horizontal/vertical metal cutting bandsaw - Harbor Freight Tools

3.Improper connection of the equipment-groundingconductor can resultin a risk of electric shock. Theconductor with insulation having anouter surface that is green with orwithout yellow stripes is the equipment-groundingconductor. If repairor replacement of the electric cord orplug is necessary, do not connect theequipment-grounding conductor to alive terminal.8.9.The outlet must be properly installedand grounded in accordance with allcodes and ordinances.Do not use an adapter to connect thistool to a different outlet.Double Insulated Tools: Toolswith Two Prong Plugs4.Check with a qualified electrician orservice personnel if the groundinginstructions are not completely understood,or if in doubt as to whether thetool is properly grounded.5.6.Use only 3-wire extension cords thathave 3-prong grounding plugs and3-pole receptacles that accept thetool’s plug.Repair or replace damaged or worncord immediately.1.To reduce the risk of electric shock,double insulated equipment has a polarizedplug (one blade is wider thanthe other). This plug will fit in a polarizedoutlet only one way. If the plugdoes not fit fully in the outlet, reversethe plug. If it still does not fit, contacta qualified electrician to install theproper outlet. Do not change the plugin any way.2.Double insulated tools may be usedin either of the 120 volt outlets shownin the preceding illustration. (SeeOutlets for 2-Prong Plug.)7. This tool is intended for use on a circuitthat has an outlet that looks likethe one illustrated above in 125 V~3-Prong Plug and Outlet. The toolhas a grounding plug that looks likethe plug illustrated above in 125 V~3-Prong Plug and Outlet.SKU 93762 For technical questions, please call 1-800-444-3353. Page 8