Operating Manual - Webshop, Gas Analysis Technology

More documents

Recommendations

Info

63 SAFETY INSTRUCTIONSPlease take care of the following basic safety procedures when mounting, starting up oroperating this equipment:Read this operating manual before starting up and use of the equipment. The information andwarnings given in this operating manual must be heeded.Any work on electrical equipment is only to be carried out by trained specialists as per the regulationscurrently in force.Attention must be paid to the requirements of VDE 0100 (IEC 364) when setting high-power electricalunits with nominal voltages of up to 1000 V, together with the associated standards and stipulations.Check the details on the type plate to ensure that the equipment is connected to the correct mainsvoltage.Protection against touching dangerously high electrical voltages:Before opening the equipment, it must be switched off and hold no voltages. This also applies to anyexternal control circuits that are connected.The device is only to be used within the permitted range of temperatures and pressures.Check that the location is weather-protected. It should not be subject to either direct rain or moisture.The device must not be used in hazardous areas.Installation, maintenance, monitoring and any repairs may only be done by authorized personnel withrespect to the relevant stipulations.4 WARRANTYIf the equipment fails, please contact M&C directly or else go through your M&C authorised dealer.We offer a one year warranty as of the day of delivery as per our normal terms and conditions of sale,and assuming technically correct operation of the unit. Consumables are hereby excluded. The termsof the warranty cover repair at the factory at no cost or the replacement at no cost of the equipmentfree ex user location. Reshipments must be send in a sufficient and proper protective packaging.<strong>Gas</strong> sampling and gas conditioning technology3-4.20-ME
75 USED TERMS AND SIGNAL INDICATIONSDANGER!WARNING!CARE!This means that death, severe physical injuries and/or importantmaterial damages will occur in case the respective safety measuresare not fulfilled.This means that death, severe physical injuries and/or importantmaterial damages may occur in case the respective safetymeasures are not fulfilled.This means that minor physical injuries may occur in case therespective safety measures are not fulfilled.CARE!ATTENTION!Without the warning triangle means that a material damage mayoccur in case the respective safety measures are not met.This means that an unintentional situation or an unintentional statusmay occur in case the respective note is not respected.These are important information about the product or parts of theoperating manual which require user’s attention.NOTE!SKILLED STAFFThese are persons with necessary qualification who are familiar withinstallation, use and maintenance of the product.<strong>Gas</strong> sampling and gas conditioning technology3-4.20-ME
Page 1: Operating ManualLow-temperature ele
Page 4 and 5: 4Dear customer,we have made up this
Page 8 and 9: 86 INTRODUCTIONThe patented M&C EC3
Page 10 and 11: 108 TECHNICAL DATACooler series EC
Page 12 and 13: 1210 FUNCTIONThe patented M&C EC30(
Page 14 and 15: The heat energy from the cooling sy
Page 16 and 17: 16N O TE!When fixing the connectors
Page 18 and 19: 1814 START-UPThe control electronic
Page 20 and 21: 2015CLOSING DOWNNOTE!The location f
Page 22 and 23: 22Take away conveying beltconnector
Page 24 and 25: 2417 TROUBLE SHOOTINGTroubleshootin
Page 26 and 27: 2618EC AUTOMATICCONTROL BOARDFigure
Page 28 and 29: 2818.2 TEMPERATURE SETTING FOR THE
Page 30 and 31: 30Figure 14 Sensor voltage as funct
Page 32 and 33: 3220.1 FUNCTION SEQUENCE OF THE EC3
Page 34 and 35: 3421 SPARE PARTS LISTWear, tear and
Page 36 and 37: 36Sample outlet dew point (ambient
Page 38 and 39: 38Figure 18 Circuit Diagram EC-30Ga
Page 40: 40Figure 20 Wiring plan automatic c

Operating Manual - Webshop, Gas Analysis Technology

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?