horizontal/vertical metal cutting bandsaw - Harbor Freight Tools

SMALL VERTICAL CUTTING PLATE (194)VERTICAL CUTTINGPLATE (189) SCREW (190)SCREW (190)FLAT WASHER (192)NUT (193)VERTICAL CUTTINGPLATE SUPPORT (191)HEX HEAD BOLT (61)VERTICAL CUTTING PLATE (189)FIGURE ISCREW (190)2. Remove the two Screws (190), andremove the Small Vertical CuttingPlate (194). (See Figure I.)FIGURE J4. Insert one Screw (190) downwardthrough the mounting hole in theVertical Cutting Plate (189). Attachthe top section of the Vertical CuttingPlate Support (191) to the VerticalCutting Plate (189), using one FlatWasher (192) and one Nut (193).Remove the Hex Head Bolt (61).Position the Vertical Cutting PlateSupport against the Body Frame (60).Then firmly re-tighten the Hex HeadBolt. (See Figures I and J.)3.Guide the Saw Blade (82) throughthe slot in the Vertical Cutting Plate(189), and secure it in position withthe two Screws (190).(See Figure I.)SKU 93762 For technical questions, please call 1-800-444-3353. Page 13