TERRA HGL/BA with
TERRA HGL/BA with TERRA HGL/BA with
1 2 3 4 5 6 7 8 9 10 11 12 13 Information 6. Allgemeine InformationBeschreibung 6.1. Information via the Main Menu Under the fourth menu item of the main menu, various status requests regarding the system can be made. 6.1.1. Inputs / outputs Via the Inputs / Outputs Menu, the status of all inputs (sensors, digital inputs), as well as the status of the outputs ( analogue outputs, digital outputs) can be requested. The status request can be helpful during start-up as well as when solving errors. Requests Inputs / Outputs Par. No. Name Description - Sensor Current temperatures of the respective sensor in °C - Digital inputs Status of the digital inputs (O- Open, C - Closed) - Analogue outputs Display of the voltage at the outputs (0-10V) 18 Bedienungsanleitung NAV 1.0 T HE POWER FAMILY - Digital outputs Display of the modulation in % Status (Off - On) - Bus connection This is where the current status of the cascades CAN - Bus participants is displayed. 6.1.2. System information In the submenu System Information, the current software version, as well as the total times for the individual operating modes, the running times for the heating stages and the switching signals of the heating stages that have been performed by the heat pump are shown in hours. (C) IDM ENERGIESYSTEME GMBH
T HE POWER FAMILY 6.1.3. Heat meter If a heat meter is installed, under the menu item Heat Meter it is possible to request the heating and cooling performance in [kW]. Furthermore, the current actual performance of HP fl ow and HGL fl ow is shown in [W]. 6.1.4. GSM Module Via the submenu "GSM Module“ the current status, as well as the signal quality, is displayed via the GSM antenna. The GSM Module allows storing three mobile phone numbers which, in the event of failure, can be reported via SMS (see operating instructions GSM Module). If no GSM Module is installed, No is displayed at "SMS Modul Ready". The SimCard State parameter provides the current status of the SimCard. When operating correctly, SimCard State 3 is displayed. 0 ..... Initialisation 1 ..... SimCard not used 2 ..... SimCard used 3 ..... SimCard ready 4 ..... SimCard error 5 ..... PIN OK - initialisation 6 ..... PIN request not deactivated Before the SimCard can be used the PIN request must be deactivated via a mobile phone. Information (C) IDM ENERGIESYSTEME GMBH Bedienungsanleitung NAV 1.0 19 1 2 3 4 5 6 7 8 9 10 11 12 13 Information
- Page 1 and 2: 812202 Rev.0 TERRA HGL/BA with NAVI
- Page 3 and 4: T HE POWER FAMILY Terra heat pumps
- Page 5 and 6: T HE POWER FAMILY 1.1.8. Installing
- Page 7 and 8: T HE POWER FAMILY 2.3. Displays in
- Page 9 and 10: T HE POWER FAMILY 3.1.1. System ope
- Page 11 and 12: T HE POWER FAMILY 4.1. Temperature
- Page 13 and 14: T HE POWER FAMILY 5.1. Time Setting
- Page 15 and 16: T HE POWER FAMILY Setting the times
- Page 17: T HE POWER FAMILY 5.1.5. Fan speed
- Page 21 and 22: T HE POWER FAMILY Sensor error Erro
- Page 23 and 24: Notes T HE POWER FAMILY Notes (C) I
T HE POWER FAMILY<br />
6.1.3. Heat meter<br />
If a heat meter is installed, under the menu item<br />
Heat Meter it is possible to request the heating and<br />
cooling performance in [kW]. Furthermore, the current<br />
actual performance of HP fl ow and <strong>HGL</strong> fl ow is<br />
shown in [W].<br />
6.1.4. GSM Module<br />
Via the submenu "GSM Module“ the current status,<br />
as well as the signal quality, is displayed via the GSM<br />
antenna.<br />
The GSM Module allows storing three mobile phone<br />
numbers which, in the event of failure, can be reported<br />
via SMS (see operating instructions GSM Module).<br />
If no GSM Module is installed, No is displayed at<br />
"SMS Modul Ready".<br />
The SimCard State parameter provides the current<br />
status of the SimCard. When operating correctly,<br />
SimCard State 3 is displayed.<br />
0 ..... Initialisation<br />
1 ..... SimCard not used<br />
2 ..... SimCard used<br />
3 ..... SimCard ready<br />
4 ..... SimCard error<br />
5 ..... PIN OK - initialisation<br />
6 ..... PIN request not deactivated<br />
Before the SimCard can be used the PIN<br />
request must be deactivated via a mobile<br />
phone.<br />
Information<br />
(C) IDM ENERGIESYSTEME GMBH Bedienungsanleitung NAV 1.0 19<br />
1<br />
2<br />
3<br />
4<br />
5<br />
6<br />
7<br />
8<br />
9<br />
10<br />
11<br />
12<br />
13<br />
Information