Ei605TY - Optical with 10 Year Battery - Ei Electronics

Model Ei605TY OpticalTechnical SpecificationSensor:Sensitivity:Airspeed:Button Test:Hush:Supply Voltage:Power-On Indicator:Optical, uses light scatter fromsmoke particlesComplies with the requirements ofBS EN 14604: 2005Essentially immune to the effectof airspeed.Simulates the effect of smoke tocheck chamber, electronics andhorn.Silences nuisance alarm.Automatically resets afterapproximately 10 minutes.10 Year Lithium Cells with2,000mAh capacity.Red LED flashes through coverevery 40 secondsAlarm:Piezoelectric-horn (built-in)Alarm Sound Output: 85dB (minimum) at 3mTemperature Range: 0 to 40°CHumidity Range: 15% to 95% Relative Humidity –non condensingFixing:Dimensions:Weight:Warranty:Approvals:Screw fixings supplied115mm (diameter) x 45mm(height)200 grams5 year (limited) warrantySpecifications are subject to changeVdS approved toBS EN14604:2005, CE approved,Manufactured to ISO 9001:2000quality standards.Installation & PlacementAlarms should be placed in accordance with the general guidelines shown inthe diagram above. These recommendations are based on the problem ofareas of “dead air” close to corners of rooms and apexes of ceilings, whichcould result in the prevention of smoke reaching the smoke detectorPlease consult the Instruction Leaflet supplied with the Ei605TY for detailedinstructions as to how to correctly install and position the smoke detectorImportant Precaution:Do not install the actual smoke/heatalarm itself in new or renovatedbuildings until all work is completed(including floor coverings) and thebuilding has been fully cleaned.(Excessive dust and debris frombuilding work can contaminate thesmoke chamber and cause problems,and it will also invalidate the guarantee).If it must be installed, cover itcompletely, particularly around theedges, with a dust cover (eg. a plasticbag), until all cleaning is finished.Specifications are subject to changeShannon Free Zone, Shannon, Co. Clare, Ireland.Ph.+353 61 471277 Fx.+353 61 471053Email. eielectronics@eiltd.ieWeb: www.eielectronics.comE & OE As our policy is one of continuous product development, we reserve the right to alter product details without prior notice. Ei605TYW 131010