E-table 2 assembly directions - Coalesse

C-Beam10. Install the bottom and side panelsSnap the curved edge of the plastic bottom access door onto one of the steel beams, aligning the clearanceholes in the plastic with the holes in the steel.Snap on hereBottom access doorPlace the side panel over the beam with the access door sandwiched between the beam and the sidepanel, and screw into place.Screw on the other side panel.On two-base tables, the side panels will be symmetrical. On three or four-base tables, make sure the sidepanel is oriented as indicated by the sticker at one end of the panel (reference step 5).Use machine screws to attach the side panels to:• bottom of the base brackets,• bottom of the C-shaped beams• sides of all the gray insertsMiddle screw into basebracket - see step 6Page 11 of 16939500448 Rev B