10.07.2015 Views

friction clutches - Arten Freios e Embreagens Industriais

friction clutches - Arten Freios e Embreagens Industriais

friction clutches - Arten Freios e Embreagens Industriais

SHOW MORE
SHOW LESS

Create successful ePaper yourself

Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.

Table of Contents◗TENSION CONTROLSWeb ProductsTA 100/TA 110 TENSION AMPLIFIERSSuperior signal conditioning for web tension sensors.TA 100/TA 100Aand TA 110/TA 110ATension Amplifiers314Features and benefits• Low cost signal conditioningfor LVDT or strain gauge tensionsensors—easy to cost justify• Wide tension range—flexible installation• Chassis or enclosed versions—for easy, flexible installationSpecificationsModel TA 100 - 110 VAC, Enclosed Product Number 964400Model TA 100A - 24 VDC, Enclosed Product Number 964411Model TA 110 - 110 VAC, Chassis Product Number 964401Model TA 110A - 24 VDC, Chassis Product Number 964412Input power24 VDC or 110 VAC, 50/60 Hz, 1 Phase, Prewired 8 ft. [2.4 m] power cord for 110 VAC (fused)UL and ULC Listed Enclosed models onlySensor compatibility Any Nexen MB or SW sensorsOutputs0—10 VDC, 4—20 mAOperating temperature 50°F to 120°F (10°C to 50°C)Operating humidityStorage temperatureStorage humidity• Ideal for use with PLC’smotor controllers or datalogging systems where localreadout is not required—saves cost• Both 0-10 VDC and 4-20 mAoutputs—easy to interface10% to 90% relative non-condensing-30°F to 150°F (-35°C to 65°C)10% to 90% relative non-condensingThese Tension Amplifiers bothinterface with LVDT tensionsensor or strain gauge sensorsto measure tension in acontinuous web strip or strandof material during converting orprinting. The material can bepaper, film, foil, rubber, wire, metalstrip, non-wovens or textiles usedin continuous process.These amplifiers are ideal whenyou need low cost, accuratetension measurement of a webprocess interfaced with machinecontrols. Applications includeinput for data loggers, processcontrollers. Host computers orother applications that require aprecise tension interface.Precision input fromeither LVDT or straingauge sensors.Use either the TA 100 or TA 110amplifier with any Nexen MB orSW sensors.They provide an excitationsignal to the sensors and thenseparately amplify the returnsignals from each sensor. Thesignals from both sensors arethen added to provide the 0-10VDC or 4-20mA proportionaltension output.Choose chassis-mountmodel for concealedOEM installations.The chassis-mount style of theTA 110 makes it ideal forinstallations in cabinets orenclosures.Choose fully enclosedmodel for easy retrofit.The TA 100 comes completewith a NEMA-12 enclosure,making is a good choice whenadding on to an existing tensioncontrol drive or other retrofitinstallation.• NEMA-12 enclosure(TA 100 & TA 100A)• Pre-wired 8 ft. [2.4 m] Power cordincluded with TA100• UL and UL C Listed,Enclosed models only

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!