Features Operation Transformer Parallel Control Relay Application

Australian ContentUnless otherwise stated the product(s) quotedare manufactured by RMS at our productionfacility in Melbourne Australia. Approximately60% of our sales volume is derived fromequipment manufactured in house with a localcontent close to 90%. Imported componentssuch as semi-conductors are sourced from localsuppliers & preference is given for reasonablestock holding to support our build requirements.Quality AssuranceRMS holds NCSI (NATA Certification ServicesInternational), registration number 6869 for thecertification of a quality assurance system toAS/NZS ISO9001-2000. Quality plans for allproducts involve 100% inspection and testingcarried out before despatch. Further details onspecific test plans, quality policy & proceduresmay be found in section A4 of the RMS productcatalogue.Product PackagingProtection relays are supplied in secureindividual packing cardboard boxes with mouldedstyrene inserts suitable for recycling. Eachproduct & packing box is labeled with the productpart number, customer name & order details.Design ReferencesThe products & components produced by RMSare based on many years of field experiencesince Relays Pty Ltd was formed in 1955. A largepopulation of equipment is in service throughoutAustralia, New Zealand, South Africa & SouthEast Asia attesting to this fact. Specific product &customer reference sites may be provided onapplication.Product WarrantyAll utility grade protection & auxiliary relayproducts, unless otherwise stated, are warrantedfor a period of 24 months from shipment formaterials & labour on a return to factory basis.Repair of products damaged through poorapplication or circumstances outside the productratings will be carried out at the customer’sexpense.Standard Conditions of SaleUnless otherwise agreed RMS Standard Terms &Conditions (QF 907) shall apply to all sales.These are available on request or from our website.Relay Monitoring Systems Pty Ltd6 Anzed Court, Mulgrave, Victoria 3170, AUSTRALIA© 2008 Relay Monitoring Systems Pty LtdDue to RMS continuous product improvement policy this information is subject to change without notice.