Quality Characteristics Quality of Design Quality of Conformance ...

Quality Control/Quality AssuranceQuality Control/Quality AssuranceQuality Assurance…….….encompassesboth quality engineering and quality controlQuality Assurance is…….…..the applicationof standards and procedures to ensure that aproduct or facility meets or exceeds desiredperformance criteriaQuality Assurance is…….…..documentationto verify the results obtained• Quality Engineering describes procedures toensure the design for a structure proceedsaccording to recommended and mandatorycriteria set by:– related trade and professional associations– building code authorities– federal, state, and local government entitiesQuality Control/Quality AssuranceQuality Control/Quality Assurance• Quality Control includes:– setting specific standards for constructionperformance, usually through plans and specs– measuring variances from the standards– taking action to correct or minimize adversevariances– planning for improvements in the standardsThe architects and design engineers set the criteriafor construction, QC ensures that the physicalwork conforms to those standards• Elements of Quality include: Quality Characteristics Quality of Design Quality of ConformanceQualityCharacteristics……• dimension• color• texture• strengthQuality Control/Quality AssuranceQuality of Design…….Quality Control/Quality Assurance• Defines tolerances or ranges of acceptablevariation for attributes such as:– size, spacing, clearance, strength, finish, etc.Designers must understand the impact thathigher standards and tighter tolerances haveon cost– standards of quality should be appropriate tothe intended function and appearance1

HR COIL CRM 03 Dec 2012 1125 35.03 MT 75 Nos 0.500 ‐ 1.000 mm 5.03 MT 950 ‐ 1260 mm 35.03 MT Outside shed 35.03 MT1.500 ‐ 3.000 mm 30 MTHR COIL CRM 03 Dec 2012 1126 18.51 MT 45 Nos 0.500 ‐ 1.000 mm 3.51 MT 950 ‐ 1260 mm 18.51 MT Outside shed 18.51 MT1.500 ‐ 3.000 mm 15 MTCR COIL STRAGHTENED 03 Dec 2012 J241112X1 15.32 MT 2 Nos 0.500 ‐ 1.000 mm 15.32 MT 1150 ‐ 1500 mm 15.32 MT 2500 ‐ 2500 mm 15.32 MTCR COIL STRAGHTENED 03 Dec 2012 J241112X2 16.58 MT 3 Nos 0.500 ‐ 1.000 mm 8.58 MT 910 ‐ 1400 mm 16.58 MT 2500 ‐ 2500 mm 16.58 MT Side wrinkled 3 MT1.200 ‐ 2.000 mm 8 MTCR COIL STRAGHTENED 03 Dec 2012 J241112X3 16.83 MT 2 Nos 0.500 ‐ 1.000 mm 16.83 MT 1150 ‐ 1420 mm 16.83 MT 2500 ‐ 2500 mm 16.83 MT Side wrinkled 1 MTCR COIL STRAGHTENED 03 Dec 2012 J251112 X2 17.58 MT 2 Nos 0.500 ‐ 1.000 mm 12 MT 1050 ‐ 1550 mm 17.58 MT 2500 ‐ 2500 mm 17.58 MT Side wrinkled 1 MT1.200 ‐ 2.000 mm 5 MTCR COIL STRAGHTENED 03 Dec 2012 J251112X1 16.39 MT 2 Nos 0.500 ‐ 1.000 mm 16.39 MT 1000 ‐ 1450 mm 16.39 MT 2500 ‐ 2500 mm 16.39 MTDisclaimer: This material inspection report is produced on a best effort basis and is meant for information only.Before taking buying decision, buyers are strongly advised to inspect the material personally.Mjunction services ltd takes no responsibility for any loss or damage caused due to decisions taken based on information furnished by us.