TERRA HGL/BA with
TERRA HGL/BA with
TERRA HGL/BA with
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
T HE POWER FAMILY<br />
3.1.1. System operating mode<br />
In the submenu for the System operating mode it is<br />
possible to select between the functions Off, Automatic<br />
and Tapwater. Usually the Automatic function is<br />
set. The arrow keys are used to change between the<br />
operating modes.<br />
Operating modes<br />
System operating modes parameters<br />
Par. No. Name Description<br />
PROGO Off The heat pump is not in operation unless the frost-proof function is active.<br />
PROGO Automatic The heat pump runs in the heating mode in accordance <strong>with</strong> the set heating<br />
times.<br />
PROGO Hot water The heat pump only runs for storage tank charging <strong>with</strong>out heating mode.<br />
PROGO Tapwater charging once The heat pump performs the one storage tank charging procedure. After comple-<br />
only<br />
tion of the storage tank charging, the heat pump continues to run in the previous<br />
operating mode.<br />
3.1.2. Holiday program<br />
In the holiday program submenu it is possible to set<br />
a date range during which the heating and cooling<br />
circuits can be operated in the ECO mode. During<br />
this time, no storage tank charging is carried out.<br />
After the set holiday program has elapsed, all the<br />
consumers are administered in accordance <strong>with</strong> the<br />
timer program.<br />
The date for the holiday program can be set by using<br />
the right-hand selection key and the arrow keys. After<br />
completing the setting, the date is saved using the<br />
right-hand selection key.<br />
3.1.3. Party function<br />
The consumers are controlled by the ECO mode up<br />
to the end date / time entered.<br />
The setting is carried out using the right-hand selection<br />
key and the arrow keys. After completing the setting,<br />
the date and time are saved using the right-hand<br />
selection key.<br />
The party function is only active if the individual<br />
heating and cooling circuits are set<br />
to automatic (timer program).<br />
(C) IDM ENERGIESYSTEME GMBH Operating Manual NAV 1.0 9<br />
1<br />
2<br />
3<br />
4<br />
5<br />
6<br />
7<br />
8<br />
9<br />
10<br />
11<br />
12<br />
13<br />
Operating modes