UN approval?The person who fills a package with hazardousmaterials is responsible for its safety ondispatch. In a UN approved container youcan transport hazardous goods safely withouthaving to repack them and thus savecosts.What is “UN-approved”?The UN has drawn up a list of more than6000 hazardous substances classifiedaccording to the risk that they represent;this determines their packaging group.Packaging group I (X) corresponds to a highdegree of risk represented by the contents,e.g. very corrosive substances; packaginggroup II (Y) a medium degree of risk andpackaging group III (Z) less hazardous substances.The UN approval describes the type ofpackaging to be used for the transport ofhazardous substances. The certificate isissued by recognized material testing institutes.In mass production the manufacturermust guarantee that the product meets thespecifications for the type of packaging andthat the packaging is manufactured andtested according to a quality assurance programrecognized and monitored by theregistration office.Test criteria (limits must not be infringed) chemical compatibility temperature flash point < 61 °C drop height pressure (i.e. vapor pressure of the contentsplus partial pressure of any gasesthat may be present) packaging groups I, II, III (density kg/l) shelf life from filling date (if applicable)Approval numbers The identification contains the symbolfor UN-tested packaging, the code for thecontainer material, packaging group,test pressure in kPa, year of manufacture,country of approval, registrationoffice, approval number and manufacturer. If the approval number contains a letter(e.g. F or S) in the position that wouldotherwise be occupied by the test pressurein kPa then the packaging is onlyapproved for use with solids, not withliquids. New approval numbers apply for alltypes of transport, i.e. there is no longerany limitation to road, rail, sea or airtransport.Wide-neck reagentbottlerectangular/space-saving, sturdyWith UN approval forsolidssee page 152Aluminum bottlewith UN-approval forthe transport ofdangerous goodssee page 161Aluminum bottlesee page 162Transport bottleUN-certified bottle forchemicalssee page 163Jerrycansstackable, made oftransparent HDPE,space-savingsee page 172Wide-mouthcontainersextra-wide openingfor secure fillingsee page 179178www.buerkle.de | info@buerkle.de | Hotline +49 (0) 76 35 8 27 95-0

Disposal kegs, wide-mouth containersWide-mouth containers, HDPEThe wide-necked container is approved for bulk goods. Used for disposalor storage. For liquids, powders or granules. Can be closedtightly and sealed.HDPETemperature resistant from -20°C to + 80°CUN transport approval 1H2/XDisposal kegs, wide-mouth containersCapacityl dia. mm cap mm dia.Container Height with Opening Price €mmQuantityscalefromScaleprice €Item no.3,6 198 171 136 13.10 10 11.85 1105-0003 N36 198 263 136 16.85 10 15.25 1105-0006 N310 274 238 203 23.45 10 23.05 1105-0010 N326 316 425 203 39.10 10 35.35 1105-0026 N334 338 449 295 44.30 10 40.50 1105-0033 N3AccessoriesDescription Price € Item no.SampleSafe seal, red, 100 pieces 65.75 5399-2902 N2Storage or transport container made of HDPE. For liquids, powdersor granules. Can be closed tightly.Keep the container upright when transporting liquids!Wide-mouth containers, HDPECapacity l Containerdia. mmHeightwith capmmOpeningdia. mmPrice €QuantityscalefromScaleprice €Item no.5 192 250 110 22.90 14 22.00 1406-1005 N310 232 325 110 31.85 6 30.85 1406-1010 N3179

Containers, rectangular and round shapedDepending on temperatureand the expected contents,the rectangular containersmay have to be strengthenedwith a frame. Kindlyyou ask us.Container for various applications. Produced seamlessly and stressrelievedwith the LaboPlast ® sintering method. The wall thicknessincreases downwardly. This guarantess optimum ratio of wall thicknessto filling load. The containers are also colored black for UVprotectionand are available in other wall thicknesses.Custom-made, exchange excluded.L-LDPE (linear LDPE), transparentRupture-proofWe will mount the container connector directly into the containerfor you. The thread connectors are possible anywhere. Please statethe exact position on the container, if applicable.Container threadThread Price € Item No.3/4‘‘ 37.80 3440-0034 N2AccessoriesModel Price € Item No.StopCock 20.30 0525-1000 N4Compact stop cock 13.25 0530-1000 N4180www.buerkle.de | info@buerkle.de | Hotline +49 (0) 76 35 8 27 95-0

Containers, rectangularCapacity l Inner dimension L Wall thickness Price €Item no.x W x H mm mm13 220 x 220 x 410 5 85.30 3440-0135 N223 540 x 370 x 130 5 100.25 3440-0235 N240 390 x 190 x 620 5 113.95 3440-0405 N245 600 x 600 x 165 5 117.55 3440-0455 N248 400 x 400 x 300 5 109.45 3440-0485 N250 1000 x 320 x 160 5 113.95 3440-0505 N256 315 x 315 x 635 5 124.40 3440-0565 N270 460 x 310 x 570 5 137.00 3440-0705 N285 600 x 340 x 480 5 149.70 3440-0855 N290 600 x 400 x 410 6 162.30 3440-0906 N2100 780 x 460 x 320 6 173.90 3440-1006 N2115 500 x 400 x 600 6 184.20 3440-1156 N2118 600 x 250 x 820 6 196.90 3440-1186 N2130 710 x 330 x 560 6 195.70 3440-1306 N2150 600 x 400 x 630 6 208.40 3440-1506 N2155 600 x 500 x 560 6 218.85 3440-1556 N2165 780 x 500 x 420 6 214.20 3440-1656 N2190 600 x 400 x 800 6 247.50 3440-1906 N2250 1000 x 600 x 450 6 293.50 3440-2506 N2260 800 x 600 x 600 7 345.40 3440-2607 N2285 600 x 600x 820 7 361.35 3440-2857 N2320 1000 x 400 x 800 7 392.50 3440-3207 N2400 860 x 560 x 840 7 448.80 3440-4007 N2Containers, round shapedCapacity l Inner dia. mm Height mm Wall thickness Price € Item no.mm14 245 325 5 78.35 3490-0144 N225 310 390 5 85.30 3490-0254 N230 310 430 5 87.65 3490-0305 N235 320 530 5 94.40 3490-0355 N250 410 480 5 103.65 3490-0505 N255 310 915 5 113.95 3490-0555 N260 410 530 5 107.10 3490-0605 N280 430 590 5 113.95 3490-0805 N285 390 710 5 117.55 3490-0855 N2100 470 680 5 129.00 3490-1005 N2110 540 540 6 139.35 3490-1106 N2120 470 720 6 145.10 3490-1206 N2145 600 510 6 149.70 3490-1456 N2150 550 730 6 168.15 3490-1506 N2160 460 1020 6 172.75 3490-1606 N2180 540 820 6 178.50 3490-1806 N2200 560 840 6 188.85 3490-2006 N2205 800 440 6 191.10 3490-2056 N2210 540 950 6 199.05 3490-2106 N2250 550 1040 6 218.85 3490-2506 N2290 740 770 6 265.95 3490-2906 N2300 690 830 6 253.35 3490-3006 N2400 760 1050 6 394.75 3490-4006 N2850 970 1170 7 711.15 3490-8507 N2Lid for containers, rectangularModel Price € Item no.for 13 l container 49.10 3440-0131 N2for 23 l container 103.65 3440-0231 N2for 40 l container 67.90 3440-0401 N2for 45 l container 137.00 3440-0451 N2for 48 l container 94.40 3440-0481 N2for 50 l container 143.95 3440-0501 N2for 56 l container 79.45 3440-0561 N2for 70 l container 92.15 3440-0701 N2for 85 l container 109.45 3440-0851 N2for 90 l container 107.10 3440-0901 N2for 100 l container 137.00 3440-1001 N2for 118 l container 97.90 3440-1181 N2for 130 l container 117.55 3440-1301 N2for 150 l container 113.95 3440-1501 N2for 155 l container 125.55 3440-1551 N2for 165 l container 148.60 3440-1651 N2for 190 l container 113.95 3440-1901 N2for 250 l container 196.90 3440-2501 N2for 260 l container 160.05 3440-2601 N2for 285 l container 143.95 3440-2851 N2for 320 l container 178.50 3440-3201 N2for 400 l container 182.70 3440-4001 N2Lid for containers, round shapedModel Price € Item no.for 14 l container 45.35 3490-0141 N2for 25 l container 45.35 3490-0251 N2for 30 l container 45.35 3490-0301 N2for 35 l container 52.95 3490-0351 N2for 50 l container 52.95 3490-0501 N2for 55 l container 45.35 3490-0551 N2for 60 l container 52.95 3490-0601 N2for 80 l container 52.95 3490-0801 N2for 85 l container 52.95 3490-0851 N2for 100 l container 52.95 3490-1001 N2for 110 l container 65.75 3490-1101 N2for 120 l container 52.95 3490-1201 N2for 145 l container 65.75 3490-1451 N2for 150 l container 65.75 3490-1501 N2for 160 l container 52.95 3490-1601 N2for 180 l container 65.75 3490-1801 N2for 200 l container 65.75 3490-2001 N2for 205 l container 102.50 3490-2051 N2for 210 l container 65.75 3490-2101 N2for 250 l container 65.75 3490-2501 N2for 290 l container 80.70 3490-2901 N2for 300 l container 80.70 3490-3001 N2for 400 l container 80.70 3490-4001 N2for 850 l container 181.85 3490-8501 N2181

Safety jerrycans stainless steelSafety cans stainless steel0.8 mm sidesHandles made of solidstainless steelClosure thread 1 1/2”Seals made of PTFEAccredited for UNtransportsaccording toADR, RID,IMDG Code,ICAO-TI, GGVSEB,GGVSeeStainless steel V4A(1.4571), 0.6 mm thicknessSeals made of PTFEHandle made of powdersurfacedaluminiumClosure thread 1¼”Safety canister for transport and storage made of stainless steel 1.4571 for 5l and10l canisters and 1.4301 for 20l canisters.Protection from exploding through flame protection and excess pressure valve. Thecontainers have a high degree of chemical resistance and they save space.In canisters with excess pressure valve, pressure balance takes place from about0.3 bar.Safety canister with self-closing fine dosage spout 20l: with separate ventilation.Canisters with a venting screw enable manual air supply when used or manualpressure balance during storage.For safe metering and handling of smaller amounts offlammable liquids. Protection from exploding throughflame protection and excess pressure valve, the containershave a high degree of chemical resistance. Canwith removable flame protection in the filling connectorand excess pressure valve in the self-closing fine dosagespout (pressure balance from about 0.3 bar).Safety jerrycans stainless steelModel Capacity l Purpose L x W x H mm UN approval Price € Item no.with screw cap without pressure-relief valve 10 Transport 280 x 130 x 380 3A1/X1.6/300 353.40 2601-7010 N2with screw cap and pressure-relief valve 5 Storage 200 x 130 x 310 no 302.70 2601-3005 N2with screw cap and pressure-relief valve 10 Storage 280 x 130 x 380 no 361.35 2601-3010 N2with screw cap and pressure-relief valve 20 Storage 345 x 175 x 470 no 441.95 2601-3020 N2with fi ne dosage spout incl. pressure-relief valve 10 Storage 280 x 130 x 380 no 410.95 2601-2010 N2with fi ne dosage spout, pressure-relief valve, ventilation 20 Storage 345 x 175 x 470 no 481.10 2601-2020 N2screwSafety cans stainless steelCapacity l Dia. mm Height mm Purpose UN approval Price € Item no.1 111 235 Storage no 248.65 2601-1001 N22 131 295 Storage no 269.00 2601-1002 N25 165 400 Storage no 287.75 2601-1005 N2182www.buerkle.de | info@buerkle.de | Hotline +49 (0) 76 35 8 27 95-0

Safety storage container stainless steelSafety containers for transport and storage made ofhigh-quality stainless steel 1.4301/1.4571 with thicknessof sides of 0.8 mm (10 l), 1.2 mm (25 l) and1.5 mm (50 l). The 25l container can be stacked.Protection from exploding through flame protectionand excess pressure valve, seals made of PTFE, thecontainers have a high degree of chemical resistance.In safety containers with excess pressure valve, pressurebalance takes place from about 0.3 bar.For containers with self-closing tap, constant ventilationcan be set via a plastic lever on the screw cap.The contents display made of perfluoroalkoxy copolymers(PFA) enables a visual contents check when fillingand emptying.Accredited for UN-transportsaccording to ADR, RID,IMDG Code, ICAO-TI,GGVSEB, GGVSeeSafety storage container stainless steelModel Capacity l Purpose Height mm Thread Dia. mm UN approval Thread, outflowingPrice € Item no.sidewith screw cap, without pressure-relief valve 25 Transport/Storage 530 1 1/2’’ 300 1A1/X1.6/400 - 440.85 2601-5125 N2with screw cap and pressure-relief valve 50 Storage 600 2’’ (TPI) 380 no - 523.65 2601-5050 N2with tab and pressure-relief valve 10 Storage 350 1 1/2’’ 260 no 3/4’’ 627.30 2601-4010 N2with tab and pressure-relief valve 25 Storage 530 1 1/2’’ 300 no 3/4’’ 743.40 2601-4025 N2with tab, pressure-relief valve and level indicator 10 Storage 350 1 1/2’’ 260 no 3/4’’ 864.25 2601-6010 N2183

Packaging bucketPackaging bags with closurePackaging bucket for transport, packaging and storing of variousmaterials. Suitable for the food or building material industries andnon-aggressive chemicals in environmental protection, hospitalsand the household. With strong handle. Quality closure on the bucketfor product safety.PP, whiteAir-tight closureComplete with lidWith advertising printing in large quantities on requestBulk pricesPackaging bucketCapacity l Dia. top Height with Price € Quantity Scale Item no.mm cap mmscale from price €1 132 131 1.21 100 1.09 2327-0001 N32 175 132 1.90 80 1.75 2327-0020 N33 225 123 2.40 45 2.18 2327-0030 N35 225 194 3.06 36 2.71 2327-0050 N310 268 263 4.09 25 3.74 2327-0010 N3Bags with the patented ”zipper” for storing, collecting, protectingand shipping of specimens, samples and sales products. Contentsremain dust-free. The film is waterproof and has good tear resistance.LDPE, crystal-clear0.05 mm strong filmPackaging bags with closureBulk pricesL x W mm Volume ml Pieces per Price € Quantity Scale Item no.packscale from price €100 x 70 80 100 7.60 10 7.00 2348-0002 N3130 x 60 100 100 4.88 10 4.42 2348-0001 N3120 x 80 140 100 5.55 10 5.05 2348-0003 N3150 x 100 300 100 6.70 10 6.10 2348-0004 N3170 x 120 400 100 8.60 10 8.00 2348-0005 N3220 x 160 1000 100 11.25 10 10.40 2348-0006 N3250 x 180 1500 100 12.35 10 11.35 2348-0007 N3300 x 200 2500 100 15.45 10 14.10 2348-0008 N3350 x 250 4500 100 20.05 10 17.90 2348-0009 N3400 x 300 6500 100 22.90 10 20.80 2348-0010 N3184www.buerkle.de | info@buerkle.de | Hotline +49 (0) 76 35 8 27 95-0

SteriBag StandUp sample bagSteriBag StandUp is a sterilesample bag with a stand-upbase. The special bottom unfoldsas soon as the bag is filled. Thismakes SteriBag StandUp stableand able to stand on its ownwithout a separate stand or support,leaving both your handsfree to take the sample and fillthe bag. The wire bracket at theclosure keeps the bag open,making it easy and convenientto fill.The sample bag is the idealspace-saving, unbreakable, inexpensiveand sterile replacementfor bottles and beakers.Can be used for samples availableas liquids, powders, solidsand pastes; suitable for foodsand can be frozen.The stable standing SteriBagStandUp sample bag is easy andsafe to transport.SteriBag StandUp, the samplebag for easy handling of samples.Bulk pricesSteriBag StandUp sample bagCapacity ml L x W mm Pieces per Price € Quantity Scale Item no.packscale from price €400 229x114 500 159.55 5 151.55 5344-0400 N3600 229x140 500 166.75 5 158.40 5344-0600 N3Sampling bag SteriBagThe sterilised sampling bag SteriBag for samples in chemistry, pharmaceuticals,medicine, veterinary science and foodstuffs etc.The bags are made of Polyethylene and are therefore exceptionallytearproof and leakproof. See page 129.Sampling bag SteriBagBulk pricesModel L x W mm PiecesperpackPrice €CapacitymlQuantityscale price €ScalefromItem no.60 without labelling area 127 x 76 500 107.10 6 101.40 5344-0060 N360 with labelling area 127 x 76 500 116.35 6 110.60 5344-0061 N3150 without labelling area 178 x 76 500 110.60 6 103.65 5344-0180 N3150 with labelling area 178 x 76 500 119.80 6 113.95 5344-0181 N3450 without labelling area 229 x 114 500 130.15 6 124.40 5344-0540 N3450 with labelling area 229 x 114 500 138.15 6 130.15 5344-0541 N3650 without labelling area 229 x 140 500 145.10 6 137.00 5344-0720 N3650 with labelling area 229 x 140 500 165.80 6 158.90 5344-0721 N3900 without labelling area 305 x 114 500 150.95 6 143.95 5344-0810 N3900 with labelling area 305 x 114 500 160.05 6 152.05 5344-0811 N31650 without labelling area 305 x 178 250 115.20 12 110.60 5344-1650 N31650 with labelling area 305 x 178 250 130.15 12 119.80 5344-1651 N3185

Table of contentsLaboratory & industrial equipment188 – 195 Trays, bowls, buckets196 – 197 Draining & test-tube racks198 – 199 Burettes, dispensers200 – 202 Funnels203 – 210 Graduated beakers211 – 213 Graduated pipettes, single mark pipettes214 – 223 Tubings, flow indicators, connectors224 – 229 Hose clamps, Two-way and three way valves, non-return valves230 – 235 Couplings236 – 239 Threaded fittings240 – 245 Vacuum pumps, water-jet pumps, SnowPack dry ice machine243 – 244 Protective equipment246 – 249 Stirring, mixing, accessories for laboratory equipmentwww.buerkle.de | info@buerkle.de | Hotline +49 (0) 76 35 8 27 95-0

Laboratory & industrial equipmentConnectors, fittings, funnels, measuring

All-purpose trays | hygienic, easy to cleanThe laboratory trays are practical all-purpose traysthat can be nested when empty, also durable, shatterproofand resist flexing. The trays have a strong,rounded rim.Suitable as a spill trough for environmentally dangerous,aggressive substances, for experiments, as anetching tray, as an instrument holder, a medicine tray,a photographic development basin, a goods presentationtray and a display tray for foodstuffs.PP, whiteManufactured using the injection moulding process,not by deep drawingTrays can be nestedTray not suitable for temperature controlled cupboardsor dishwashersTemperature resistent up to +60 °C (briefly up to+80 °C)Laboratory trays / spill throughs separateCapacity lInner dimension of base Outer dimension of Outer dimension of rim Price € Quantity scale from Scale price € Item no.L x W mmbase L x W mm L x W x H mm0.5 130 x 180 140 x 190 180 x 230 x 42 4.78 10 4.37 4201-1318 N41.5 180 x 240 190 x 250 250 x 310 x 65 8.50 10 7.80 4201-1824 N43.0 240 x 300 250 x 310 310 x 370 x 75 12.35 10 11.35 4201-2430 N410.0 300 x 400 310 x 410 420 x 520 x 120 20.05 10 18.35 4201-3040 N421.0 400 x 500 430 x 530 534 x 634 x 140 34.85 5 31.95 4201-4050 N439.0 500 x 700 520 x 720 648 x 846 x 160 50.85 5 46.25 4201-5070 N4AccessoriesDescription Price € Item no.Laboratory trays / spill throughs set - 4 piece set 40.85 4201-0095 N4Laboratory trays / spill throughs set - 6 piece set 117.55 4201-0100 N4188www.buerkle.de | info@buerkle.de | Hotline +49 (0) 76 35 8 27 95-0

Laboratory trays / spill throughs setLaboratory trays/Spill troughs in a beneficial setLaboratory tray set of 4 with one tray each: 0.5 l (L x B x H 180 x 230 x 42 mm) 1.5 l (L x B x H 250 x 310 x 65 mm) 3.0 l (L x B x H 310 x 370 x 75 mm) 10.0 l (L x B x H 420 x 520 x 120 mm)Laboratory tray set of 6 with one tray each: 0.5 l (L x B x H 180 x 230 x 42 mm) 1.5 l (L x B x H 250 x 310 x 65 mm) 3.0 l (L x B x H 310 x 370 x 75 mm) 10.0 l (L x B x H 420 x 520 x 120 mm) 21.0 l (L x B x H 534 x 634 x 140 mm) 39.0 l (L x B x H 648 x 846 x 160 mm)Laboratory trays / spill throughs setModel Capacity l Price € Quantity scale Scale price € Item no.from4 piece set 0,5 – 10,0 40.85 10 38.85 4201-0095 N46 piece set 0,5 – 39,0 117.55 10 111.40 4201-0100 N4189

Photographic trays | in a variety of colours and sizesPVCThick sides, shatterproofLargely resistant to acids and alkalisTemperature resistent from -30 °C up to +70°CThese photographic trays made of PVC are available in a variety of shapes andcolours. Available in shallow or deep models, with or without ribs on the base, in 3attractive, high-gloss colours: white, red and black. The model with ribs on thebase is especially well suited as a film development tray. The raised ribs preventphotographic paper from sticking to the base of the tray. Liquid can be poured outeasily from the tray edges. The model without ribs on the base is suited for universallaboratory or storage purposes. Important: the photographic trays are made ofhigh-quality PVC. We do not supply models made of simple polystyrene, which ismore usual.Profi le shape roundedWithout ribs on bottomTray base dimensionsTray top dimensionsWith ribs on bottomProfi le shape straight190www.buerkle.de | info@buerkle.de | Hotline +49 (0) 76 35 8 27 95-0

Photographic traysPhotographic trays, shallow form with ribs on bottom, profile shape roundedColour Inner dimensionOuter dimensionHeight Price € QuantityScale Item no.of baseL x W mm of rimL x B mmmmscalefromprice €white 140 x 190 180 x 230 40 6.90 5 6.30 4202-1013 N4white 190 x 260 240 x 320 50 10.40 5 9.45 4202-1018 N4white 260 x 320 320 x 370 50 16.20 5 14.90 4202-1024 N4white 310 x 410 370 x 470 60 26.85 5 23.45 4202-1030 N4white 420 x 510 480 x 580 60 51.10 5 46.45 4202-1040 N4white 510 x 610 590 x 680 70 72.50 5 65.75 4202-1050 N4red 140 x 190 180 x 230 40 6.90 5 6.30 4202-2013 N4red 190 x 260 240 x 320 50 10.40 5 9.45 4202-2018 N4red 260 x 320 320 x 370 50 16.20 5 14.90 4202-2024 N4red 420 x 510 480 x 580 60 51.10 5 46.45 4202-2040 N4red 510 x 610 590 x 680 70 72.50 5 65.75 4202-2050 N4black 190 x 260 240 x 320 50 10.40 5 9.45 4202-3018 N4black 260 x 320 320 x 370 50 16.20 5 14.90 4202-3024 N4Photographic trays, shallow form without ribs on bottom, profile shape roundedColourInner dimensionof baseL x W mmOuter Heightdimension of mmrim L x B mmPrice €QuantityscalefromScaleprice €Item no.white 110 x 160 150 x 200 30 5.75 5 5.15 4203-1010 N4white 140 x 190 180 x 230 40 6.90 5 6.30 4203-1013 N4white 190 x 260 240 x 320 50 10.40 5 9.45 4203-1018 N4white 260 x 320 320 x 370 50 16.20 5 14.90 4203-1024 N4white 310 x 410 370 x 470 60 26.85 5 23.45 4203-1030 N4white 420 x 510 480 x 580 60 51.10 5 46.45 4203-1040 N4white 510 x 610 590 x 680 70 72.50 5 65.75 4203-1050 N4red 110 x 160 150 x 200 30 5.75 5 5.15 4203-2010 N4red 180 x 230 140 x 190 40 6.90 5 6.30 4203-2013 N4red 190 x 260 240 x 320 50 10.40 5 9.45 4203-2018 N4red 260 x 320 320 x 370 50 16.20 5 14.90 4203-2024 N4red 310 x 410 370 x 470 60 26.85 5 23.45 4203-2030 N4red 510 x 610 590 x 680 70 72.50 5 65.75 4203-2050 N4black 110 x 160 150 x 200 30 5.75 5 5.15 4203-3010 N4black 140 x 190 180 x 230 40 6.90 5 6.30 4203-3013 N4black 190 x 260 240 x 320 50 10.40 5 9.45 4203-3018 N4black 260 x 320 320 x 370 50 16.20 5 14.90 4203-3024 N4black 310 x 410 370 x 470 60 26.85 5 23.45 4203-3030 N4black 510 x 610 590 x 680 70 72.50 5 65.75 4203-3050 N4Photographic trays, deep form with ribs on bottomColour Innerdimensionof base L xW mmOuterdimensionof rimL x B mmHeightmmProfileshapePrice€QuantityscalefromScaleprice€Item no.white 310 x 410 430 x 530 105 straight 34.70 5 31.55 4206-1030 N4white 420 x 510 520 x 610 110 straight 61.15 5 54.90 4206-1040 N4white 510 x 610 630 x 730 110 straight 86.45 5 79.45 4206-1050 N4red 310 x 410 430 x 530 105 straight 34.70 5 31.55 4206-2030 N4red 420 x 510 520 x 610 110 straight 61.15 5 54.90 4206-2040 N4black 420 x 510 520 x 610 110 straight 61.15 5 54.90 4206-3040 N4black 510 x 610 630 x 730 110 straight 86.45 5 79.45 4206-3050 N4Photographic trays, deep form without ribs on bottomColourInner dimensionof base Lx W mmOuterdimensionof rim L xB mmHeightmmProfileshapePrice€QuantityscalefromScaleprice €Item no.white 190 x 260 260 x 340 85 rounded 15.85 5 14.70 4207-1018 N4white 260 x 320 330 x 390 100 rounded 25.55 5 23.35 4207-1024 N4white 310 x 410 430 x 530 105 straight 34.70 5 31.55 4207-1030 N4white 420 x 510 520 x 610 110 straight 61.15 5 54.90 4207-1040 N4white 510 x 610 630 x 730 110 straight 86.45 5 79.45 4207-1050 N4red 190 x 260 260 x 340 85 rounded 15.85 5 14.70 4207-2018 N4red 260 x 320 330 x 390 100 rounded 25.55 5 23.35 4207-2024 N4red 310 x 410 430 x 530 105 straight 34.70 5 31.55 4207-2030 N4red 420 x 510 520 x 610 110 straight 61.15 5 54.90 4207-2040 N4red 510 x 610 630 x 730 110 straight 86.45 5 79.45 4207-2050 N4black 310 x 410 430 x 530 105 straight 34.70 5 31.55 4207-3030 N4black 420 x 510 520 x 610 110 straight 61.15 5 54.90 4207-3040 N4black 510 x 610 630 x 730 110 straight 86.45 5 79.45 4207-3050 N4191

Instrument traysInstrument serversTrays for various uses: in laboratories, doctors’ surgeries, hospitals,pharmacies, the foodstuffs industry – wherever there is a need forclean storage of instruments, equipment, goods and precision parts.192Melamine, whiteTray without lid, autoclavableLid available as accessoryInstrument traysCapacity L x W x H mm Price € Quantity scale Scale price € Item no.mlfrom500 210 x 110 x 35 8.30 5 7.60 4230-2050 N3700 190 x 150 x 40 6.55 5 5.90 4230-2070 N31000 290 x 160 x 35 8.85 5 8.10 4230-2100 N31800 290 x 160 x 60 14.40 5 13.25 4230-2180 N32300 350 x 250 x 40 17.25 5 15.75 4230-2230 N35500 350 x 250 x 100 21.75 5 19.80 4230-2550 N3AccessoriesDescription Price € Item no.Lids for instrument trays 500 ml, PS crystal clear 5.75 4230-2051 N3Lids for instrument trays 700 ml, PS crystal clear 7.50 4230-2071 N3Lids for instrument trays 1000/1800 ml, PS crystal clear 8.50 4230-2101 N3Lids for instrument trays 2300/5500 ml, PS crystal clear 11.15 4230-2231 N3Servers for various uses - wherever there is a need for clean storageof instruments, equipment, goods and precision parts.Melamine, whiteInstrument serversL x W x H mm Price € Quantity scale Scale price € Item no.from190 x 150 x 17 4.88 10 4.55 4230-3019 N3240 x 180 x 17 6.55 10 6.00 4230-3024 N3268 x 208 x 17 8.60 10 8.00 4230-3027 N3355 x 240 x 17 12.65 10 11.60 4230-3036 N3428 x 288 x 17 21.30 5 19.45 4230-3043 N3www.buerkle.de | info@buerkle.de | Hotline +49 (0) 76 35 8 27 95-0

Bowls sterilisableFour-sided bucketBucket made of PPParticularly stable bowl, with wide holdingedge, can be stacked, substances which solidifyin the bowl can easily be removed.Bucket for transporting bulky goods. Savesspace, sturdy, easy to carry, available withlid.Bucket for transporting, decanting and mixing.Safe emptying with wide spout. Sturdyhandle made of PP.PP, whiteSterilisable up to +121°CPE, transparentGraduation 500 ml, up to 12 lWith sturdy handle made of PEContents right to the top 14 lPP, transparentWith contents scale, graduation 1000 mlWith spoutSterilisableBowls sterilisableCapacitylDia.mmHeightmmPrice€QuantityscalefromScaleprice€Item no.1 160 70 1.90 5 1.73 4702-0008 N32 200 80 2.65 5 2.58 4702-0017 N33 240 100 4.03 5 3.62 4702-0028 N34 280 120 5.90 5 5.20 4702-0045 N37 320 130 8.20 3 7.50 4702-0065 N313 400 180 12.80 3 11.70 4702-0013 N3Four-sided bucketCapacityl HL x W x Price €mmQuantityscalefromScaleprice €Item no.14 280 x 22.05 10 20.15 2350-0140 N3280 x290AccessoriesDescription Price € Item no.Lid for four-sided bucket 8.75 2350-0141 N3Bucket made of PPCapacitylDia.mmHeightmmPrice€QuantityscalefromScaleprice€Item no.12 310 300 24.85 10 22.45 2306-1012 N315 300 340 27.25 10 24.85 2306-1015 N3193

Laboratory bucketIndustrial bucket with metal handleLaboratory bucket for transporting, decanting and mixing. Safeemptying with wide spout. Handle made of metal.Industrial bucket for transporting, decanting and mixing. Safe emptyingwith wide spout. Handle made of metal.PE, whiteWith contents scale, graduation 1000 mlWith spoutLLDPE, whiteWith litre scale, graduation 1000 mlWith spoutLaboratory bucketCapacity l Dia. mm Height mm Price € Quantity Scale Item no.scale from price €10 290 280 24.15 10 23.50 2306-0010 N315 320 340 35.75 10 32.45 2306-0015 N3194Industrial bucket with metal handleCapacity l Dia. mm Height mm Price € Quantity Scale Item no.scale from price €9 280 250 9.20 10 8.30 2308-0900 N312 300 280 12.20 10 10.95 2308-1200 N317 340 310 17.70 10 15.90 2308-1700 N3www.buerkle.de | info@buerkle.de | Hotline +49 (0) 76 35 8 27 95-0

Bucket HDPEPackaging bucketFor transporting, decanting and mixing. Wide spoutgives rapid but safe emptying. With plastic handle.HDPE, white or blackWith litre scale, graduation 1000 mlWith spoutPackaging bucket for transport, packaging and storing of various materials. Suitablefor the food or building material industries and non-aggressive chemicals inenvironmental protection, hospitals and the household. With strong handle. Qualityclosure on the bucket for product safety. PP, white Air-tight closure Complete with lid With advertising printing in large quantities on requestBulk pricesBucket HDPECapacitylColour Dia.mmHeightmmPrice € QuantityscalefromScaleprice€Item no.10,5 black 286 289 16.05 10 14.50 2307-0010 N310,5 white 286 283 18.10 10 16.25 2307-0011 N317 black 330 315 19.25 10 17.25 2307-0017 N317 white 330 315 21.60 10 19.35 2307-0018 N3Packaging bucketCapacity l Dia. top mm Height with Price € Quantity scale Scale price € Item no.cap mmfrom1 132 131 1.21 100 1.09 2327-0001 N32 175 132 1.90 80 1.75 2327-0020 N33 225 123 2.40 45 2.18 2327-0030 N35 225 194 3.06 36 2.71 2327-0050 N310 268 263 4.09 25 3.74 2327-0010 N3195

Draining rack, wallmount | practical, hygienic, attractive shapeDraining rack made of plastic, shatterproof, proven thousands oftimes in the lab and adjusted to the requirements there.The stable rods are individually placed into the holes of the drainingrack and are clicked into place. Their positions can be changed atany time. Using a combination of rods of three different lengths (60mm, 100 mm and extension to 150 mm), the draining rack can beadapted to any apparatus which is to be dried.Available in three different sizes: Draining rack 40x40 cm with rods 60 mm (5x), 100 mm (26x)and 150 mm (2x) Draining rack 50x50 cm with rods 60 mm (10x), 100 mm (39x)and 150 mm (4x) Draining rack 60x60 cm with rods 60 mm (15x), 100 mm (56x)and 150 mm (6x)Extension Item No. 9640-0415 can only be used with rod Item No.9640-0410.Available as: Draining rack, wallmount , incl. wall mounting set (screws, dowels),optionally available with removable draining channel whichhas a connection for a draining tube (The drainage water goesinto the lab basin). Draining rack, benchtop, with collecting panDraining rack PVC, rods PPIncl. spanner for the rodsAttention! Make sure to pay attention to the “List of ChemicalResistance“!Draining rack, wallmountModel W x H mm Price € Quantity Scale Item no.scale from price €without draining channel 400 x 400 134.75 3 123.20 9640-1040 N4without draining channel 500 x 500 160.05 3 147.35 9640-1050 N4without draining channel 600 x 600 185.45 3 166.90 9640-1060 N4with draining channel 400 x 400 155.45 3 143.95 9640-2040 N4with draining channel 500 x 500 185.45 3 166.90 9640-2050 N4with draining channel 600 x 600 211.85 3 193.45 9640-2060 N4AccessoriesDescription Price € Item no.Rods for draining rack length 60 mm, dia. 6 mm 0.98 9640-0421 N4Rods for draining rack length 100 mm, dia. 10 mm 0.98 9640-0410 N4Rods for draining rack length 150 mm, dia. 12 mm 1.32 9640-0415 N4196www.buerkle.de | info@buerkle.de | Hotline +49 (0) 76 35 8 27 95-0

Draining rack, benchtopTest-tube racksThe draining rack is easy and flexible to set down on a table orworking surface. Two large supports with wide bases ensure sufficientstability. Since both sides of the draining board can be used, itprovides twice the hanging space. The collecting pan can simply beremoved for emptying.Flexible, can be used on both sidesUniversal test tube rack with retention system. Allows all test tubesto be emptied simultaneously. Suitable for test tubes in most standarddiameters. Alphanumerically marked positions for specific identificationof samples. Test tube rack with 24 storing positions withoutretention system.PP, coloured, shatterproofSteam sterilisable up to +121°CDimensions: 246 x 104 x 64 mmDraining rack, benchtopW x H mm Price € Quantity scale Scale price € Item no.from400 x 400 155.45 3 143.95 9640-3040 N4500 x 500 185.45 3 166.90 9640-3050 N4600 x 600 211.85 3 193.45 9640-3060 N4AccessoriesDescription Price € Item no.Rods for draining rack length 60 mm, dia. 6 mm 0.98 9640-0421 N4Rods for draining rack length 100 mm, dia. 10 mm 0.98 9640-0410 N4Rods for draining rack length 150 mm, dia. 12 mm 1.32 9640-0415 N4Test-tube racksFor tubes Colour No. of Price € Quantity Scale Item no.up to ...dia. mmtubesscale from price €16 white 60 10.00 5 9.45 9635-0021 N316 blue 60 10.00 5 9.45 9635-0025 N320 white 40 10.00 5 9.45 9635-0031 N320 red 40 10.00 5 9.45 9635-0032 N320 blue 40 10.00 5 9.45 9635-0035 N325 white 24 12.10 5 11.45 9635-0041 N325 red 24 12.10 5 11.45 9635-0042 N325 blue 24 12.10 5 11.45 9635-0045 N3197

Titrating burette automaticBurette with Schellbach stripes type Schilling / Bürklewith original Bürkle dosing armature.A universal aid in the laboratory, electroplating industry,water treatment plants, for field analyses, etc.Precise dosing using the press button, exact fine titrationwith the micro-screw and precise discharge jet.Graduation according to Category B (Tolerances accordingto DIN ISO 385).Adjusted for ExBurette made of borosilicate glass 3.3Shatterproof, resistant to chemicalsBlue ring graduations (Colordur)Left or right hand operation possibleSturdy standPrecise discharge jet, allowing very fine dropsParts in contact with the medium: PE, latex, borosilicateglassAttention! Make sure to pay attention to the“List of Chemical Resistance“!Titrating burette automaticBurette Division ml Precision ml Height cm Price € Quantity Scale price € Item no.capacity mlscale from5 0.05 ± 0,015 48 44.65 10 40.15 9695-1005 N410 0.05 ± 0,030 57 44.65 10 40.15 9695-1010 N415 0.10 ± 0,045 49 44.65 10 40.15 9695-1015 N425 0.10 ± 0,045 61 44.65 10 40.15 9695-1025 N450 0.10 ± 0,045 87 52.10 10 46.90 9695-1050 N4198www.buerkle.de | info@buerkle.de | Hotline +49 (0) 76 35 8 27 95-0

Titrating burette plasticTitrating apparatus accordingto Dr. Schilling,consisting of plasticcoated burette made ofborosilicate glass 3.3,Category B (Tolerancesaccording to DIN ISO385), with Schellbackstripes and high-contrastblack labelleling. Storagebottle made of LDPE withbase made of HDPE andimmersion tube made ofPP.Adjusted for ExBottle contents 1000mlDispenser, bottle attachmentQuick and simple volume setting with practical setscrew.Volume scale particularly easy to read. Can befreely rotated on the bottle through 360°. No dripswhen the tip cover is attached. A direct displacementpiston with PFA seal reduces liquid crystallisation andprevents the piston from seizing up. If the glass cylindershould break, spraying risk is reduced by its plasticencasement. Highest degree of chemical resistancedue to use of high-quality materials (PTFE, PFA, FEP,borosilicate glass, platinum-iridium). Can be easilydismantled for cleaning. The bottle attachment iscompletely autoclavable at 121 °C. Dispenser alsoavailable with innovative backdosing valve for ventingin closed systems (no reagent loss). Medium-specificreadjustment by turning the adjustment device.Error tolerance < 0,5 % according to DIN EN ISOCertificate of conformity according to DIN 12600Including three thread adapters PPTelescopic suction tube (steplessly adjustable)Titrating burette plasticBurette Precision ml Division ml Price € Item no.capacity ml25 0,05 0,05 80.60 9695-3025 N250 0,1 0,1 89.20 9695-3050 N2Dispenser, bottle attachmentModel Volume ml Division Thread Adapter Price € Item no.ml GL mmwith back-dosing valve 1,0 - 10,0 0,2 32 GL28/45/S40 283.25 7559-0011 N2with back-dosing valve 2,5 - 25,0 0,5 45 GL32/38/S40 366.00 7559-0012 N2with back-dosing valve 5,0 - 50,0 1 45 GL32/38/S40 398.25 7559-0013 N2without back-dosing valve 0,5 - 5,0 0,1 32 GL28/45/S40 245.15 7559-0020 N2without back-dosing valve 1,0 - 10,0 0,2 32 GL28/45/S40 245.15 7559-0021 N2without back-dosing valve 5,0 - 50,0 1 45 GL32/38/S40 352.15 7559-0023 N2199

Funnels | transparent, available in many different sizesFunnels with suspension eyeletfor safe filling of containers.Fine sieve made of aluminiumavailable as accessoryGeneral purpose funnels PP/PEFiller opening Outlet Material Price € Quantity Scale Item no.dia. mm dia. mmscale from price €40 5 PP 0.51 24 0.48 9602-0040 N360 8 PE 0.78 12 0.71 9602-0060 N380 11 PE 0.89 12 0.80 9602-0080 N3100 10 PP 1.38 12 1.25 9602-0100 N3120 13 PP 1.81 12 1.63 9602-0120 N3140 16 PE 2.34 12 2.14 9602-0140 N3160 18 PE 2.83 12 2.54 9602-0160 N3AccessoriesDescription Price € Item no.Funnel stand for 2 funnels 43.50 9622-0200 N4Funnel stand for 4 funnels 116.35 9622-0400 N4Barrel funnels PP/PEFiller openingdia.mmOutlet dia.mmMaterial Price € Quantityscale fromScaleprice €Item no.200 22 PP 6.30 6 5.70 9602-0200 N3250 30 PP 10.85 6 9.80 9602-0250 N3350 35 PP 21.95 5 20.05 9602-0350 N3400 42 PE 51.90 5 50.25 9602-0400 N3450 37 PE 73.75 5 64.50 9602-0450 N3AccessoriesDescription Price € Item no.Sieve for barrel funnels 200/250 mm 2.37 9602-0251 N3200www.buerkle.de | info@buerkle.de | Hotline +49 (0) 76 35 8 27 95-0

Powder funnels PP/PEFunnel standPowder funnel for safe filling of containers. 9606-0240 with fine sieve made ofphosphor-bronze.Powder funnels PP/PEFiller opening Outlet dia. mm Material Price € Quantity scale Scale price € Item no.dia. mmfrom80 21 PP 2.03 10 1.82 9606-0080 N3100 22 PP 2.11 10 1.89 9606-0100 N3150 28 PP 4.03 5 3.62 9606-0150 N3253 50 PE 10.20 10 9.20 9606-0240 N3350 65 PP 29.10 5 28.10 9606-0350 N3AccessoriesDescription Price € Item no.Funnel stand for 2 funnels 43.50 9622-0200 N4Funnel stand for 4 funnels 116.35 9622-0400 N4Funnel stand with reducing attachment for safe usefor different funnel sizes. Suitable for funnels of 40mm Ø to 160 mm Ø.PP, white, break-resistantFor 2 or 4 funnelsEach with two reducer insertsSteplessly height adjustableFunnel standModelfor 2funnelsfor 4funnelsL x W x HmmPrice € Quantityscale fromScaleprice €Item no.300 x 140 43.50 5 38.45 9622-0200 N4x 480550 x 150 116.35 5 107.10 9622-0400 N4x 500201

Buechner funnel PPSedimentation funnelSafety funnel21Easy to disassemble, shatterproof, easy to clean. Forfast vacuum filtration. The funnel diameter matchescommercially available filter papers.34PP, whiteFor filter paper Ø 240 mmNumber of holes: 150Hole Ø 3 mmSedimentation funnel, Imhoff funnel. SAN, crystal clear Shatterproof With emptying stopper DIN 12672 Graduated up to 1000 mlSafety funnel for filling containerseasily. With overflow protection.made of stainless steel V2AFlame blockConnector 2” fine thread NPTDischarge pipe Ø 3.5 cm1Buechner funnel PPOutlet dia. Price € Quantity Scale price € Item no.mmscale from25 70.25 5 62.25 9609-0240 N32 Sedimentation funnelModel Price € Quantity scale from Scale price € Item no.Funnel, single 28.65 3 25.95 7118-1000 N33Stand for sedimentation funnelL x W x H mm Price € Quantity scale from Scale price € Item no.300 x 220 x 450 79.45 3 73.75 7118-2000 N34Safety funnel stainless steelPrice €Item no.232.55 2601-9900 N2202www.buerkle.de | info@buerkle.de | Hotline +49 (0) 76 35 8 27 95-0

Graduated beakers with handleGraduated beakers with handle,transparent graduationGraduated beakers madeof PP are virtually indestructibleand highlytransparent.Graduated beakers areperfectly suited as advertisingmeans for chemicalproducts. The smoothsurface enables print of alogo or an advertisingslogan.Graduated beakers with handle,blue graduationPP, transparentWith indestructible graduationGraduated beakers with handle, blue graduationCapacitymlDia. topmmDia. bottommmHeightmmPrice €QuantityscalefromScaleprice €Item no.100 50 40 80 1.47 24 1.44 7104-0100 N3250 70 50 120 2.70 12 2.46 7104-0250 N3500 91 75 133 3.11 12 2.79 7104-0500 N31000 116 95 170 4.14 6 3.80 7104-1000 N32000 150 125 215 8.10 6 7.50 7104-2000 N33000 170 120 242 11.05 6 9.90 7104-3000 N35000 210 160 270 15.95 6 14.70 7104-5000 N3Graduated beakers with handle, transparent graduationCapacitymlDia. topmmDia. bottommmHeightmmPrice €QuantityscalefromScaleprice €Item no.100 50 40 80 1.26 24 1.21 7102-0100 N3250 70 50 120 2.42 12 2.22 7102-0250 N3500 91 75 133 2.70 12 2.46 7102-0500 N31000 116 95 170 3.91 6 3.50 7102-1000 N32000 150 125 215 8.10 6 7.50 7102-2000 N33000 170 120 242 11.05 6 9.90 7102-3000 N35000 210 160 270 15.95 6 14.70 7102-5000 N3203

Laboratory beakers/Griffin beakers, PPGraduated beakers, stackablePP, highly transparentBlue graduation printedonShatterproofAutoclavableLaboratory beakers according to DIN 12331 and ISO 7056 (Glass)for various uses.When bought in bulk, individual print is possible.Laboratory beakers/Griffin beakers, PPCapacityDivision Scaling Dia. mm Height Price €ml ml frommlmm204QuantityscalefromScaleprice €Item no.25 1 5 34 49 0.97 12 0.91 7122-0025 N350 5 10 43 60 1.06 12 0.98 7122-0050 N3100 5 10 51 72 1.27 12 1.17 7122-0100 N3150 5 10 58 82 1.73 12 1.60 7122-0150 N3250 5 20 70 95 1.73 6 1.60 7122-0250 N3400 10 20 80 110 2.50 6 2.42 7122-0400 N3500 50 50 88 122 2.66 6 2.41 7122-0500 N3600 25 50 93 125 2.74 12 2.50 7122-0600 N31000 50 100 108 148 4.14 6 3.80 7122-1000 N32000 100 200 140 188 7.70 6 7.00 7122-2000 N33000 200 500 174 214 15.05 4 13.70 7122-3000 N35000 500 500 185 248 19.55 4 17.70 7122-5000 N3Graduated beaker with graduation printed in blue, open handle, conical.Beakers can be stacked and therefore save space during storage.PP, transparentSterilisableShatterproofGood chemical resistanceGraduated beakers, stackableCapacitymlDivisionmlHeightmmDia. topmmPrice €QuantityscalefromScaleprice €Item no.1000 10 167 125 4.14 12 3.80 7110-1000 N32000 20 212 148 8.10 12 7.35 7110-2000 N33000 50 242 170 11.05 12 9.90 7110-3000 N3www.buerkle.de | info@buerkle.de | Hotline +49 (0) 76 35 8 27 95-0

Advertise with your good nameMany articles in this catalog are outstandingly suitable for carryingyour advertisements. No matter whether as a promotional gift or asa supplement to your own product: your name is always present.Printing subjectsCompany logos, instructions for use, advertising messages, table ofcontents, scales – we set no limits to your fantasies or wishes.ColorsWe can print in all the usual color scales such as RAL, Pantone, HKSor to your color sample.Printing areaThe area that can be printed depends on the particular product. Wewill be pleased to advise you.CostsWe treat each print job individually. As each print job is different, wealways make a se pa rate offer for each inquiry. The total cost ismade up of the price of the product, preliminary costs (finalizing theartwork and making the screen) and printing costs.Printable products Pressure atomiser (page 158) Photographic trays (page 188) Buckets (page 193) Measuring scoops (page 135) Bottles (page 148) Flow indicators (page 218)ResistanceThe printing is resistant to weak acids and alkalis, and to most solvents.It is very resistant to both mechanical damage and light. Youradvertising message will not fade even after many years of use.From artwork to print1. You send us your copy or artwork – we can process virtually anydata format.2. On request we can also support you with your a layout.3. After a few days you will receive a proof sheet for your acceptance.4. In our works your advertising message will be permanently appliedin topquality.205

Graduated cylinders, tall formGraduated cylinders, PPGraduated cylinders, PP12PP, highly transparentCategory B (DIN 12681 / ISO 6706)Embossed blue graduation with rings atthe main pointsShatterproof at room temperatureAdjusted to “In”PP, highly transparentCategory B (DIN 12681 / ISO 6706)Embossed transparent graduation withrings at the main pointsShatterproof at room temperatureAdjusted to “In”Measuring cylinder, tall shape, according toDIN 12 680(Glass)/ISO 6706, with hexagonalbase. For use in laboratories, chemists, inworkshops, during outdoor field work andwherever volumetric measurements have tobe made during production.1 Graduated cylinders made of PP, tall-form with embossed blue graduationsCapacity ml Division ml Outer dia. Stand dia. Height mm Price € Quantity scale from Scale price € Item no.mm mm50 1 27 55 200 4.62 12 4.26 7503-0050 N3100 1 33 65 250 6.00 12 5.40 7503-0100 N3250 2 44 75 315 9.30 6 8.50 7503-0250 N3500 5 58 95 360 12.35 6 11.25 7503-0500 N31000 10 69 125 440 16.75 6 15.25 7503-1000 N32000 20 97 160 482 30.15 3 27.40 7503-2000 N32 Graduated cylinders made of PP, tall-form with embossed graduationsCapacity ml Division ml Outer dia. Stand dia. Height mm Price € Quantity Scale price € Item no.mm mmscale from50 1 27 55 200 2.56 12 2.32 7502-0050 N3100 1 33 65 250 3.35 12 2.93 7502-0100 N3250 2 44 75 315 5.45 6 5.00 7502-0250 N3500 5 58 95 360 7.50 6 6.80 7502-0500 N31000 10 69 125 440 10.20 6 9.20 7502-1000 N32000 20 97 160 482 23.05 3 20.95 7502-2000 N3206www.buerkle.de | info@buerkle.de | Hotline +49 (0) 76 35 8 27 95-0

Graduated cylinders, tall-form, made of PMPGraduated cylinders, tall-form, made of SANPMP, crystal clearCategory A (DIN 12681 / ISO 6706)Embossed graduation with rings at the main pointsAutoclavableShatterproof at room temperatureAdjusted to “In”SAN, crystal clearCategory B (DIN 12681 / ISO 6706)Embossed graduation with rings at the main pointsAdjusted to “In”Graduated cylinders, tall-form, made of PMPCapacityDivision Outer Stand Height Price €ml ml dia.mmdia.mmmmQuantityscalefromScaleprice €Item no.100 1 34 65 260 6.30 12 5.80 7510-0100 N3500 5 61 95 350 14.80 6 13.30 7510-0500 N31000 10 76 125 415 22.70 6 20.70 7510-1000 N3Graduated cylinders, tall-form, made of SANCapacityDivision Outer Stand Height Price €ml ml dia.mmdia.mmmmQuantityscalefromScaleprice €Item no.100 1 34 65 260 6.70 12 6.10 7506-0100 N3500 5 61 95 350 14.20 6 12.80 7506-0500 N31000 10 76 125 415 17.15 6 15.65 7506-1000 N3207

Measuring jugs industrialLight and handy polypropylene measuring jug is suitablefor industrial applications.Measuring jug industrial, with closed handleCapacity ml Dia. mm Height mm Division ml Price € Quantity Scale price € Item no.scale from500 90 135 10 2.63 16 2.37 7204-0500 N31000 117 165 10 3.53 12 3.18 7204-1000 N32000 151 206 20 6.61 12 5.95 7204-2000 N33000 175 238 50 8.61 10 7.75 7204-3000 N35000 203 257 100 12.01 5 10.81 7204-5000 N3Measuring jug industrial, stackingCapacity ml Dia. mm Height mm Division ml Price € Quantity Scale price € Item no.scale from500 90 135 10 2.63 16 2.37 7210-0500 N31000 117 165 10 3.53 12 3.18 7210-1000 N32000 151 206 20 6.61 12 5.95 7210-2000 N33000 175 238 50 8.61 10 7.75 7210-3000 N35000 203 257 100 12.01 5 10.81 7210-5000 N3AccessoriesDescription Price € Item no.Cover for 1000-ml measuring jug 1.79 7204-0001 N3Cover for 2000-ml measuring jug 1.97 7204-0002 N3The measuring jug has two measuring scales, embossedtransparent and with blue lettering. With ergonomichandle, available in closed design for specialstability or with open handle for stacking to save space.The measuring jug is made of polypropylene and istherefore highly resistant to acids, bases and chemicals.PP transparentWith embossed graduation printed in bluePractical cover available as accessoryPlease inquire about special prices for largequantities!208www.buerkle.de | info@buerkle.de | Hotline +49 (0) 76 35 8 27 95-0

Universal graduated beakersGunda Eckert,Area Sales Manager Export:“ With a closed handle or stackable?With cover or without?For lab or industry?– We give you the choices,the decision is yours!”Universal graduated beakers with indestructible graduation. The three speciallyformed spouts enable easy pouring of liquids. Due to great pricing, they can alsobe used as disposable graduated beakers.PP, transparent, autoclavableSpace-saving stacking in one anotherAttention! Make sure to pay attention to the “List of Chemical Resistance“!Universal graduated beakersCapacity ml Dia. bottom Dia. top mm Division ml Price € Quantity Scale price € Item no.mmscale from50 31 45 5 0.34 100 0.31 7109-0050 N3100 38 55 10 0.42 100 0.36 7109-0100 N3250 48 75 10 0.76 100 0.72 7109-0250 N3400 51 83 20 0.96 100 0.90 7109-0400 N31000 72 113 50 1.63 100 1.47 7109-1000 N3209

Volumetric flasks PPVolumetric flasks PMPErlenmeyer flasksVolumetric flasks with screw cap madeof PP, Category B according to DIN12664 (Glass)/ISO 1042, highly transparentwith adjusted marking ring.ShatterproofAutoclavableVolumetric flasks PPVolumetric flask with NS stopper CategoryA according to EN ISO 1042 (Glass),crystal clear, with individually adjustedmarking ring, NS stopper made of PP, withlot number printed on and certificate. Shatterproof AutoclavableCapacity ml Thread GL Height mm Dia. mm Price € Quantity Scale price € Item no.mmscale from50 18 150 48 8.60 6 8.00 7162-0050 N3100 18 180 60 9.30 6 8.50 7162-0100 N3250 25 235 80 11.60 5 10.70 7162-0250 N31000 25 310 125 13.80 3 12.55 7162-1000 N3Volumetric flasks PMPCapacity ml GGJ Height mm Dia. mm Price € Quantity Scale price € Item no.scale from50 10/19 150 48 11.70 6 10.85 7165-0050 N3100 14/23 180 60 13.10 6 12.95 7165-0100 N3250 19/26 235 80 16.75 5 16.20 7165-0250 N3500 19/26 270 100 17.25 4 16.90 7165-0500 N31000 24/29 310 125 20.05 3 19.45 7165-1000 N3Erlenmeyer flasks, wide-necked, with tighly closingscrew cap made of PP. Shatterproof and sterilisable.PP, highly transparentCan also be closed with an NS stopperErlenmeyer flasksCapacitymlThreadGLmmHeightmmDia.mmPrice € QuantityscalefromScaleprice€Item no.100 40 110 65 4.32 6 3.97 7166-0100 N3250 52 150 85 6.20 6 5.70 7166-0250 N3500 52 180 105 7.35 6 6.55 7166-0500 N3210www.buerkle.de | info@buerkle.de | Hotline +49 (0) 76 35 8 27 95-0

Graduated/ single mark pipettesSingle-use pipettes Disposable pipettes LDPEPP, transparentBlue, permanentlycoloured graduationand labellingPP, transparentBlue, permanentlycoloured graduationand labellingPolystyrene, crystalclearIndividually sterilepackedFor aqueous solutionsLDPEdropping pipette, not graduatedGraduated pipettesCapacity ml Price € Quantity scale from Scale price € Item no.10 8.20 12 7.50 7550-0010 N3Single mark pipettesCapacity ml Price € Quantity scale from Scale price € Item no.10 12.20 10 12.00 7553-0010 N325 13.30 12 12.65 7553-0025 N350 12.90 12 12.55 7553-0050 N3Single-use pipettes PSCapacity ml Price € Quantity scale from Scale price € Item no.25 1.73 100 1.38 7556-0025 N350 3.78 50 3.02 7556-0050 N3100 16.30 20 13.00 7556-0100 N3Disposable pipettes LDPECapacitymlLengthmmPiecesperpackPrice €QuantityscalefromScaleprice €Item no.1,8 98 100 17.55 10 15.80 7555-0001 N41,7 145 100 17.55 10 15.80 7555-0002 N42,4 155 100 17.55 10 15.80 7555-0003 N4211

Pi-Pump | safety pipette controllerSafety pipetting-ballEvacuating thepipetting ballDrawing in theliquidDispensing thepipetting ballPurging thepipetting ballPeleus ball, simple pipetting aid. Evacuation takesplace via an automatic valve. By pressing the valves,the liquid is drawn up, dispensed or purged. The removableautomatic valve also enables effective cleaningof the inside.Suction via handwheel. If the handwheel is stopped,the piston remains in place and no liquid flows outDischarge via outlet lever. Very small quantities canbe removed with great accuracy by turning thehandwheelFor all pipettes up to 100 mlAvailable in various coloursProven thousands of time, fits naturally into the hand. The handwheel ensures precisesuction. The contents can be purged by pressing back the piston. Dispensingwith the lateral switch.Easy to use, preciseAvailable in three sizes (colour-coded)Pi-PumpFits for pipette up Colour Price € Quantity scale Scale price € Item no.to ... mlfrom2 blue 11.25 10 10.20 7551-0002 N310 green 11.25 5 10.20 7551-0010 N325 red 12.35 5 11.15 7551-0025 N3Safety pipetting-ballColour Price € Quantity Scale price € Item no.scale fromred 13.25 10 12.45 7554-0002 N3yellow 13.25 10 12.45 7554-0004 N3blue 13.25 10 12.45 7554-0005 N3green 13.25 10 12.45 7554-0006 N3212www.buerkle.de | info@buerkle.de | Hotline +49 (0) 76 35 8 27 95-0

Pipette stand | rotatablePipette rinsing system2 342 Pipette rinsing systemFor easy and gentle cleaning and safe storage of pipettes. A complete system suitablefor every lab.PE transparentEffective height 600 mm3 Pipette basketThe basket is an accessory for the pipette rinser.1Pipette stand for 94 pipettes of different sizes. Baseplatewith raised edge which catches dripping liquid.The delicate pipette tips are placed in a rotatablebase-plate with conical grooves PP Sterilisable up to 121°C1 Pipette standPrice € Quantity scale from Scale price € Item no.43.70 3 40.85 9630-0090 N32 Pipette rinsing systemCapacity l Inner dia. Stand dia. Height mm Price € Quantity Scale price € Item no.mm mmscale from17 165 315 740 169.25 5 153.20 9650-0650 N33Pipette basketCapacity l Stand dia. mm Height mm Price € Quantity scale Scale price € Item no.from17 145 280 32.95 4 30.00 9650-0653 N34 Cleaning and storage container for pipettesCapacity l Inner dia. Outer dia. Stand dia. Height Price € Quantity Scale Item no.mm mm mm mmscale from price €10 155 165 240 550 77.20 5 70.25 9650-0651 N312,5 155 165 240 660 76.10 5 67.90 9650-0652 N3213

PVC industrial tubingPVC pressure tubingHose made of soft PVC, cadmium-free, with high resistance tochemicals, high flexibility and permanent crystal clear transparencyand excellent abrasion resistance. Foodstuffs quality according tothe EC Guideline 1935/2004. Clear Hardness Shore A 80 ± 3 Operating temperature -20°C to +50°C, for pressureless operationPVC industrial tubingInner dia. mm Roll length m Outer dia. mm Wall thickness Item no. Price €mm2 10 4 1 8801-0204 4.77 N32 100 4 1 8875-0204 10.85 N33 10 5 1 8801-0305 5.80 N33 100 5 1 8875-0305 14.80 N34 10 6 1 8801-0406 6.90 N34 100 6 1 8875-0406 16.95 N35 10 7 1 8801-0507 7.50 N35 100 7 1 8875-0507 20.30 N36 10 8 1 8801-0608 8.10 N36 100 8 1 8875-0608 24.25 N37 10 10 1,5 8801-0710 11.15 N37 100 10 1,5 8875-0710 43.50 N38 10 11 1,5 8801-0811 11.45 N38 50 11 1,5 8875-0811 24.75 N39 10 12 1,5 8801-0912 11.60 N39 50 12 1,5 8875-0912 25.45 N310 10 13 1,5 8801-1013 12.80 N310 50 13 1,5 8875-1013 29.35 N312 10 16 2 8801-1216 17.25 N312 50 16 2 8875-1216 44.55 N313 10 19 3 8801-1319 23.95 N313 50 19 3 8875-1319 73.75 N319 10 25 3 8801-1925 31.05 N319 50 25 3 8875-1925 100.25 N3AccessoriesDescription Price € Item no.Hose cutter 7.00 0006-9506 N3214Fabric reinforced, permanent transparency, increased flexibility, highchemical resistance, excellent ageing and abrasion resistance, environmentallyfriendly, cadmium-free. Foodstuffs quality according tothe EC Guideline 1935/2004.ClearHardness Shore A 70 ± 3Operating temperature -20°C to +60°CTÜV-approved (German industry standards)PVC pressure tubingInner dia. Roll length Outer dia. Wall thicknessPressure Price € Item no.mm m mmmm max. bar6 10 12 3 20 15.55 8802-0612 N36 50 12 3 20 41.75 8876-0612 N38 10 14 3 18 17.90 8802-0814 N38 50 14 3 18 50.55 8876-0814 N39 10 15 3 16 19.20 8802-0915 N39 50 15 3 16 55.20 8876-0915 N310 10 16 3 14 20.60 8802-1016 N310 50 16 3 14 61.15 8876-1016 N312 10 18 3 14 25.10 8802-1218 N312 50 18 3 14 79.45 8876-1218 N313,2 10 20 3,3 12 26.95 8802-1320 N313,2 50 20 3,3 12 92.15 8876-1320 N3AccessoriesDescription Price € Item no.Hose cutter 7.00 0006-9506 N3www.buerkle.de | info@buerkle.de | Hotline +49 (0) 76 35 8 27 95-0

PE tubingPTFE tubingThe PE hose is recognised as safe physiologically, resistant against(non-oxidizing) acids, caustic solutions, salts and a number of solvents,pressure resistant, flexible, impact resistant, light, resistant tocompression, up to + 80 °C deformation resistant.TransparentHardness Shore A 80 ± 3Temperature -40°C to +95°CSuitable for foodExcellent properties: Extremely high chemical resistance againstnearly all chemicals, smallest frictional coefficient, excellent antiadhesivequalities/residue emptying. PTFE hoses do not emit odours,do not burn or smoke and are resistant to ageing and UV light. Notresistant to fluorine compounds or strong reducing agents.TransparentHardness: Test according to ASTM D55Temperature -200°C to +260 °CAutoclavable, ethylene oxideFlavour and odour neutralPE tubingInner dia. Roll length Outer dia. Wall thicknessPressure Price € Item no.mm m mmmm max. bar3 10 5 1 13 8.18 8805-0305 N33 100 5 1 13 24.15 8878-0305 N34 10 6 1 10 9.05 8805-0406 N34 100 6 1 10 30.15 8878-0406 N36 10 8 1 7 13.35 8805-0608 N36 100 8 1 7 41.95 8878-0608 N310 10 14 2 8 26.70 8805-1014 N310 100 14 2 8 145.85 8878-1014 N312 10 16 2 7 30.75 8805-1216 N3AccessoriesDescription Price € Item no.Hose cutter 7.00 0006-9506 N3PTFE tubingInner dia. Roll length Outer dia. Wall thicknessPressure Price € Item no.mm m mmmm max. bar1 5 3 1 240 16.20 8804-0103 N31 50 3 1 240 101.00 8879-0103 N32 5 4 1 120 20.85 8804-0204 N32 50 4 1 120 136.80 8879-0204 N33 5 5 1 80 26.35 8804-0305 N33 50 5 1 80 186.70 8879-0305 N34 5 6 1 60 29.20 8804-0406 N34 50 6 1 60 208.40 8879-0406 N36 5 8 1 40 37.65 8804-0608 N36 50 8 1 40 262.35 8879-0608 N38 5 10 1 30 49.55 8804-0810 N38 50 10 1 30 353.40 8879-0810 N310 5 12 1 20 61.15 8804-1012 N310 50 12 1 20 428.25 8879-1012 N3AccessoriesDescription Price € Item no.Hose cutter 7.00 0006-9506 N3215

Silicone tubingHose cutterVery flexible, transparent hose. Good resistance against weak acidsand alkalis. Do not use for strong acids and caustic solutions. Swellsin organic solvents. Largely nonreactive to ionising solvents exceptchlorinated aliphatic and aromatic hydrocarbons.TransparentHardness Shore A 55 ± 5Temperature -60°C up to +180°CAutoclavable, ethylene oxideSuitable for foodSilicone tubingInner dia. mm Roll length m Outer dia. mm Wall thickness Price € Item no.mm3 10 5 1 17.35 8803-0305 N33 50 5 1 49.70 8881-0305 N34 10 6 1 19.65 8803-0406 N34 50 6 1 58.90 8881-0406 N35 10 8 1,5 30.45 8803-0508 N35 50 8 1,5 100.25 8881-0508 N36 10 9 1,5 34.65 8803-0609 N36 50 9 1,5 116.35 8881-0609 N37 10 10 1,5 38.80 8803-0710 N37 50 10 1,5 129.00 8881-0710 N38 10 12 2 51.50 8803-0812 N38 50 12 2 177.25 8881-0812 N310 5 15 2,5 40.95 8803-1015 N310 50 15 2,5 272.90 8881-1015 N312 5 16 2 37.45 8803-1216 N312 25 16 2 124.40 8881-1216 N3AccessoriesDescription Price € Item no.Hose cutter 7.00 0006-9506 N3Edges cut with the hose cutter are always clean and flat, even in thecase of thick hoses.Hose cutterPrice € Quantity scale from Scale price € Item no.7.00 10 6.40 0006-9506 N3216www.buerkle.de | info@buerkle.de | Hotline +49 (0) 76 35 8 27 95-0

Bürkle – A look behind the scenesThere are many ways or ordering atBürkle – but all roads lead to the Salesdepartment.Are you late again? www.buerkle.de– You can reach us around the clock!As soon as you have ordered aproduct, Production and MaterialsManagement take over personally.Are you not sure whether a product isthe right one for you? Just ask us –+49 (0) 7635 / 82795-0.Are you in a hurry?We also offer express deliveries.By the way: If your product is in stockand you order before 1.00 p.m., thepackage leaves our store the same day.217

Flow indicatorsFlow indicators give precise visual indication of theflow velocity of liquids or gases being transportedthrough hose connections. The flow indicator with impellerfunctions in both directions and in any position.The impeller starts to rotate at a flow rate about 150ml/min (liquids).For hoses with inner diameter of 6 – 11 mmPressure resistant up to 2 barLength with grommets 88 mm, height 40 mm,width 15 mmColour coding - blue, red and black218www.buerkle.de | info@buerkle.de | Hotline +49 (0) 76 35 8 27 95-0

Flow indicators LiquiMobil SANFlow indicators CheMobil PMPLiquiMobil flow indicator made of SAN is mainly suitable for coolingsystems and helps to reduce water consumption considerably becausethe cooling water flow can be adjusted better. Not suitablefor aggressive substances.Operating temperature LiquiMobil SAN max. +30°CCheMobil made of PMP/TPX can be used for many substances dueto its good chemical resistance. Not suitable for strong acids, alkalisand solvents. CheMobil can be steam sterilised.Operating temperature CheMobil PMP max. +60°CFlow indicators LiquiMobil SANColour Price € Quantity scale Scale price € Item no.fromred 9.65 10 8.85 8720-1002 N4black 9.65 10 8.85 8720-1003 N4blue 9.65 10 8.85 8720-1005 N4Flow indicators CheMobil PMPColour Price € Quantity scale Scale price € Item no.fromred 11.90 10 10.50 8720-2002 N4black 11.90 10 10.50 8720-2003 N4blue 11.90 10 10.50 8720-2005 N4219

T-connectorsY-connectorsAngled connectorsCylindrical T hose connector to connect hoses.Cylindrical Y hose connector to connect hoses.Cylindrical angle hose connector to connect hoses.PP, Temperature resistant up to +135°CPVDF, Temperature resistant up to+160°C, highly resistant to chemicalsSterilisablePP, Temperature resistant up to +135°CPVDF, Temperature resistant up to+160°C, highly resistant to chemicalsSterilisablePP, Temperature resistant up to +135°CPVDF, Temperature resistant up to+160°C, highly resistant to chemicalsSterilisableT-connectorsFordia.mmMaterialPiecesperpackPrice€QuantityscalefromScaleprice €Item no.PP 3-5 10 4.83 20 4.39 8705-0004 N4PP 5-7 10 6.00 20 5.30 8705-0006 N4PP 7-9 10 7.00 20 6.20 8705-0008 N4PP 9-11 10 8.05 20 7.30 8705-0010 N4PP 11-13 10 9.35 20 8.15 8705-0012 N4PP 13-15 10 10.80 20 9.80 8705-0014 N4PVDF 3-5 10 6.70 20 6.10 8711-0004 N4PVDF 5-7 10 8.15 20 7.40 8711-0006 N4PVDF 7-9 10 9.90 20 8.85 8711-0008 N4PVDF 9-11 10 11.10 20 10.10 8711-0010 N4PVDF 11-13 10 12.55 20 11.30 8711-0012 N4PVDF 13-15 10 14.80 20 13.25 8711-0014 N4Y-connectorsFordia.mmMaterialPiecesper €PricepackQuantityscalefromScaleprice€Item no.PP 3-5 10 7.00 20 6.20 8706-0004 N4PP 5-7 10 8.05 20 7.30 8706-0006 N4PP 6-8 10 10.20 20 9.35 8706-0007 N4PP 7-9 10 10.20 20 9.35 8706-0008 N4PP 9-11 10 11.65 20 10.60 8706-0010 N4PP 11-13 10 13.35 10 12.05 8706-0012 N4PP 13-15 10 15.45 10 14.05 8706-0014 N4PVDF 3-5 10 9.90 20 8.85 8712-0004 N4PVDF 5-7 10 11.10 20 10.10 8712-0006 N4PVDF 7-9 10 14.15 20 12.80 8712-0008 N4PVDF 9-11 10 16.25 20 14.70 8712-0010 N4PVDF 11-13 10 18.55 20 16.70 8712-0012 N4PVDF 13-15 10 21.35 10 19.25 8712-0014 N4Angled connectorsFordia.mmMaterialPiecesper €PricepackQuantityscalefromScaleprice€Item no.PP 3-5 10 3.84 20 3.50 8707-0004 N4PP 5-7 10 4.28 20 3.84 8707-0006 N4PP 7-9 10 4.51 20 4.07 8707-0008 N4PP 9-11 10 5.30 20 4.83 8707-0010 N4PP 11-13 10 6.35 20 5.80 8707-0012 N4PP 13-15 10 7.40 20 6.70 8707-0014 N4PVDF 3-5 10 5.30 20 4.83 8713-0004 N4PVDF 5-7 10 5.80 20 5.30 8713-0006 N4PVDF 7-9 10 6.10 20 5.55 8713-0008 N4PVDF 9-11 10 7.30 20 6.70 8713-0010 N4PVDF 11-13 10 8.75 10 7.80 8713-0012 N4PVDF 13-15 10 10.50 20 9.45 8713-0014 N4220www.buerkle.de | info@buerkle.de | Hotline +49 (0) 76 35 8 27 95-0

Four-way-connectorsHose tubing connectors, straightHose tubing connectorsCylindrical four-way hose connector to connecthoses.PP, transparentSterilisableCylindrical straight hose connectors for varioushose sizes. PP, Temperature resistant up to +135°C PVDF, Temperature resistant up to+160°C, highly resistant to chemicals SterilisableConical, straight hose connectors for varioushose sizes.PPSterilisableFour-way-connectorsFor dia. Price €mmPiecesperpackQuantityscalefromScaleprice €Item no.3-3,5 10 12.45 10 11.35 8708-0004 N34-5 10 13.20 10 12.10 8708-0006 N36-7 10 14.50 10 12.90 8708-0008 N38-9 10 15.85 10 14.70 8708-0010 N310-11 10 18.55 10 16.75 8708-0012 N312-13 10 20.50 10 18.75 8708-0014 N3Hose tubing connectors, straightFordia.mmMaterialPiecesper €PricepackQuantityscalefromScaleprice€Item no.PP 3-5 10 3.34 20 3.13 8701-0004 N4PP 5-7 10 4.28 20 3.84 8701-0006 N4PP 7-9 10 4.83 20 4.39 8701-0008 N4PP 9-11 10 5.45 20 4.89 8701-0010 N4PP 11-13 10 6.20 20 5.70 8701-0012 N4PP 13-15 10 7.10 20 6.45 8701-0014 N4Hose tubing connectors, straightFor dia.mmPiecesperpackPrice €QuantityscalefromScaleprice €Item no.3-5 10 5.75 10 5.15 8700-0406 N35-7 10 6.20 10 5.70 8700-0608 N37-10 10 7.60 10 6.80 8700-0810 N39-12 10 8.85 10 8.20 8700-1012 N311-14 10 10.70 10 9.70 8700-1214 N313-15 10 12.10 10 11.15 8700-1416 N3PVDF 3-5 10 4.51 20 3.94 8710-0004 N4PVDF 5-7 10 5.55 20 5.05 8710-0006 N4PVDF 7-9 10 6.45 20 5.80 8710-0008 N4PVDF 9-11 10 7.20 20 6.45 8710-0010 N4PVDF 11-13 10 8.15 20 7.40 8710-0012 N4PVDF 13-15 10 9.80 20 8.65 8710-0014 N4221

Universal hose tubing connectors Reducing hose connectorsHose couplingsConical, straight hose connectors for universaluse.Reducing nozzles for the reduction from biggerto small hoses.Attachable, conical hose couplings for pressurelessoperation.PP, Temperature resistant up to +135°CPVDF, Temperature resistant up to+160°C, highly resistant to chemicalsSterilisablePPSterilisablePEHose tubing connectorsFordia.mmMaterialPiecesper €PricepackQuantityscalefromScaleprice€Item no.PP 4-17 10 15.75 10 14.25 8700-0417 N4PVDF 4-17 10 22.60 20 20.50 8710-0417 N4Reducing hose connectorsFor dia. Price €mm4-8/8-104-8/12-168-12/12-16PiecesperpackQuantityscalefromScaleprice €Item no.10 11.70 10 10.95 8703-0408 N310 12.90 10 12.00 8703-0412 N310 14.50 10 12.90 8703-0812 N3Hose couplingsFor dia. Price €mmPiecesperpackQuantityscalefromScaleprice €Item no.3-5 10 10.95 10 10.00 8704-0406 N35-7 10 11.85 10 10.95 8704-0608 N37-10 10 14.40 10 12.65 8704-0810 N39-12 10 15.35 10 13.95 8704-1012 N311-14 10 17.80 10 16.20 8704-1214 N313-16 10 19.30 10 17.55 8704-1416 N3222www.buerkle.de | info@buerkle.de | Hotline +49 (0) 76 35 8 27 95-0

Non-return valvesMagic Box21Retaining valve with embossed directionalarrow or printed in black. With conical nozzles.Various usesResistant to compression max. 4 barOperating temperature +0 to +40 °CWith PP valve ball, on request also withball made of stainless steel or PTFENon-return valves with conical inlet/outletFor dia. Print Price QuantityScale Item no.mm€scalefromprice€1 6-8 embossed 2.45 100 2.23 8714-0060 N41 8-10 embossed 2.45 100 2.23 8714-0080 N41 10-14 embossed 3.06 100 2.42 8714-0100 N42 6-8 black 2.68 100 2.46 8714-1006 N42 8-10 black 2.68 50 2.46 8714-1008 N42 10-14 black 3.29 100 2.65 8714-1010 N4In this magic box, you can invariably findthe appropriate hose connector you arelooking for.Magic box includes 56 connectors:2 of each in sizes 4, 6, 8, 10, 12 and14 mm Straight hose connector Item No. 8701- T hose connector Item No. 8705- Y hose connector Item No. 8706- Angle hose connector Item No. 8707-Magic Box2 of each for hoses from 4 to 17 mm Universal hose connector Item No. 8700-04172 of each in sizes 4-8, 4-12, and 8-12 mm Reducing hose connector Item No. 8703-PP, shatterproof and transparentPrice € Quantity scale from Scale price € Item no.54.80 5 49.10 8715-1000 N4223

stop-it hose clampsUtilitymodelThe hose clip can be used wherever the flow in hoseswith liquids or gases needs to be regulated orstopped.Stepless flow regulation: With the hose clip stop-it’sknurled screw, a stepless, delicate flow regulation orcomplete stop of the flow are possible, even for existinghose connections. The hose is compressed over awide area against the sturdy steel hook in order toprevent it from being damaged.224www.buerkle.de | info@buerkle.de | Hotline +49 (0) 76 35 8 27 95-0

stop-it with Easy-Click closurestop-it metalEasy-Click closure - Stop-it can be opened and closedin any position - without tiresome screwing on and off.High quality material - Stop-it made from the heat resistantand chemical resistant plastic PVDF. The clampis galvanised steel. PVDF and steel, zinc coated Temperature resistent up to 160 °C For flexible hoses with outer Ø up to 10 mm,15 mm and 20 mm Available in four fresh coloursThe materials steel and aluminium ensure that theStop-it metal is extremly heat resistant and sturdy.The hose clip is available in four different sizes, forhose diameters up to max. 30 mm.Galvanised steel and aluminiumFor flexible hoses with outer Ø up to 10 mm, 15mm 20 mm and 30 mmBulk pricesstop-it with Easy-Click closureFor dia. mm Colour Price € Quantity scale from Scale price € Item no.to 10 red 2.10 50 1.89 8619-0102 N4to 10 yellow 2.10 50 1.89 8619-0104 N4to 10 blue 2.10 50 1.89 8619-0105 N4to 10 green 2.10 50 1.89 8619-0106 N4to 15 red 3.50 50 3.27 8619-0152 N4to 15 yellow 3.50 50 3.27 8619-0154 N4to 15 blue 3.50 50 3.27 8619-0155 N4to 15 green 3.50 50 3.27 8619-0156 N4to 20 red 4.42 50 4.03 8619-0202 N4to 20 yellow 4.42 50 4.03 8619-0204 N4to 20 blue 4.42 50 4.03 8619-0205 N4to 20 green 4.42 50 4.03 8619-0206 N4stop-it metalFor dia. mm Price € Quantity Scale price € Item no.scale fromup to 10 2.57 50 2.34 8619-0510 N4up to 15 4.11 50 3.66 8619-0515 N4up to 20 4.47 50 3.98 8619-0520 N4up to 30 6.80 50 6.10 8619-0530 N4225

Hose clamp Squeeze-FixHose clips POMWorm-threaded hose clipsThe hose can be squeezed in phases or completelycompressed, as required.Can be operated with one handAcetal (white, is sterilisable, does notrust, is permanently elastic, hygienic)Hose clips made of Polyacetal (POM)Hose clip sleeve made of stainless steel1.4016, screw zinc coated, with screwthread.Hose clamp Squeeze-FixFor dia. Length Price € Quantitymm mmscalefromScaleprice €Item no.1-5 25 0.53 100 0.45 8618-0001 N33-10 40 1.35 100 1.19 8618-0002 N36-15 55 1.99 100 1.80 8618-0003 N3Hose clips POMFor dia. Price €mmPiecesperpackQuantityscalefromScaleprice €Item no.6 - 6,5 10 2.75 10 2.53 8678-0006 N39 - 10 10 2.67 10 2.44 8678-0010 N310 -11 10 2.67 10 2.44 8678-0011 N311 - 12 10 2.67 10 2.44 8678-0012 N312 - 14 10 2.67 10 2.44 8678-0014 N313 - 15 10 2.67 10 2.44 8678-0015 N315 - 17 10 2.67 10 2.44 8678-0017 N317 - 19 10 2.67 10 2.44 8678-0019 N318 - 20 10 3.35 10 3.11 8678-0020 N320 - 22 10 3.35 10 3.11 8678-0022 N323 - 25 10 3.35 10 3.11 8678-0025 N3Worm-threaded hose clips stainless steelFor dia.mmPrice € Scaleprice €Item no.PiecesperpackQuantityscalefrom8-12 10 9.20 10 8.30 8677-0812 N310-16 10 9.30 10 8.40 8677-1016 N312-20 10 10.70 10 9.80 8677-1220 N316-27 10 10.95 10 9.90 8677-1625 N320-32 10 11.05 10 10.10 8677-2032 N325-40 10 11.35 10 10.40 8677-2540 N3226www.buerkle.de | info@buerkle.de | Hotline +49 (0) 76 35 8 27 95-0

Two-way valvesThree-way valvesTwo and three-way valves are used for transfer of liquids or gases inorder to release the flow, to block it or to change its direction.PVDF: excellent chemical resistance, transparent, suitable forfoodPP/PE: for industrial use, red/whiteOperating temperature: PVDF +0 up to +40 °C, PP/PE +5 up to+40 °CResistant to compression max. 1 barWith mounting plate for easy installationTwo-way valvesMaterial For dia. Nominal Price € Quantity Scale Item no.mm width mmscale from price €PP/PE 5-7 4 5.90 50 5.25 8605-0060 N4PP/PE 7-9 6 6.80 50 6.20 8605-0080 N4PP/PE 9-11 8 7.80 50 7.00 8605-0100 N4PP/PE 11-13 8 7.80 50 7.10 8605-0120 N4PVDF 5-7 4 9.80 50 8.90 8607-0060 N4PVDF 7-9 6 11.60 50 10.50 8607-0080 N4PVDF 9-11 8 13.60 50 12.00 8607-0100 N4PVDF 11-13 8 13.30 50 12.10 8607-0120 N4Three-way valvesMaterial For dia. Nominal Price € Quantity Scale Item no.mm width mmscale from price €PP/PE 5-7 4 9.80 50 8.90 8606-0060 N4PP/PE 7-9 6 11.60 50 10.50 8606-0080 N4PP/PE 9-11 8 13.55 50 12.00 8606-0100 N4PP/PE 11-13 8 13.30 50 12.10 8606-0120 N4PVDF 5-7 4 15.30 50 13.90 8608-0060 N4PVDF 7-9 6 17.25 50 15.45 8608-0080 N4PVDF 9-11 8 19.00 50 17.25 8608-0100 N4PVDF 11-13 8 18.60 50 17.05 8608-0120 N4227

Valves made of PTFE, two-way/three wayHose tubing stop-cockTwo-way / three-way valves made of solid PTFE with hose nozzles.Resistant to chemicals. Very easy connection thanks to its excellentantifriction properties. Blue handles made of PP.228Resistant to compression max. 1 barVacuum suitable up to 10 ¯¹ mmHgAutoclavableValves made of PTFE, two-way and three wayModel For dia. Nominal Price € Quantity scale Scale Item no.mm width mmfrom price €three-way valve 4,5 2 50.75 10 45.80 8610-0001 N4three-way valve 6,8 3 50.75 10 45.80 8610-0003 N4three-way valve 10 4 65.75 10 57.45 8610-0006 N4two-way valve 4,5 2 30.45 10 27.50 8610-0010 N4two-way valve 6,8 3 30.45 10 27.50 8610-0012 N4two-way valve 10 4 40.75 10 36.55 8610-0015 N4Simple reflux nozzle with two-sided hose nozzle.HDPE naturalResistant to acids and chemicalsPressure resistant up to 0.3 barHose tubing stop-cockFor dia. Nominal Length mm Price € Quantity Scale Item no.mm width mmscale from price €9-11 7 85 3.14 50 2.83 8614-0007 N412-15 9 97 5.05 50 4.62 8614-0009 N4www.buerkle.de | info@buerkle.de | Hotline +49 (0) 76 35 8 27 95-0

Non-return valves with conical inlet/outletNon-return valves PP21Valve made of PP and POM, seal made of EPDM,springs made of stainless steel 1.4401.Retaining valve with embossed directional arrow or printed in black. With conicalnozzles. Various usesMax. operating pressure 6 bar (at + 20°C)Max. operating temperature 80°CPressure difference 12 mbarResistant to compression max. 4 barOperating temperature +0 to +40 °CWith PP valve ball, on request also with ball made of stainless steel or PTFENon-return valves with conical inlet/outletFor dia. mm Print Price € Quantity scale from Scale price € Item no.1 6-8 embossed 2.45 100 2.23 8714-0060 N41 8-10 embossed 2.45 100 2.23 8714-0080 N41 10-14 embossed 3.06 100 2.42 8714-0100 N42 6-8 black 2.68 100 2.46 8714-1006 N42 8-10 black 2.68 50 2.46 8714-1008 N42 10-14 black 3.29 100 2.65 8714-1010 N4Non-return valves PPThread Price € Quantity Scale price € Item no.scale from1/2’’ 11.15 5 10.10 8540-0012 N3229

Rapid couplingsFast and safe connection for liquids, gases, compressed air and vacuum. Rapidcouplings are the ideal when connecting and separating hoses, machines, apparatus,containers, etc. Top quality, with tested reliability, small space requirement,maximum possible flow, easy operation (single handed operation) and an elegantdesign distinguish the rapid couplings. They fulfil the most stringent requirements.The couplings are available in two different materials: POM (Polyoxymethylene)and PP (Polypropylene). The rapid couplings are available with a hose nozzle, hosescrew joint, thread connector or as a built-in component for control panels, withor without stop-valve respectively.The secure O-ring guarantees that rapid couplings are leakproof. All the couplings(female connections) and nipples (male connections) that are within the sameflow range are interconnecting.Spring/lock Stainless steel V4ABody POM: Seal (standard): Buna-N Operating pressure at 20 °C: with vacuum up to 10 bar Operating temperature: -40 °C to +80 °CBody PP: Seal (standard): EPDM Operating pressure at 20 °C: up to 8 bar Operating temperature: 0 °C to +110 °CUse1. The couplings are simply connected to each other, automatically clicking intoplace and opening the valves.2. When disconnecting, (one handed operation), the valves are automaticallysealed, no leakage occurs.230www.buerkle.de | info@buerkle.de | Hotline +49 (0) 76 35 8 27 95-0

Hose couplings, 100 % plastic (POM), nw 6.4 mmHose couplings, 100 % plastic (POM), nw 6.4 mm, completeModelHose Connector Nominal Length mm Price € Quantity scale from Scale price € Item no.inner dia.mmtype widthmmcoupling, complete without valve 6,4 hose nozzle 6,4 54 5.10 25 4.66 8780-1040 N3coupling, complete without valve 9,5 hose nozzle 6,4 54 5.10 25 4.66 8780-1060 N3Hose couplings, 100 % plastic (POM), nw 6.4 mm, male connections, hose nipples with hose nozzlesModel Hose inner dia. mm Connector Nominal Length mm Price € Quantity scale from Scale price € Item no.type widthmmnipple, without valve 6,4 hose nozzle 6,4 36 1.88 25 1.76 8782-1040 N3nipple, without valve 9,5 hose nozzle 6,4 36 1.88 25 1.76 8782-1060 N3Hose couplings, 100 % plastic (POM), nw 6.4 mm, male connections, angled nipples with hose nozzleModel Hose inner dia. mm Connector Nominal Length mm Price € Quantity scale from Scale price € Item no.type widthmmangled-nipple,without valve9,5 hose nozzle 6,4 23 4.32 25 3.97 8783-1060 N3Hose couplings, 100 % plastic (POM), nw 6.4 mm, female connections, hose couplings with hose nozzlesModelHose inner dia. Connector Nominal Length mm Price € Quantity scale from Scale price € Item no.mmtype widthmmcoupling, without valve 6,4 hose nozzle 6,4 34 3.35 10 3.22 8781-1040 N3coupling, without valve 9,5 hose nozzle 6,4 34 3.35 25 3.11 8781-1060 N3Hose couplings, 100 % plastic (POM), nw 6.4 mm, female connections, hose couplings with conical external threadModel Thread ConnectortypeNominalwidthmmLength mm Price € Quantity scale from Scale price € Item no.coupling, without valve 3/8’’ NPT thread 6,4 35 5.40 25 5.05 8783-1062 N3231

Rapid couplings, nw 3.2 mm, female connectionsRapid couplings, nw 3.2 mm, female connections, hose couplings with conical external threadThread Material Model Length mm Price € Quantity scale Scale price € Item no.from1/8’’ NPT POM with valve 26 11.70 25 10.85 8740-1122 N31/4’’ NPT POM with valve 28 11.70 25 10.85 8740-1142 N31/4’’ BSP POM with valve 28 12.35 25 11.35 8740-1141 N31/8’’ NPT PP with valve 26 13.95 25 12.80 8740-2022 N3Rapid couplings, nw 3.2 mm, female connections, hose couplings with hose nozzlesHose inner dia. Material Model Length mm Price € Quantity scale Scale price € Item no.mmfrom3,2 POM with valve 42 11.85 25 11.05 8741-1202 N34,8 POM with valve 47 12.35 25 11.35 8741-1203 N36,4 POM with valve 47 11.85 25 11.05 8741-1204 N33,2 POM without valve 42 8.30 25 7.70 8741-1002 N34,8 POM without valve 47 8.50 25 8.00 8741-1003 N36,4 POM without valve 47 8.30 25 7.70 8741-1004 N33,2 PP with valve 42 13.10 25 13.05 8741-2002 N3Rapid couplings, nw 3.2 mm, female connections, hose couplings with hose screw-jointHose inner x outer Material Model Length mm Price € Quantity scale Scale price € Item no.dia. mmfrom4 x 6 POM with valve 44 12.55 25 11.60 8742-1104 N34 x 6 PP with valve 44 20.30 25 18.65 8742-2004 N3Rapid couplings, nw 3.2 mm, female connections, for plate mounting with hose nozzleHose inner dia. Material Model Plate borehole Length mm Price € Quantity scale Scale price € Item no.mmdia. mmfrom1,6 POM with valve 13 36 17.90 25 16.45 8743-1101 N33,2 POM with valve 13 42 16.45 25 15.25 8743-1102 N34,8 POM with valve 13 47 16.75 25 15.45 8743-1103 N36,4 POM with valve 13 47 16.75 25 15.45 8743-1104 N31,6 PP with valve 13 36 21.30 25 19.55 8743-2001 N36,4 PP with valve 13 47 20.30 25 18.65 8743-2004 N3Rapid couplings, nw 3.2 mm, female connections, for plate mounting with hole screw-jointPlate borehole Material Model Hose inner x Length mm Price € Quantity scale Scale price € Item no.dia. mmouter dia. mmfrom13 POM with valve 4 x 6 44 16.95 25 15.65 8744-1104 N313 POM without valve 4 x 6 44 15.35 25 13.95 8744-1004 N313 PP with valve 4 x 6 44 21.55 25 19.80 8744-2004 N3232www.buerkle.de | info@buerkle.de | Hotline +49 (0) 76 35 8 27 95-0

Rapid couplings, nw 3.2 mm, male connectionsRapid couplings, nw 3.2 mm, male connections, hose nipples with external threadThread Material Model Length mm Price € Quantity scale Scale price € Item no.from1/8’’ NPT POM without valve 15 3.97 25 3.74 8750-1022 N31/8’’ BSP POM with valve 22 12.20 25 11.25 8750-1121 N3Rapid couplings, nw 3.2 mm, male connections, hose nipples with hose nozzlesHose inner dia. Material Model Length mm Price € Quantity scale Scale price € Item no.mmfrom1,6 POM without valve 20 3.45 25 3.22 8751-1001 N33,2 POM without valve 27 2.14 25 2.00 8751-1002 N34,8 POM without valve 32 2.51 25 2.39 8751-1003 N36,4 POM without valve 32 2.64 25 2.51 8751-1004 N31,6 POM with valve 34 12.90 25 11.85 8751-1101 N33,2 POM with valve 42 11.60 25 10.70 8751-1102 N34,8 POM with valve 44 11.70 25 10.95 8751-1103 N36,4 POM with valve 40 11.60 25 10.70 8751-1104 N31,6 PP with valve 34 17.15 25 15.85 8751-2101 N33,2 PP with valve 43 13.10 25 12.20 8751-2102 N36,4 PP with valve 40 15.25 25 13.80 8751-2104 N3Rapid couplings, nw 3.2 mm, male connections, hose nipple with hose screw-jointHose inner x outer Material Model Length mm Price € Quantity scale Scale price € Item no.dia. mmfrom4 x 6 POM without valve 37 5.80 25 5.25 8752-1004 N34 x 6 POM with valve 37 11.25 25 10.40 8752-1104 N32 x 4 POM with valve 27 12.80 25 11.70 8752-1142 N34 x 6 PP with valve 37 15.45 25 14.20 8752-2104 N3Rapid couplings, nw 3.2 mm, male connections, for plate mounting with hose nozzleHose inner dia. Material Model Plate borehole Length mm Price € Quantity scale Scale price € Item no.mmdia. mmfrom3,2 POM with valve 13 41 16.10 25 14.90 8753-1102 N34,8 POM with valve 13 46 16.95 25 15.65 8753-1103 N36,4 POM with valve 13 46 16.65 25 15.35 8753-1104 N3Rapid couplings, nw 3.2 mm, male connections, for plate mounting with hose screw-jointHose inner x Material Model Plate borehole Length mm Price € Quantity scale Scale price € Item no.outer dia. mmdia. mmfrom4 x 6 POM with valve 13 43 20.05 25 18.45 8754-1104 N3Rapid couplings, nw 3.2 mm, male connections, angled nipples with hose nozzleHose inner dia. Material Model Length mm Price € Quantity scale Scale price € Item no.mmfrom3,2 POM with valve 28 16.10 25 14.90 8755-1102 N36,4 POM with valve 28 16.10 25 14.90 8755-1104 N36,4 PP with valve 28 19.80 25 18.25 8755-2004 N3233

Rapid couplings, nw 6.4 mm, female connectionsRapid couplings, nw 6.4 mm, female connections, hose couplings with conical external threadThread Material Model Length mm Price € Quantity scale from Scale price € Item no.1/4’’ BSP POM without valve 29 11.35 25 10.50 8760-1041 N31/4’’ NPT POM without valve 29 11.35 25 10.50 8760-1042 N33/8’’ BSP POM without valve 29 11.60 25 10.85 8760-1061 N31/4’’ BSP POM with valve 29 12.80 25 11.70 8760-1141 N31/4’’ NPT POM with valve 29 12.80 25 11.70 8760-1142 N31/4’’ NPT PP with valve 29 15.65 25 14.50 8760-2141 N33/8’’ NPT PP with valve 29 21.15 25 19.45 8760-2161 N3Rapid couplings, nw 6.4 mm, female connections, hose couplings with hose nozzlesHose inner dia. mm Material Model Length mm Price € Quantity scale from Scale price € Item no.6,5 POM without valve 50 10.85 25 9.90 8761-1040 N38 POM without valve 50 10.85 25 9.90 8761-1050 N39,5 POM without valve 50 10.85 25 9.90 8761-1060 N36,5 POM with valve 50 13.00 25 12.00 8761-1140 N38 POM with valve 50 13.00 25 12.00 8761-1150 N39,5 POM with valve 50 13.00 10 12.45 8761-1160 N36,5 PP with valve 50 17.05 25 15.75 8761-2140 N39,5 PP with valve 50 20.80 10 19.30 8761-2160 N3Rapid couplings, nw 6.4 mm, female connections, for plate mounting with hose nozzleHose inner dia. Material Model Plate borehole Length mm Price € Quantity scale Scale price € Item no.mmdia. mmfrom6,5 POM without valve 19 50 21.85 25 20.15 8763-1040 N38 POM without valve 19 50 23.05 25 20.95 8763-1050 N36,5 POM with valve 19 50 24.50 25 22.45 8763-1140 N38 POM with valve 19 50 25.75 25 23.55 8763-1150 N39,5 POM with valve 19 50 24.50 25 22.45 8763-1160 N39,5 PP with valve 19 50 27.85 25 25.65 8763-2160 N3Rapid couplings, nw 6.4 mm, female connections, hose couplings with hose screw-jointHose inner x outer Material Model Length mm Price € Quantity scale from Scale price € Item no.dia. mm4 x 6 POM with valve 47 18.65 25 16.95 8762-1140 N38 x 10 POM with valve 50 21.15 25 19.45 8762-1310 N36 x 8 POM with valve 50 20.05 25 18.45 8762-1380 N3234www.buerkle.de | info@buerkle.de | Hotline +49 (0) 76 35 8 27 95-0

Rapid couplings, nw 6.4 mm, male connectionsRapid couplings, nw 6.4 mm, male connections, hose nipples with external threadThread Material Model Length mm Price € Quantity scale from Scale price € Item no.1/4’’ NPT POM with valve 38 12.90 25 12.00 8770-1142 N31/4’’ BSP POM without valve 32 4.26 25 4.03 8770-1041 N31/4’’ NPT POM without valve 32 4.26 25 3.85 8770-1042 N31/4’’ NPT PP with valve 38 17.70 25 16.20 8770-2142 N3Rapid couplings, nw 6.4 mm, male connections, hose nipples with hose nozzlesHose inner dia. mm Material Model Length mm Price € Quantity scale from Scale price € Item no.6,5 POM without valve 32 2.76 25 2.51 8771-1040 N38 POM without valve 32 2.76 25 2.51 8771-1050 N39,5 POM without valve 32 2.76 25 2.39 8771-1060 N36,5 POM with valve 47 12.80 25 11.85 8771-1140 N38 POM with valve 47 12.80 25 11.85 8771-1150 N39,5 POM with valve 42 12.80 10 12.35 8771-1160 N36,5 PP with valve 47 15.25 25 13.80 8771-2140 N39,5 PP with valve 42 16.65 10 15.85 8771-2160 N3Rapid couplings, nw 6.4 mm, male connections, for plate mounting with hose nozzleHose inner dia. mm Material Model Plate borehole dia. mm Length mm Price € Quantity scale from Scale price € Item no.6,5 POM without valve 19 35 7.70 25 7.00 8773-1040 N39,5 POM without valve 19 47 9.90 25 8.85 8773-1060 N36,5 POM with valve 19 49 16.85 25 15.55 8773-1140 N38 POM with valve 19 49 17.90 25 16.65 8773-1150 N39,5 POM with valve 19 49 21.85 25 20.15 8773-1160 N3Rapid couplings, nw 6.4 mm, male connections, hose nipple with hose screw-jointHose inner x outer dia. mm Material Model Length mm Price € Quantity scale Scale price € Item no.from4 x 6 POM with valve 45 15.05 25 13.70 8772-1140 N36 x 8 POM with valve 43 16.95 25 15.65 8772-1380 N38 x 10 POM with valve 43 22.30 25 20.50 8772-1310 N34 x 6 POM without valve 35 13.10 25 12.20 8772-1280 N3Rapid couplings, nw 6.4 mm, male connections, for plate mounting with hose screw-jointHose inner x Material Model Plate borehole Length mm Price € Quantity scale Scale price € Item no.outer dia. mmdia. mmfrom4 x 6 POM with valve 19 45 16.10 25 14.90 8774-1140 N36 x 8 POM with valve 19 49 21.55 25 19.80 8774-1380 N3Rapid couplings, nw 6.4 mm, male connections, angled nipples with hose nozzleHose inner dia. mm Material Model Length mm Price € Quantity scale from Scale price € Item no.6,5 POM without valve 31 10.10 25 9.30 8775-1040 N39,5 POM without valve 31 10.10 25 9.30 8775-1060 N39,5 POM with valve 31 16.10 25 14.90 8775-1160 N36,5 PP with valve 31 18.90 25 17.15 8775-2140 N39,5 PP with valve 31 19.80 25 18.25 8775-2160 N3235

Threaded fittingsPPHose nozzle with strong outerthread.Tube nozzles, fixed, external threadThread Nozzle dia. mm Nominal width mm Price € Quantity scale from Scale price € Item no.3/8’’ 12 7,5 0.84 20 0.77 8545-3812 N31/2’’ 13 8 1.08 20 0.97 8545-0012 N31/2’’ 16 10 1.31 20 1.20 8545-1216 N31/2’’ 20 13 1.38 20 1.27 8545-1220 N33/4’’ 12 7,5 1.21 20 1.09 8545-3412 N33/4’’ 16 10,5 1.23 20 1.12 8545-0034 N33/4’’ 20 13 1.39 20 1.28 8545-3420 N31’’ 25 19 1.51 10 1.38 8545-0100 N3 Hosenozzle, PP Seal, EPDMHose nozzle with cap nut, innerthread.Tube nozzles, with cap nutThread Nozzle dia. mm Nominal width mm Price € Quantity scale from Scale price € Item no.1/2’’ 13 9 2.00 20 1.81 8546-0012 N31/2’’ 16 10 2.27 20 2.06 8546-1216 N33/4’’ 10 6 2.52 20 2.46 8546-3410 N33/4’’ 12 7,5 2.28 20 2.09 8546-3412 N33/4’’ 13 8,5 2.65 20 2.52 8546-3413 N33/4’’ 16 10 2.14 20 1.95 8546-0034 N33/4’’ 20 13 2.48 20 2.24 8546-3420 N31’’ 25 20 2.49 10 2.25 8546-0100 N3Hose angle bracket, 90°, withstrong outer thread.236PP Hose anglebracket, PP Seal, EPDMHose angle bracket, 90°, withcap nut, inner thread and reducingnozzle.Tube bend, fixed, external threadThread Nozzle dia. mm Nominal width mm Price € Quantity scale from Scale price € Item no.1/2’’ 12 7,5 1.83 20 1.68 8547-0012 N31/2’’ 16 11 2.28 20 2.09 8547-1216 N31/2’’ 20 15 2.49 20 2.24 8547-1220 N33/4’’ 12 7,5 1.88 20 1.72 8547-0034 N33/4’’ 20 15 2.63 20 2.40 8547-3420 N33/4’’ 22 17 2.54 20 2.31 8547-3422 N31’’ 25 19,5 2.67 10 2.43 8547-0100 N3Tube bend, with cap nutThread Nozzle dia. mm Nominal width mm Price € Quantity scale from Scale price € Item no.1/2’’ 12 7,5 2.93 20 2.65 8548-0012 N33/4’’ 12 7 3.61 20 3.22 8548-3412 N33/4’’ 16 11 3.40 20 3.06 8548-0034 N33/4’’ 20 15,5 3.91 20 3.50 8548-3420 N31’’ 25 19,5 4.09 10 3.74 8548-0100 N3www.buerkle.de | info@buerkle.de | Hotline +49 (0) 76 35 8 27 95-0

Threaded fittingsPPTube bend, with cap nut, whiteThread Outlet dia. mm Nominal width mm Price € Quantity scale from Scale price € Item no.M29x1,75 9 15 3.22 20 2.91 8548-0020 N3M36x3 10 20 3.55 20 3.19 8548-0025 N3M42x3 11 25 4.24 10 3.82 8548-0030 N3Hose angle bracket, 90°, withcap nut, inner thread and reducingnozzle.PPContainer connection, whiteThread Nominal width mm Price € Quantity scale from Scale price € Item no.1/2’’ 13,5 7.60 20 6.80 8533-0012 N33/4’’ 18 8.80 10 8.00 8533-0034 N31’’ 24 9.30 20 8.40 8533-0100 N3Container connector with outerthread, complete with EPDMseals, for easy mounting ofthread in the sides of containers.Hexagonal nut with innerthread.PEPEFlat seals made of Polyethylene,transparent fitting outer or innerthread.Hexagonal nutsThread For dia. mm Price € Quantity scale from Scale price € Item no.1/2’’ 27 1.88 10 1.72 8537-0012 N33/4’’ 36 2.14 10 1.95 8537-0034 N31’’ 46 2.34 10 2.15 8537-0100 N32” 3.50 10 3.16 8537-0200 N3Flat seals, PEThread Model Pieces per pack Price € Quantity scale from Scale price € Item no.1/2’’ fi ts outer thread 10 2.24 10 2.03 8538-0012 N33/4’’ fi ts outer thread 10 2.32 10 2.26 8538-0034 N31’’ fi ts outer thread 10 4.62 10 4.20 8538-0100 N32” fi ts outer thread 10 11.25 10 10.10 8538-0200 N31/2’’ fi ts inner thread 10 2.24 10 2.03 8539-0012 N33/4’’ fi ts inner thread 10 2.32 10 2.26 8539-0034 N31’’ fi ts inner thread 10 4.62 10 4.26 8539-0100 N3237

Threaded fittingsSocket with inner thread.Nipple with outer thread.Angle bracket 90° with inner threadPPPPPPSocket, inner threadThread NominalwidthmmPrice€QuantityscalefromScaleprice €Item no.1/2’’ 19 2.34 10 2.14 8501-0012 N33/4’’ 23 2.86 10 2.60 8501-0034 N31’’ 28,5 3.74 10 3.40 8501-0100 N3Nipple, outer threadThreadNominalwidthmmPrice€Quantityscale price €ScalefromItem no.1/2’’ 13,5 1.98 10 1.79 8505-0012 N33/4’’ 18 2.49 10 2.25 8505-0034 N31’’ 23,5 3.40 10 3.06 8505-0100 N390° bend, inner threadThreadNominalwidthmmPrice€1/2”- 13,5 3.74 10 3.40 8506-1234 N33/4’’3/4’’-1’’ 18 4.77 10 4.37 8506-3410 N3QuantityscalefromScaleprice €Item no.1/2’’ 17,5 2.49 10 2.25 8515-0012 N33/4’’ 23 3.50 10 3.22 8515-0034 N31’’ 28,5 4.09 10 3.74 8515-0100 N3Socket, reduced with inner thread.Nipple, reduced, with outer thread.Angle bracket 90° with inner / outer thread.PPPPPPSocket, reducedThreadNominalwidthmmPrice€QuantityscalefromScaleprice€Item no.1/2’’ - 17,5 4.09 10 3.80 8502-1234 N33/4’’3/4’’ - 1’’ 23 5.10 10 4.62 8502-3410 N3Nipple, reducedThreadNominalwidthmmPrice€QuantityScalescale pricefrom €Item no.90° bend, inner/outer threadThreadNominal Pricewidth mm €QuantityscalefromScaleprice€Item no.1/2’’ 14 2.86 10 2.60 8516-0012 N33/4’’ 19 4.09 10 3.74 8516-0034 N31’’ 24,5 4.77 10 4.32 8516-0100 N3238www.buerkle.de | info@buerkle.de | Hotline +49 (0) 76 35 8 27 95-0

Threaded fittingsT piece with inner thread.PPT-pieceThreadNominalwidthmmPrice€QuantityscalefromScaleprice€Item no.1/2’’ 17,5 3.22 10 2.86 8525-0012 N33/4’’ 23 4.09 10 3.74 8525-0034 N31’’ 28,5 5.40 10 4.88 8525-0100 N3Tube extension with outer thread. 8520-0012, -0034 length 152 mm, 8520-0100length 162 mm. PPTube extensionsThreadNominalwidthmmPrice€QuantityscalefromScaleprice€Item no.1/2’’ 12,5 2.98 10 2.69 8520-0012 N33/4’’ 18 3.91 10 3.61 8520-0034 N31’’ 23,5 5.15 20 4.77 8520-0100 N3Container connector with outer thread, completewith EPDM seals, for easy mounting ofthread in the sides of containers. PPContainer connectionThreadNominalwidthmmPrice€QuantityscalefromScaleprice€Item no.1/2’’ 13,5 6.80 10 6.20 8530-0012 N33/4’’ 18 7.80 10 7.25 8530-0034 N31’’ 24 8.95 10 8.20 8530-0100 N3Screw joint with inner thread, enables easydisconnection of tube connections. PPScrew jointThreadNominalwidthmmPrice€QuantityScalescale pricefrom €Item no.1/2’’ 17,5 10.00 10 9.20 8510-0012 N33/4’’ 21,5 11.15 10 10.10 8510-0034 N31’’ 26,5 11.60 10 10.65 8510-0100 N3Closing cap with inner thread.CapPPThread Price € QuantityscalefromScaleprice €Item no.1/2’’ 2.70 10 2.46 8535-0012 N33/4’’ 3.40 10 3.06 8535-0034 N31’’ 3.74 10 3.40 8535-0100 N3Threaded cap outer thread.PPStopperThread Price € QuantityscalefromScaleprice €Item no.1/2’’ 1.98 10 1.79 8536-0012 N33/4’’ 2.49 10 2.25 8536-0034 N31’’ 3.11 10 2.75 8536-0100 N3239

VacuMan vacuum pumpVacuMan vacuum or pressure pumpHand pump can be operated with one hand to create a vacuum or pressure, independent of a power supply (e.g. vacuum filtration, takingsamples, dissipation of desiccators). Maintenance-free, self-lubricating, mainly corrosion resistant. Connection for hoses with 6.4 mm innerØ. Available in PVC or aluminium for heavy duty.With or without gaugeSampling set with suction hose and sample container andadapter set for hoses from 5 to 14 mm available as accessoryWith gaugeAdapter set for hoses from 5 to 14 mm available as accessoryVacuMan vacuum pumpPressure Stroke approx. Material Vacuum mbar Price € Item no.gauge mlno 32 PVC - 850 86.45 5620-0360 N3yes 16 PVC - 850 87.65 5620-1180 N3yes 32 PVC - 850 103.65 5620-1360 N3AccessoriesDescription Price € Item no.Adapter set for hoses from 5 to 14 mm 9.65 5620-0010 N3Sampling set with suction hose and sample container 22.80 5620-0020 N3240VacuMan vacuum or pressure pumpPressure Material Stroke approx.Vacuum Pressure Price € Item no.gaugeml mbar max. baryes PVC 16 - 850 + 2 143.95 5620-2180 N3yes aluminium 16 - 850 + 2 244.10 5620-2181 N3AccessoriesDescription Price € Item no.Adapter set for hoses from 5 to 14 mm 9.65 5620-0010 N3Sampling set with suction hose and sample container 22.80 5620-0020 N3www.buerkle.de | info@buerkle.de | Hotline +49 (0) 76 35 8 27 95-0

Water-jet pumpAirJet Mini vacuum pump/compressorPP, PTFE, FKMContinuous use temperaturemax. 80°CIncl. reducing pieceto 1/2”1The water jet pump is used for withdrawing liquids and gases, andfor creating a vacuum. Simple operation and easy cleaning. Very lowwater consumption, constant pressure and high suction.Suction tube connection: Olive 6 – 9 mm outer Ø, screw cap GL 14.Water consumption at 3.5 bar flow pressure and 12°C water temperature:approx. 190 l/hour at 3.5 bar (absolute). 6 l of water areneeded to evacuate a 1 l pressure vessel from normal pressure to finalpressure.Suction capacity at 3.5 bar flow pressure and 12°C water temperature:400 l/h evacuation time for a 1 l pressure vessel from normalpressure to 100 mbar: 60 sec. (± 10 sec.).Final pressure at 3.5 bar flow pressure and 12°C water temperature:< 16 mbar.The vacuum connection can be unscrewed and supplied adaptersprovide a variety of connection options to the water supply.Water-jet pumpPrice € Quantity scale from Scale price € Item no.42.05 10 40.85 9668-0200 N3AccessoriesDescription Price € Item no.Reducing adapter 3/8” 5.55 9668-0010 N3Reducing adapter M 22 x 1 (perlator thread) 5.45 9668-0011 N3The AirJet Mini single-head membrane vacuum pump is suitable fora variety of applications in the laboratory and industry. The dry runningmembrane vacuum pump is able to pump, compact and evacuate100% oil-free, which means it does not distort results or addimpurities, and can also be used as a compressor. The AirJet Mini isused to pump and evacuate air and neutral or slightly aggressive orcorrosive gases and vapours. Weight 1.9 kg, dimensions LxWxH 164/90/141 mm Hose connection ID 4 mm Maintenance-free, environmentally friendly High level of gas tightness Very quiet with low vibrationsAttention! Make sure to pay attentionto the “List of Chemical Resistance“!2 31 AirJet Mini vacuum pump/compressorModelPump capacity Vacuum Pressure Price € Item no.approx. l/min mbar max. barMembrane made of EPDM 6 100 2,4 312.00 5625-2000 N2Membrane made of PTFE 5,5 160 2,5 376.90 5625-2001 N2AccessoriesDescription Price € Item no.2 AirJet Mini fi ne regulation head 68.00 5625-2002 N23 AirJet Mini sound absorber 11.50 5625-2003 N2241

DesiccatorMercury collectorDesiccators made of plastic, break resistant, lightweight and suitablefor vacuums. Stopcock suitable for vacuums up to 980 mbar.Base and desiccator plate made out of Polypropylene. Lid is crystalclear Polycarbonate with a non-return valve and a venting valve. O-ring seal made of Polychlorobutadiene-rubber. Continuous temperaturemax. + 60 °C.DesiccatorInner dia. Outer dia. Height mm Price € Quantity Scale Item no.mm mmscale from price €150 175 190 63.50 5 49.25 9791-0150 N3200 235 230 104.85 5 94.40 9791-0200 N3250 285 300 125.55 5 115.20 9791-0250 N3AccessoriesDescription Price € Item no.Perforated plates for desiccator for i.d. 150 mm 7.00 9791-0151 N3Perforated plates for desiccator for i.d. 200 mm 9.70 9791-0201 N3Perforated plates for desiccator for i.d. 250 mm 10.70 9791-0251 N3O-ring for desiccator for i.d. 150 mm 3.22 9791-0152 N3O-ring for desiccator for i.d. 200 mm 4.37 9791-0202 N3O-ring for desiccator for i.d. 250 mm 6.40 9791-0252 N3242Hose connection fits hoses with inner Ø 8.5 mmDelivery incl. O-ringPerforated plate and additional O-rings available as accessoriesBürkle’s mercury collector enables the easy collection of spilt mercury,which can then be used again. The mercury collector is composedof a tub with a screw cap lid that has a special plastic foaminserted. On pressing this foam gently on the spilt mercury, thefoam’s pores are opened and the mercury globules are absorbed.The cap is then screwed on the tub, the globules are released againand fall through the perforated separation into the tub.Mercury collectorPrice € Quantity scale from Scale price € Item no.23.45 10 21.15 9789-0001 N4AccessoriesDescription Price € Item no.Spare plastic foam insert for mercury collector 3.85 9789-0002 N4www.buerkle.de | info@buerkle.de | Hotline +49 (0) 76 35 8 27 95-0

Eyes Fresh mini eyewash stationEye rinsing bottleEmpty bottle for 600 ml contents, leakproof due tovalve and dust protection cap. Instructions printed on(in German language), made of transparent PE.Ideal for the lab, filling stations or all work places where aggressive substancesare used. “Eyes Fresh” can be attached to any standard cold water tap. For normaluse of the tap, just press the button and the function changes back from theeye wash (returns automatically to eyewash-function when the tap is closed). Canbe fitted onto taps with M22x1, 1/2“ or 3/8“ outer thread.EyesFresh mini eyewash stationModel Price € Quantity scale from Scale price € Item no.Press button for normaluse127.80 5 117.55 2515-0100 N4Eye rinsing bottlePrice € Quantity scale from Scale price € Item no.28.10 10 25.45 2507-2000 N3Wall fixturePrice € Quantity scale from Scale price € Item no.14.60 10 13.95 2507-2001 N3243

HotGripRubiflex protective glovesHand protection made of silicone rubber highly resistant to cold andheat. Protects fingers and hands from burns and freezing whenworking with apparatus which has extreme temperatures. HotGrip isresistant to temperatures from - 60 °C to + 200 °C (briefly up to +250 °C). Deep frozen, hot or even boiling substances and apparatuscan be safely handled and positioned. Silicone rubber is extremelyelastic and slip-proof, so that even smooth surfaced apparatus suchas hot glass flasks can be securely gripped.Attention! Make sure topay attention to the “Listof Chemical Resistance“!With short or long gauntlet.Safe working with fats, mineraloils, solvents and many acidsand alkalis. Made from nitrile rubber Very flexible, soft to thetouch High abrasion and cut resistance Comfortable cotton interlockinterior To standard EN 374HotGripModel Colour Price € Quantity scale from Scale price € Item no.for the whole hand red 20.80 10 19.55 9768-0001 N3for thumb and one fi nger white 24.35 10 23.15 9768-0002 N3for thumb and 1 to 2fi ngerswhite 32.15 10 30.45 9768-0003 N3244Rubiflex protective glovesModel Length cm Price € Quantity scale Scale price € Item no.fromstandard 37 22.30 10 20.40 2507-0002 N3long wrist 60 42.70 10 38.80 2507-0003 N3www.buerkle.de | info@buerkle.de | Hotline +49 (0) 76 35 8 27 95-0

SnowPack ® dry ice machine | - 79 °C cryogenic cooling on-tapSnowPack ® enables you to obtain a - 79 °Cdry ice tablet weighing 50 or 250 g within afew moments, without complicated technologyand without electricity! You can thereforeobtain low-cost cooling to very lowtemperatures at any time you like.SnowPack ® is often used in hospitals, universities,schools, institutes, laboratories, inthe chemical industry and in materials testingfacilities.Examples of use: Lowering the temperaturein cooling baths or cold traps, pre-coolingtissue samples, ensuring safe transport orembedding biological substances, freezingblood and tissue samples, studies in chemistry,physics and materials technology, etc.Dry ice is easy to handle, odourless and flavourless.The SnowPack ® dry ice machinecan be installed on any commercial CO 2-bottlewith a standpipe valve (thread W 21.80 x1/14” according to DIN 477 No. 6). These oftenexist in many production facilities andlaboratories anyway. If this is not the case, abottle can be rented for a small price from alocal specialist gas distributor.The use of SnowPack is easy:1. Simply screw SnowPack onto a CO 2bottle with riser valve2. Open the valve, CO 2gas flows into theSnowPack and crystallises to dry ice3. Open the clamp4. Take out the dry ice pelletSnowPack ® dry ice machine Ideal cooling media for sample transport Performance depends on room temperatureand pressureModel Tablet dia. x Weight g Gas escape time Tablets per 22 kg Price € Item no.H mmca. min bottleSnowPack 50 50 x 30 50 0,5 approx. 90 185.45 9805-0030 N4SnowPack 250 80 x 60 250 1 approx. 16 227.95 9805-0200 N4245

Standard bungs siliconeStandard bungsBungs PEThe bungs are transparent, chemically-biologicallyneutral, food-safe according to BfRRecommendation XV and FDA § 177.2600. Temperature resistant from -60 °C to+200 °C, briefly to +230 °C Sterilisable Non-toxicStandard bungs silicone rubberDia.topmmHeightmmPrice€Dia.bottommmQuantityscalefromScaleprice€Item no.5 9 20 0.25 100 0.22 9764-0610 N38 12 20 0.31 100 0.29 9764-0913 N310,5 14,5 20 0.36 100 0.33 9764-1115 N314 18 20 0.54 100 0.51 9764-1418 N317 22 25 0.87 100 0.84 9764-1621 N318 24 30 1.15 100 1.12 9764-1924 N321 27 30 1.48 100 1.37 9764-2227 N326 32 30 2.40 100 2.20 9764-2531 N329 35 30 3.11 100 2.76 9764-2834 N3Laboratory standard bung made of PVC withgood chemical resistance against acids andalkalis. PVC, soft, redAttention! Make sure to pay attentionto the “List of Chemical Resistance“!Standard bungsDia.topmmHeightmmPrice€Dia.bottommmQuantityscalefromScaleprice€Item no.7 10 18 0.41 100 0.36 9763-0610 N39 13 20 0.48 100 0.42 9763-0913 N311 15 20 0.53 100 0.48 9763-1115 N314 18 20 1.86 100 1.73 9763-1418 N316 21 24 2.22 100 2.09 9763-1621 N319 24 25 2.28 100 2.15 9763-1924 N322 27 24 2.57 100 2.43 9763-2227 N325 31 29 2.70 100 2.57 9763-2531 N328 34 30 2.78 100 2.64 9763-2834 N331 38 33 2.93 100 2.78 9763-3138 N334 41 35 2.67 100 2.42 9763-3441 N342 49 34 3.61 100 3.16 9763-4249 N346 53 39 4.37 100 4.03 9763-4654 N3Stopper made of PE, hollow with sealingrings and octagonal top.PEBungs PEGGJDia.topmmPrice€Dia.bottommmQuantityscalefromScaleprice€Item no.7/16 5,9 7,5 0.28 100 0.27 9760-0716 N310/19 8,2 10 0.40 100 0.38 9760-1019 N312/21 10,4 12,5 0.48 100 0.45 9760-1221 N314/23 12,1 14,5 0.51 100 0.48 9760-1423 N319/26 16,4 19 0.59 100 0.53 9760-1926 N324/29 21,1 24 0.69 100 0.62 9760-2429 N329/32 25,8 29 0.89 100 0.81 9760-2932 N334/35 31 34,5 1.67 100 1.48 9760-3435 N345/40 41 45 2.02 100 1.84 9760-4045 N3246www.buerkle.de | info@buerkle.de | Hotline +49 (0) 76 35 8 27 95-0

fish-clip ®Compression-type bung made ofsiliconeWith fish-clip ® cell cultures, abrasive media and other liquids thatare sensitive to mechanical stress are gently stirred. No disruptionof biocatalysts such as enzymes or cells. No scratching the vesselbase, no broken vessels resulting from stirrer bars ”jumping about”.Magnetic stirring bar. Also suitable for narrow vessel openings. fishclip® can be used for gentle stirring in any type of vessel such asbeakers, bottles, Erlenmeyer and round-bottom flasks.Compression-type fittingPVDF, autoclavable, excellent chemical resistanceRotor 15 mm ØGas tightSupport rod length 250 mmIncl. stirring barMagnetic stirrer is not supplied.Compression-type fitting with NScorefish-clip ®Colour Fits to stirring Price € Quantity scale Scale price € Item no.bar dia. mmfromblue 6 34.40 10 32.50 8280-0006 N4red 8 34.40 10 32.50 8280-0008 N4AccessoriesDescription Price € Item no.Compression-type in silicone for fi sh-clip ® , for NS 29/32 4.32 8280-0253 N4Compression-type in silicone for fi sh-clip ® , for NS 19/26 3.11 8280-0257 N4Compression-type fi tting for fi sh-clip ® , GL 25, red 6.55 8280-0254 N4Compression-type fi tting for fi sh-clip ® , GL 32, grey 9.90 8280-0255 N4Compression-type fi tting for fi sh-clip ® , GL 25 with NS-cone 19/26 25.25 8280-0256 N4Compression-type fi tting for fi sh-clip ® , GL 32 with NS-cone 29/32 25.25 8280-0321 N4Magnetic stirring bars, length 15 mm, dia. 6 mm 1.81 8271-1506 N3Magnetic stirring bars, length 20 mm, dia. 6 mm 1.81 8271-2006 N3Magnetic stirring bars, length 25 mm, dia. 6 mm 2.08 8271-2506 N3Magnetic stirring bars, length 30 mm, dia. 6 mm 2.14 8271-3006 N3Magnetic stirring bars, length 40 mm, dia. 8 mm 2.51 8271-4008 N3Magnetic stirring bars, length 50 mm, dia. 8 mm 3.22 8271-5008 N3247

Magnetic stirring barsBaffle clipsCylindrical stirring bars with smooth surface, many uses. PTFE opaque Max. use temperature +270°C High performance permanent magnets and long lifespanCylindrical stirring bars with smooth surface, many uses.Magnetic stirring bar set consists of 10 of the most standard bars,complete with crystal clear box. 1 of each 15 x 6 mm, 30 x 7mm 2 of each 20 x 7 mm, 25 x 7 mm, 40 x 7 mm, 50 x 7 mmMagnetic stirring barsPrice € QuantityLength mm Dia. mm For fishclipScale Item no.® scale from price €15 6 yes 1.81 10 1.55 8271-1506 N320 6 yes 1.81 10 1.45 8271-2006 N320 7 no 2.42 10 2.21 8271-2007 N325 6 yes 2.08 10 1.67 8271-2506 N325 7 no 2.57 10 2.34 8271-2507 N330 6 yes 2.14 10 1.71 8271-3006 N330 7 no 2.92 10 2.64 8271-3007 N340 7 no 3.74 10 3.40 8271-4007 N340 8 yes 2.51 10 2.00 8271-4008 N350 7 no 4.37 10 4.03 8271-5007 N350 8 yes 3.22 10 2.51 8271-5008 N380 10 no 7.60 10 6.90 8271-8010 N3Magnetic stirring bar setModel Price € Quantity scale Scale price € Item no.fromset incl. ten bars 34.30 5 31.75 8271-1000 N3248When agitating with magnet or overhead agitators, usually a laminarcurrent with little turbulence tendency develops. Baffle clip disturbsthe flow direction and therefore provides a substantially bettermixing of the liquid. Baffle clip made of PP is provided with twoexchangeable blades in different sizes, which fit in beakers from 1 lto 5 l.PP, whiteBlade 15 x 160 mm for 1 to 2 litre beakersBlade 30 x 230 mm for 2 to 5 litre beakersSet includes one clip and two blades in both sizesBaffle clipsModel Price € Quantity scale Scale price € Item no.fromclip with twoblades4.88 10 4.49 8281-0001 N4www.buerkle.de | info@buerkle.de | Hotline +49 (0) 76 35 8 27 95-0

MortarStirring paddleClean-itMortar with particularly hard, abrasion resistantsurface. Mortar with base and spout.Pestle with particularly hard, abrasion resistantsurface.Melamine, whiteSteam sterilisable up to +121°CMortarDia.mmHeightmmPrice€CapacitymlQuantityscalefromScaleprice€Item no.125 80 400 11.85 5 10.85 8252-0300 N3150 95 700 14.70 5 13.10 8252-0500 N3PestleLengthmmWeightgPrice €QuantityscalefromScaleprice €Item no.130 60 12.55 5 11.60 8253-0125 N3150 90 13.45 5 12.35 8253-0145 N3Stirring paddle made of Polypropylene forgentle stirring in plastic and glass containers.PPShatterproofWarp resistantStirring paddleLength Width Total Price € Item no.mm mm length cm155 130 117 33.70 8203-2100 N3190 167 171 40.40 8203-3150 N3Dirt accumulations in lab glassware? Put anend to inconvenient scrubbing of lab glasswarewith outdated and unhygienic bottlebrushes. Stainless steel balls have excellentchemical resistance to standard commercialcleaning products. The balls can be usedhundreds of times. Tip: Clean-it is ideal foruse in every household, especially for winecarafes with red wine ridges or in narrowneckvases and bottles.Now with the new collecting pouch. Clean-itballs can be collected with a sieve in thepouch, rinsed and dried.Rust-free stainless steel, hygienicBalls 3 mm ØWith practical collecting pouchClean-itWeight g No. of balls Price € Item no.50 920 6.35 8282-0001 N4100 1840 11.95 8282-0002 N4249

Chemical resistance of plasticsChemicalsFormulaCAS-No.ConcentrationHazard noteInflammablePlasticsHDPELDPEPAPCPETGPMPPOMPPPSPSUPVC HARDPVC SOFTSANECTFE/ETFEFEPPTFEPVDFEPDMFPM/FKMNBRSIALV2AV4AAcetone C 3H 6O 000067-64-1 F, Xi X 1/1 3/3 1/0 4/4 4/4 2/3 1/3 1/3 4/4 4/4 4/4 0/0 4/4 2/3 (1) 1/1 3/4 1/0 4/4 4/4 0/0 1/1 1/1 1/1Calcium chloride CaCl 2010043-52-4 aqueous Xi 1/1 1/1 1/0 1/0 1/0 1/1 (3) 1/1 1/1 1/0 1/3 1/0 1/1 1/1 1/1 1/1 1/1 1/0 1/1 1/1 0/0 3/3 1/2L 1/2LChlorine Cl 2007782-50-5 10 % wet T 3/4 3/4 4/4 2/3 4/4 2/4 4/4 4/4 4/4 4/4 1/2 0/0 4/4 1/1 1/1 1/1 (2) 2/0 3/0 4/4 0/0 4/4 4/4 4/4Chloroform CHCl 3000067-66-3 100 % Xn 3/4 4/4 3/4 4/4 4/4 4/4 4/4 3/4 4/4 4/4 4/4 4/4 4/4 2/3 1/1 1/1 1/1 4/4 3/4 4/4 0/0 (3) 1/1 1/1Developer for fotos — — ? 1/3 1/1 4/4 (2) 1/0 0/0 1/3 1/2 0/0 1/0 1/3 1/0 0/0 0/0 (1) 1/1 1/1 3/0 1/0 1/0 0/0 1/1 1/0 1/0Ethyl alcohol C 2H 6O 000064-17-5 96 % F X 1/0 1/3 1/0 1/3 1/1 1/2 1/2 1/1 3/4 1/2 1/3 3/0 1/3 1/1 1/1 1/1 1/1 1/0 3/0 3/3 0/0 1/1 1/1 1/1Formaldehyde solution CH 2O 000050-00-0 40 % T 1/2 2/3 1/3 1/2 1/0 1/2 1/2 1/2 4/4 2/3 2/3 3/3 0/4 1/1 1/1 1/1 1/1 1/0 3/0 (3) 0/0 1/1 1/1 1/1Formic acid CH 2O 2000064-18-6 98-100 % C 1/1 1/2 4/4 3/4 0/0 1/3 4/4 1/3 3/4 3/3 3/4 1/3 3/4 1/1 (1) 1/1 1/1 3/4 4/4 4/4 0/0 1/0 1/3 1/2Fuel oil — — Xn 3/3 3/4 1/0 3/3 1/0 2/3 1/1 1/3 3/4 1/2 1/1 3/3 1/1 1/1 1/1 1/1 1/1 4/4 1/1 1/1 0/0 1/1 1/1 1/1Gasoline C 5H 12-C 12H 26086290-81-5 F, Xn, N X 2/3 3/4 1/0 3/3 (2) 2/3 1/2 3/4 4/4 3/3 2/4 0/0 0/4 1/1 1/1 1/1 1/1 4/4 (1-3) 3/0 0/0 1/1 1/1 1/1Hydrogen chloride HCl 007647-01-0 35 % C 1/1 1/1 4/4 4/4 (4) 1/2 4/4 1/2 3/3 1/1 2/3 3/3 1/3 1/1 1/1 1/1 1/1 3/0 1/2 4/4 0/0 4/4 4/4 4/4Hydrogen fluoride HF 007664-39-3 70 % T+, C 0/0 1/3 4/4 4/4 4/4 0/0 4/4 1/3 4/4 4/4 1/4 3/0 0/0 0/0 (1) 1/1 1/1 3/4 (3) 4/4 0/0 4/4 4/4 4/4Isopropyl alcohol C 3H 8O 000067-63-0 techn. pure F X 1/1 1/1 1/0 1/2 1/0 1/2 1/0 1/1 2/2 1/2 1/2 4/4 1/4 1/1 1/1 1/1 1/1 1/0 1/1 3/3 0/0 (2) (1) (1)Methyl ethyl ketone (MEK) C 4H 8O 000078-93-3 F X 1/3 3/4 1/0 4/4 4/4 4/4 1/2 1/3 4/4 4/4 4/4 4/4 4/4 2/3 1/1 1/1 3/4 3/0 4/4 4/4 0/0 (1) (1) (1)Nitric acid HNO 3007697-37-2 50 % C+ 2/4 3/4 4/4 4/4 (2) 2/4 4/4 3/4 4/4 2/3 2/3 0/0 0/3 1/1 1/1 1/1 1/1 4/4 1/0 4/4 0/0 4/4 1/2 1/2Nitrohydrochloric acid HNO 3+ HCl 008007-56-5 C 4/4 4/4 4/4 4/4 4/4 3/3 4/4 4/4 4/4 4/4 4/4 4/4 3/4 1/1 (2) 1/1 3/0 4/4 4/4 4/4 0/0 4/4 4/4 4/4Phosphoric acid H 3PO 4007664-38-2 85 % C 1/1 1/1 4/4 1/2 0/0 1/2 4/4 1/2 1/2 1/1 1/2 1/1 1/2 1/1 1/1 1/1 1/1 3/0 1/1 4/4 0/0 4/4 2/4 1/3Sodium hydroxide NaHO 001310-73-2 50 % C+ 1/1 1/1 1/0 4/4 4/4 1/1 1/3 1/1 2/2 1/1 1/2 0/0 0/3 1/1 1/1 1/1 3/3 1/0 3/4 3/3 0/0 4/4 1/3 1/3Spirits of Turpentine — 008006-64-2 Xn X 2/2 3/4 1/0 4/4 1/0 3/3 1/1 4/4 4/4 4/4 2/3 4/4 3/3 1/1 1/1 1/0 1/3 4/4 1/1 3/3 0/0 1/1 1/1 1/1Sulfuric acid H 2SO 4007664-93-3 95 % C+ 3/4 3/4 4/4 4/4 4/4 2/2 4/4 3/4 4/4 4/4 2/4 0/0 4/4 1/1 1/1 1/1 1/1 4/4 1/1 4/4 0/0 4/4 1/3 1/3Tetrachloroethylene C 2Cl 4000127-18-4 Xn 4/4 4/4 4/4 4/4 3/4 4/4 1/3 4/4 4/4 4/4 4/4 4/4 3/3 1/1 1/1 1/1 1/1 4/4 2/3 4/4 0/0 (3) 0/0 0/0Trichloroethylene (TRI) C 2HCl 3000079-01-6 100 % Xn 3/4 4/4 3/0 4/4 4/4 4/4 4/4 4/4 4/4 4/4 4/4 4/4 0/4 1/2 1/1 1/0 1/1 4/4 1/3 4/4 0/0 1/3 1/1L 1/1LVinegar C 2H 4O 2000064-19-7 (Xi) 1/1 1/3 4/4 1/2 1/1 1/0 1/3 1/1 1/0 1/0 1/0 3/0 1/1 1/1 1/1 1/1 1/1 1/0 3/3 3/3 0/0 1/3 1/2 1/2Xylene C 8H 10001330-20-7 (F), Xn X 3/4 3/4 1/0 4/4 0/0 3/4 1/2 4/4 4/4 4/4 4/4 4/4 4/4 1/2 1/1 1/0 1/3 4/4 1/3 4/4 0/0 1/1 1/1 1/1Two values are given per substance, left number = value at + 20 °C, right number = value at + 50 °C.1 = resistant, 2 = practically resistant, 3 = partially resistant, 4 = not resistant, 0 = no data available.K = no general information available; L = danger of pitting or stress-cracking corrosion, values in parentheses are estimated values.Hazard notes: C = caustic; F = inflammable; F+ = highly inflammable; O = fire-promoting; T = poisonous; T+ = very poisonous; Xn = slightly poisonous; Xi = irritantImportant noteThe tables headed “Chemical resistance of plastics” and “Properties of plastics materials”have been compiled from information from various producers of raw materials. The figuresrelate exclusively to laboratory tests on raw materials.Plastics items made from these materials are often subject to influences which cannot bedetected in a laboratory test (temperature, pressure, stresses in the material, chemicalsubstances, design features, etc.). For these reasons the figures quoted can serve only as aguideline. In case of doubt we strongly recommend that a test be carried out. No legal claimscan be derived from these figures and we disclaim all liability. The chemical and mechanicalresistance of a product does not suffice for the assessment of its suitability for use, for examplelegislation on flammable liquids (explosion protection) is to be taken into particular consideration.Detailed table can be downloaded free of charge More than 1600 media With viscosity table CAS numbers Simple operation Free of charge Download address:www.buerkle.de/chemical-resistance.html250www.buerkle.de | info@buerkle.de | Hotline +49 (0) 76 35 8 27 95-0

Plastics technology | overview of chemical resistanceE-CTFE Ethylene-chlortrifluorethylene (Halar ® )FEP Fluorinated ethylene-propylene (Teflon ® FEP)PETG PolyethyleneterephthalateFPM/FKM Fluoroelastomer (Viton ® )HDPE High-density polyethyleneLDPE Low-densitiy polyethylenePA PolyamidePC PolycarbonatePFA Perfluoro-alkoxy (Teflon ® PFA)PMP Polymethylpentene (TPX ® )PP PolypropylenePS PolystyrenePSUPTFEPVCPVDFSANSIPolysulfonePolytetrafluoroethylenePolyvinylchloridPolyvinylidenfluorideStyrene-acrylnitrileSilicone rubberPlastics Temperature Sterilization 5) Transparency Flexibility Specific Waterabbreviations max. °C min °C steam 4) gas radiation chemical weight absorption1) 2)121°C ethyleneoxide 2.5 kGy formalin,ethanol g/cm 3 %E-CTFE + 150° - 100° yes yes no yes transparent moderate 1.70 < 0.10FEP + 205° - 255° yes yes no yes transparent very good 2.15 < 0.01FPM + 200° - 20° black good 1.90HDPE + 110° - 50° no yes yes yes transparent stiff 0.95 0.01LDPE + 95° - 50° no yes yes yes transparent excellent 0.92 0.01PA + 90° - 0° no yes yes yes transparent stiff 1.13 1.30PC + 135° - 135° yes yes yes yes clear rigid 1.20 0.35PFA + 250° - 270° yes yes no yes transparent excellent 2.15 0.03PMP + 175° - 150° yes yes yes yes glass-clear stiff 0.83 0.01PP + 135° 0° yes yes no yes transparent stiff 0.90 0.02PS + 70° - 20° no no yes yes glass-clear stiff 1.05 0.05PSU + 165° - 100° yes yes yes clear stiff 1.24 0.30PTFE + 270° - 270° yes yes no yes white excellent 2.25 < 0.01PVC + 70° - 30° no 3) yes no yes clear stiff 1.35 0.06PVDF + 160° - 4° yes yes yes yes transparent stiff 1.78 0.04SAN + 95° - 40° no yes no yes glass-clear stiff 1.03 0.05SI + 180° - 60° yes yes no yes transparent excellent 1.10PETG + 70° + 5° no ? ? yes glass-clear stiff 1.78 0.701)Even higher for short periods2)Brittle temperature3)Except PVC hoses, which can be sterilized with steam at a temperature of 121 °C4)Frequent steam sterilization reduces mechanical stability!5)Clean apparatus with distilled water first (to avoid stress cracking corrosion). In the case ofclosed vessels, remove or slightly open lid, do not close lid tight again until the vessel hascooled down.Substance class at 20 °C ABS ECTFE HDPE LDPE PA PC PMP PP PS PTFE/FEP/PFA PVC SAN SIAldehydes - + + + 0 0 0 + - + - - 0Alcohols alipathic + + + + 0 + + + + + + + +Esters - + 0 0 + - 0 0 - + - - 0Ethers - + 0 - + - - - - + - - -Ketones - 0 0 0 + - 0 0 - + - -Carbohydratesaliphatic - + + 0 + 0 0 + - + + - -aromatic - + + 0 + - - 0 - + - - -halogenated - + 0 - 0 - - 0 - + - - -Acids, weak/dilute 0 + + + 0 0 + + 0 + + 0 0Acids, strong/concentrated - + + + - - + + 0 + + - -Acids, oxidising - 0 0 0 - - 0 0 - + - - -Bases 0 + + + 0 - + + + + + ++ = excellent chemical resistanceThe substance does not result in any damage to the plasticafter 30 days of permanent contact. The plastic may remainresistant for years.0 = good/limited chemical resistanceWithin 7 to 30 days of permanent contact, the substanceprovokes minor damage which may be reversible (softening,swelling, reduction of mechanical strength, discolourations).- = low chemical resistanceNot suitable for permanent contact with this substance.Damage to the plastic may occur immediately (reduction ofmechanical strength, deformation, discolourations, splits,dissolution, risk of breakage).251

Suitable thread adapters | for many container threadsPlastic barrels and containers can have a wide rangeof thread types. Some are standardized according toDIN, BSI or US standards. Other threads are manufacturer-specific.We can supply suitable adapters formost containers so that discharge valves, pumps andother accessories can be safely attached.Various steps are necessary in order to select thecorrect adapter. Proceed as follows:1. First use the thread table to select the containerthread.If possible use calipers for the measurement, althoughmost threads can be measured accuratelyenough with a ruler.If your container has an outer thread you will requirean adapter with an inner thread. Containerswith an inner thread require adapters with anouter thread.2. In the Adapter overview on page 26/27 youwill find the suitable adapter.All thread descriptions refer directly to the adapter.This means that if your container has a ¾" outerthread you will require an adapter with a ¾" innerthread. If you cannot find the necessary adapterhere, or if you cannot determine the thread size,just send use a screw cap and we will send you asuitable adapter.ExampleYour container thread is an outer thread with a diameterof 71 mm. You want to use a PP barrel pumpwith a barrel screw joint. Use the thread table to determinethe type of thread. As it is a 71 mm threadyou will require an adapter with a 71 mm inner thread.The barrel screw joint thread is 2” BSP outer. Thismeans that you need an adapter from 71 mm inner to2" BSP inner. In the Adapter table on page 26 youwill then find the corresponding article number0600-1003.Threads overviewA B C Thread Threadmm mm mm description type53 5 50,5 51 mm, DIN 51*) sawtooth59-60 6 55,8 61 mm, DIN 60 sawtooth61 6 55,8 61 mm, DIN 60 sawtooth71 6 66,5 71 mm, DIN 71 sawtooth59 2,2 57,5 2" BSP/R2" steel drum fine thread sawtooth64,5 5 60 63 mm, 64 mm BSI sawtooth33,5 3 32,7 35 mm round/std.69,5 5,5 65 2" coarse thread Mauser L-ring sawtooth56 3,5 52,5 Tri-Sure/2" coarse thread v. Leer/Tri-sure sawtooth63,2 4,25 57,5 US drum thread sawtooth*) old and alternative thread names are printed semibold252www.buerkle.de | info@buerkle.de | Hotline +49 (0) 76 35 8 27 95-0

Contents | alphabetical orderAAccessories for zone samplers 72AccuOne / EnergyOne 31, 32Adapter set Pump-it ® 14AISI 304, Scoop 132AirJet Mini 39, 241All-layer drill 74All-layer-scratcher 75All-purpose boxes, round 166All-purpose trays 188Aluminum bottle 145, 162Aluminum sampler 112Angled connectors 220Angular beaker 106Anti-static set 24Apron, Plastic 56AquaSampler 121Assistants, Pipette 212Atomizer, Pressure 158BBaffle clips 248Ball valve PP 43Ball valve PP, food 47Ball valves for barrels 43Barrel pump made of stainless steel 21Barrel pump PP 18Barrel pumps for solvents 22Barrel pumps, Gas-tight 28Barrel pumps, PTFE 17Barrel pump, Stainless steel 20Barrel screw joints 25Barrel valve 48Battery-powered Hose pump 117Beaker, Angular 106Beakers, Graduated 203Beakers, Griffin 204Beakers, Laboratory 204BeefSteaker 138Big containers 180Bottle carrier 161Bottle carrier box 161Bottle holder 107Bottle pumps 16Bottles, aluminium 145, 162, 163Bottles, Dropping 160Bottles, Laboratory 151Bottles, Narrow-necked 148Bottles, Round 149Bottles, Spray 157Bottles, UN-approved 161, 163Bottle, Wash 158Bottle, Wide-necked 153Bowls sterilisable 193Bucket HDPE 195Bucket made of PP 193Buckets 193, 194Buckets, Packaging 184, 195Buechner funnel PP 202Bungs PE 246Burettes 198CCables, Lowering 122Canister pumps 23Canisters 172Carrier box, Bottle 161Cheese sampler 97Chemistry scoop 104CheMobil 218ChemoSampler 108Clamps, Hose 224Cleaning balls 249Clean-it 249close-it control seal 88, 89close-it dispenser 93close-it tape 91Compact jerrycan 170Compact jerrycan & Compact stop cock set 45Compact jerrycan & StopCock set 45Compact stop cock 44Connectors 220Container pumps 23Containers, Stacking 177Containers, wide-mouth 176Control seal close-it 89Control seal close-it food 90CupSampler, Liquid 108Cylinders, Graduated 206DDepth catch net 107Desiccator 242Diaphragm pumps 38Dipping bottle 118Dipping bottle Ex 119Dipping bottles 118Dipping vessel 120Dip Sampler, plunging siphon 102Dispenser, bottle attachment 199DispoPipette 124Disposable pipettes LDPE 211Disposable plunging siphon 103Disposables 123Disposable samplers 103Disposal canister 60Disposal containers 60Disposal kegs, wide-mouth containers 179Disposal set 61Dosing machine 54Dosing pumps Dosi-Pump 16Dosi-Pump 16Draining rack, benchtop 197Draining rack, wallmount 196Drain safety stand 55Drill bits for mole 141Drop-Boy 160Dropping bottles 160Drum pump for acids and alkalis 36Drum pump for concentrated acids/alkalis 36Drum pump for mineral oils 37Drum pump for solvents 37Dry ice machine 142, 245EEasySampler 73EasyScoop 132Electric barrel pump Petro 35Electric pumps 31, 32Electroconductive, spigot 46EnergyOne 33Erlenmeyer flasks 210Eye protection / safety goggles 58, 59Eye rinsing bottle 57, 243EyesFresh mini eyewash station 57, 243Eyewash station 57, 243Ffish-clip ® 247Fittings 218Flachmann - the compact jerrycan 170, 171Flat seals 55, 237Flow indicators 218Flow indicators CheMobil PMP 219Flow indicators LiquiMobil SAN 219Flow meters 38FoodScoop 133Foot pump for solvents 22Foot pumps 12Four-sided bucket 193Four-way-connectors 221Funnel, Buechner 202Funnels 200Funnel, Sedimentation 202Funnel stand 201GGas-tight barrel pump PP 28General pump accessories 55GeoSampler 140Gloves, Protective 56, 244Goggles, Safety 58Graduated beakers, stackable 204Graduated beakers with handle 203Griffin beakers 204Gripping tongs 244HHeat protection 244Hose clamp Squeeze-Fix 226Hose clips POM 226Hose couplings 222Hose cutter 216Hose pump, Battery-powered 117Hose tubing stop-cock 228HotGrip 244IIBC discharge valves 49Ice borer 139Ice machine, Dry 142, 245IceSampler 138Immersion cylinder 119Indicators, Flow 218Industrial tubs 175Instrument servers 192Instrument trays 192JJerrycan, compact 170253

Jerrycan pumps 23Jerrycans 172Jerrycans, Safety 182Jerrycans, Storage 172Jerrycans, Wide-necked 173KKegs, Disposal 179LLaboratory beakers/Griffin beakers, PP 204Laboratory bottles made of PET 151Laboratory bottles with graduation PC 151Laboratory bucket 194Laboratory pump mains operated 34Laboratory pump, rechargeable battery 31, 32Laboratory trays / spill throughs set 189Leakproof wash bottle 159Lever pump 30Lever pump aluminum 29Liquid CupSampler 108LiquiDispo 124Liquid-Sampler 105LiquiMobil 218LiquiSampler 101Liqui zone sampler electric 114Liqui zone sampler manual 114Liqui zone samplers 114LiquoFill filler for fluids 50, 51, 52LiquoFill filler, manual mode of operation 52LiquoFill filler, pneumatic mode of operation 52LiquoFill pro filler, semi-automatic drive 52Lowering cables 122MMagic Box 223Magnetic centrifugal pumps 39Manually-operated reels 122Measuring jugs industrial 208Measuring scoops 135Meat sampler 138Mercury collector 242MicroDispo 125MicroSampler 82Milky 85Mini immersion cylinder 120MiniSampler 110MiniSampler PE 111MiniSampler PTFE 111MiniTherm 142Mini ViscoSampler 99Mixing/dosing container 175Mole with handle and bar 141Mortar 249Multi-Bottles with graduation 154Multi sampler 71NNarrow-necked square bottle 150Narrow-neck reagent bottle 152Nipple 238Non-return valves PP 229Non-return valves with conical inlet/outlet 229Novartos 81OOil-free double-diaphragm pump 38Oil pump 29OTAL battery-pump 11, 13OTAL foot pump made of PP 13OTAL foot pump made of PVDF 13OTAL foot pump made of stainless steel 13OTAL foot pumps 12, 13OTAL foot pump with hose and stopcock13OTAL hand pump made of PP 11OTAL hand pump made of PVDF 11OTAL hand pump made of stainless steel11OTAL hand pumps 10, 11OTAL hand pump with hose and stopcock 11OTAL liquid transfer pumps 9OTAL mini pump made of PP 11PPackaging bags with closure 184Packaging bottle 148Packaging bucket 184, 195PastoFill filler for pasty substances 53Peleus ball 212Pendulum beaker PP 106Pendulum beaker stainless steel 106Petrochemicals, Pumps for 29PE tubing 215Pharmaceutical products, Samplers for 81PharmaPicker 83PharmaScoop 133PharmaSpoon 84, 134Photographic trays 190, 191Pigment lance 96Pipette assistants 212Pipette basket 213Pipette rinsing system 213Pipettes 211Pipette stand 213Pipetting-ball, Safety 212Pi-Pump 212Piston pump PP 30Piston pump, Rotary 29Plastic bag 128, 184, 185Plastic scoops and scrapers 136, 137Plunging siphon, Disposable 103PowderDispo 125Powder funnels PP/PE 201PowderProof 76, 77PP barrel pump - discharge hose/stopcock19PP barrel pump - discharge tube 19PP barrel pumps 18, 19Pressure atomizer 158ProfiSampler 112, 113ProfiSampler Aluminum 113Profi Sampler PP 113Protective gear 56, 244Protective gloves 56, 244PTFE barrel pumps Ultrapure 17PTFE Scoop 103PTFE tape 55PTFE tubing 215Pump accessories 25Pump-it ® container pump 14Pump, Lever 30PumpMaster container pumps 15Pump, Piston 30Pump, Rotary piston 29Pumps, Canister 23Pumps, Container 23Pumps for petrochemicals 29Pumps for solvents 22, 23Pumps, Vacuum 240Pürckhauer 140PVC bung 246PVC industrial tubing 214PVC pressure tubing 214QQualiRod conical 97QualiRod cylindrical 97QualiSampler set 100QuickPicker 87RRack, Draining 196Racks, Test-tube 197Rapid couplings 230Reagent bottle 152Rectangular bottle PP transparent 155Reducing hose connectors 222Reels, Manually-operated 122Repro sample divider 68Rotary piston pumps 29Round bottles with screw cap 149Round bottles with snap closure 149Rubber bung 246Rubiflex protective gloves 244Ssafe-it 94SafetyBox 56Safety cans stainless steel 182Safety funnel stainless steel 202Safety jerrycans stainless steel 182Safety pipetting-ball 212Safety storage container stainless steel 183Safety wash bottle 159Sample beaker with cover 144, 169Sample boxes, aseptic 143, 167Sample container, round 143, 168Sampler, All-layer- 71Sampler for ground water 121Sampler for silos 79Sampler, Ice 138Sampler, LiquidCup 108Sampler Liquid CupSampler 108Sampler, Multi 71Samplers for acids 108Samplers for pharmaceutical products 81Samplers for tanks 110, 116Sampler, soil 140Sampler Tubus 85SampleSafe seal 95Sample-spoon 134254www.buerkle.de | info@buerkle.de | Hotline +49 (0) 76 35 8 27 95-0

Sample spoons SteriPlast 127Sample tubes aseptic, with seal 143, 168Sampling bag SteriBag 129Sampling bag, sterilised 128, 185Sampling lance Milky 85Scoop AISI 304 132Scoop for food 133Scoop PTFE 103Scoops and scrapers for foodstuffs 136Scoops and scrapers for industry 137Scoops, Chemistry 104Scoop, Stainless steel 99, 104Scoops, Tele 106Scratcher 75Screw cap, Tubes with 144, 164Sealable wide-mouth containers 176Sealable wide-necked bottles 145, 155Sealing tape 55seal-it 93Seals, Flat 55, 237secure-it 95security seal 93Sedimentation funnel 202Servers, Instrument 192Silicone bungs 246Silicone tubing 216SiloDrill 78, 79Silo sampler SiloPicker 80Siphon with stopcock 40SnowPack dry ice machine 245Socket, inner thread 238Soil sampler GeoSampler 140Soil sampler Puerkhauer 140Soil sampling 140Solvent pump foot operated 22Solvent pump hand operated 23Solvent pumps 22Spade, sampling 126Spatula 98Spectacles, Safety 58Spigot „Air“ 47Spigot „Brass“ 46Spigot Jumbo, with tap 48Spill throughs 188Spiralus 73Spoon, AISI 304 134Spoon, Pharma 84, 134Spoons, Sample 127Spoons, Volumetric 135Spray bottle 157Spray bottle with pump vaporizer 157Stacking containers 177Stainless Steel Barrel Pump 20, 21Stainless steel barrel pump - discharge hose/stopcock 21Stainless steel barrel pump - discharge tube 21Stainless steel barrel pumps 22Stainless steel beaker 107Stainless steel, Safety jerrycans 182Stainless steel scoop 99, 104Standard bungs 246Standardised containers 177Stand, Funnel 201SteriBag StandUp sample bag 129, 185SteriPlast 126SteriPlast sampling spade 126SteriPlast sampling tube 130, 169SteriPlast spatula 127SteriPlast – sterile disposable sampler 126SteriPlast syringe 130StickProof 84Stirring bars, Magnetic 248Stirring, mixing 248Stirring paddle 249StopCock PA, electroconductive 46Stopcocks 42stop-it hose clamps 224stop-it metal 225stop-it with Easy-Click closure 225Storage and stacking containers 177Storage bottles, with/without threaded connector 174Storage jerrycans 172Straight suction tubes for ProfiSampler 113Surface catch net 107Syringe, SteriPlast 130TTall-form bottles 149Tamper proof labels safe-it and secure-it94Tamper proof labels secure-it 95Tape, Sealing 55Target immersion cylinder 121T-connectors 220TeleScoop 106, 107Telescopic rod 106Temperature control 142Test-tube racks 197Thread adapters PP 26Thread fittings 230Three-way valves 227Titrating burette automatic 198Titrating burette plastic 199T-piece 239Transport bottle aluminium UN 163Transport case for straight suction tubes 113Transport containers 177Trays, Instrument 192Trays, Laboratory 188Trays, Photographic 190Tube bend, with cap nut, white 237Tube nozzles, fixed, external thread 236Tubes with screw cap 144, 164Tubing Clamps 224Tubings 214Tubs, round 175Tubus 85Two-way valves 227UUltrapure Barrel pumps 17UN-Bottle 161UniSampler „Ex“ 115UniSampler with hose 115UniSampler with suction lance 116Universal graduated beakers 209Universal storage containers 177Uno sampler 71VVacuMan vacuum or pressure pump 240VacuMan vacuum pump 240Vacuum samplers 110Valve lance 96Valves, Ball 43Valves, Two-way and three way 227Vampire Sampler 117ViscoDispo 124ViscoSampler 100Volumetric flasks PMP 210Volumetric flasks PP 210Volumetric spoons 135WWash bottle 158, 159Wall-mounted dosing machine 54Water-jet pump 241Wax sampler 97Wide-mouth containers 176, 179Wide-mouth containers, HDPE 179Wide-mouth containers with handle 176Wide-necked bottle 153Wide-necked boxes, round 164Wide-necked boxes, square shaped 165Wide-necked jerrycans with/without threaded connector173Wide-necked square bottle 154Wide-necked wash bottle 159Wide-neck reagent bottle 152YY-connectors 220ZZoneDispo 125Zone samplers 70, 71, 72Zone sampler Spiralus 73255

Contents | by item no.Item no. Page Item no. Page Item no. Page Item no. Page Item no. Page Item no. Page0006- 22, 43, 47, 55, 77, 80,83, 111, 122, 214, 215, 2160300- 149, 1500301- 1540302- 1480304- 1610306- 1600307- 1600308- 1490309- 156, 157, 1580310- 158, 1590314- 1490316- 1510317- 1760318- 77, 87, 117, 1530319- 87, 113, 115, 116, 1530320- 1530322- 145, 1550327- 145, 1620329- 1630331- 1500332- 1500338- 1540340- 111, 1520341- 1560342- 108, 1520343- 1550355- 1650356- 1650357- 1650361- 1610370- 1510401- 1740402- 1740431- 1730435- 45, 1710500- 43, 470525- 42, 46, 171, 173, 1740530- 44, 171, 173, 1740533- 470534- 48, 490535- 460536- 480600- 14, 26, 27, 43, 1711105- 1791406- 176, 1791427- 1722306- 193, 1942307- 1952308- 1942327- 184, 1952348- 77, 84, 1842350- 1932502- 21, 58, 592507- 17, 56, 57, 243, 2442515- 57, 2432601- 182, 183, 2023414- 1773418- 1773440- 180, 1813460- 1753480- 1753482- 1753490- 1813600- 77, 79, 80, 81, 87, 96,138, 1414201- 188, 1894202- 1914203- 1914206- 1914207- 1914230- 1924702- 1935000- 135005- 11, 135201- 145202- 155301- 795302- 77, 1175303- 85, 87, 89, 90, 91, 93,94, 955304- 72, 73, 75, 100, 1015305- 111, 1135307- 825308- 1215309- 1225310- 745311- 975313- 985314- 113, 115, 1165315- 1025316- 715317- 71, 725318- 735319- 725320- 1345321- 855322- 875323- 1395324- 84, 133, 1345325- 1305326- 1055327- 1175329- 1145330- 100, 1015331- 1005334- 1355336- 1085338- 845339- 1385340- 805341- 995344- 128, 129, 1855346- 835347- 755350- 140, 1415351- 755353- 1045354- 99, 104, 1075355- 1075356- 1325357- 1085358- 815359- 965360- 735365- 118, 119, 120, 1215369- 965370- 1325371- 1335378- 126, 1275380- 80, 835382- 855384- 1425387- 1035388- 1385389- 1035393- 124, 1255399- 93, 95, 1795400- 60, 615500- 695600- 17, 19, 21, 25, 33, 345601- 21, 255602- 21, 22, 23, 24, 29, 1135603- 22, 235605- 405606- 175607- 165610- 285611- 285613- 305618- 19, 21, 99, 1005620- 2405625- 39, 2415626- 295627- 295690- 21, 555700- 34, 36, 385762- 365763- 375765- 385766- 395780- 355900- 33, 345912- 545913- 52, 536202- 1666203- 143, 1686205- 111, 143, 1686206- 130, 167, 1696207- 143, 1686210- 1666214- 144, 1646250- 1666282- 1647102- 2037103- 144, 1697104- 2037109- 2097110- 2047118- 2027122- 2047162- 2107165- 2107166- 2107204- 2087210- 2087502- 2067503- 2067506- 2077510- 2077550- 2117551- 2127553- 2117554- 2127555- 2117556- 2117559- 1998203- 2498252- 2498253- 2498271- 247, 2488280- 2478281- 2488282- 2498300- 136, 1378501- 2388502- 2388505- 2388506- 2388510- 2398515- 2388516- 2388520- 2398525- 2398530- 2398533- 47, 2378535- 34, 2398536- 2398537- 55, 2378538- 55, 2378539- 2378540- 2298545- 43, 2368546- 2368547- 43, 2368548- 47, 236, 2378605- 2278606- 2278607- 2278608- 2278610- 2288614- 2288618- 2268619- 2258677- 2268678- 2268700- 221, 2228701- 2218703- 2228704- 2228705- 2208706- 2208707- 2208708- 2218710- 221, 2228711- 2208712- 2208713- 2208714- 223, 2298715- 2238720- 2198740- 2328741- 2328742- 2328743- 2328744- 2328750- 2338751- 2338752- 2338753- 2338754- 2338755- 2338760- 2348761- 2348762- 2348763- 2348770- 2358771- 2358772- 2358773- 2358774- 2358775- 2358780- 2318781- 2318782- 2318783- 2318801- 2148802- 2148803- 2168804- 111, 113, 2158805- 111, 113, 117, 2158875- 2148876- 2148878- 111, 113, 117, 2158879- 2158881- 2169602- 2009606- 2019609- 2029614- 1359622- 200, 2019630- 2139635- 1979640- 196, 1979650- 2139668- 2419695- 198, 1999760- 2469763- 2469764- 2469768- 2449789- 2429791- 2429805- 142, 245256www.buerkle.de | info@buerkle.de | Hotline +49 (0) 76 35 8 27 95-0