TERRA HGL/BA with
TERRA HGL/BA with TERRA HGL/BA with
1 2 3 4 5 6 7 8 9 10 11 12 13 Operating modes 3. Allgemeine Operating modes Beschreibung 3.1. Operating Modes via the Main Menu The individual heating circuits can be parameterised via the submenu "Operating Modes". In order to access the "Operating Modes" menu, use the arrow keys to select the symbol for operating modes in the main menu. As soon as the symbol has a black background, it is possible to open the respective subprogram by using the right-hand selection key. In the operating mode menu, the operating modes of the system in the individual heating circuits can be selected. By using the arrow keys it is possible to move between the menu items. The current set status is always displayed (e.g. operating mode System - Automatic) on the right next to the operating function. In order to carry out a setting, the desired menu item (e.g. operating mode System) must have a black background. The respective submenu can be accessed by using the right-hand selection key. It is possible to return to the superordinate menu using the left-hand selection key and the command "Back". Depending on the parameterisation of the heat pump, only the heating circuits using the operating mode menu are shown. 8 Operating Manual NAV 1.0 T HE POWER FAMILY (C) IDM ENERGIESYSTEME GMBH
T HE POWER FAMILY 3.1.1. System operating mode In the submenu for the System operating mode it is possible to select between the functions Off, Automatic and Tapwater. Usually the Automatic function is set. The arrow keys are used to change between the operating modes. Operating modes System operating modes parameters Par. No. Name Description PROGO Off The heat pump is not in operation unless the frost-proof function is active. PROGO Automatic The heat pump runs in the heating mode in accordance with the set heating times. PROGO Hot water The heat pump only runs for storage tank charging without heating mode. PROGO Tapwater charging once The heat pump performs the one storage tank charging procedure. After comple- only tion of the storage tank charging, the heat pump continues to run in the previous operating mode. 3.1.2. Holiday program In the holiday program submenu it is possible to set a date range during which the heating and cooling circuits can be operated in the ECO mode. During this time, no storage tank charging is carried out. After the set holiday program has elapsed, all the consumers are administered in accordance with the timer program. The date for the holiday program can be set by using the right-hand selection key and the arrow keys. After completing the setting, the date is saved using the right-hand selection key. 3.1.3. Party function The consumers are controlled by the ECO mode up to the end date / time entered. The setting is carried out using the right-hand selection key and the arrow keys. After completing the setting, the date and time are saved using the right-hand selection key. The party function is only active if the individual heating and cooling circuits are set to automatic (timer program). (C) IDM ENERGIESYSTEME GMBH Operating Manual NAV 1.0 9 1 2 3 4 5 6 7 8 9 10 11 12 13 Operating modes
- Page 1 and 2: 812202 Rev.0 TERRA HGL/BA with NAVI
- Page 3 and 4: T HE POWER FAMILY Terra heat pumps
- Page 5 and 6: T HE POWER FAMILY 1.1.8. Installing
- Page 7: T HE POWER FAMILY 2.3. Displays in
- Page 11 and 12: T HE POWER FAMILY 4.1. Temperature
- Page 13 and 14: T HE POWER FAMILY 5.1. Time Setting
- Page 15 and 16: T HE POWER FAMILY Setting the times
- Page 17 and 18: T HE POWER FAMILY 5.1.5. Fan speed
- Page 19 and 20: T HE POWER FAMILY 6.1.3. Heat meter
- Page 21 and 22: T HE POWER FAMILY Sensor error Erro
- Page 23 and 24: Notes T HE POWER FAMILY Notes (C) I
1<br />
2<br />
3<br />
4<br />
5<br />
6<br />
7<br />
8<br />
9<br />
10<br />
11<br />
12<br />
13<br />
Operating modes<br />
3. Allgemeine Operating modes Beschreibung<br />
3.1. Operating Modes via the Main Menu<br />
The individual heating circuits can be parameterised<br />
via the submenu "Operating Modes".<br />
In order to access the "Operating Modes" menu, use<br />
the arrow keys to select the symbol for operating<br />
modes in the main menu. As soon as the symbol has<br />
a black background, it is possible to open the respective<br />
subprogram by using the right-hand selection<br />
key.<br />
In the operating mode menu, the operating modes of<br />
the system in the individual heating circuits can be<br />
selected.<br />
By using the arrow keys it is possible to move between<br />
the menu items. The current set status is always displayed<br />
(e.g. operating mode System - Automatic) on<br />
the right next to the operating function.<br />
In order to carry out a setting, the desired menu<br />
item (e.g. operating mode System) must have a<br />
black background. The respective submenu can be<br />
accessed by using the right-hand selection key. It is<br />
possible to return to the superordinate menu using<br />
the left-hand selection key and the command "Back".<br />
Depending on the parameterisation of the heat pump,<br />
only the heating circuits using the operating mode<br />
menu are shown.<br />
8<br />
Operating Manual NAV 1.0<br />
T HE POWER FAMILY<br />
(C) IDM ENERGIESYSTEME GMBH