TERRA HGL/BA with
TERRA HGL/BA with TERRA HGL/BA with
1 2 3 4 5 6 7 8 9 10 11 12 13 Operating modes 3. Allgemeine Beschreibung Operating modes 3.1.4. HC mode All parameterised heating circuits are shown in the operating modes menu. It is possible to change between operating modes for the respective heating circuits using the arrow keys. 10 Operating Manual NAV 1.0 T HE POWER FAMILY Heating circuit operating modes parameters Par. No. Name Description HC..01 Off The heating circuit is not in operation unless the frost-proof function is active. HC..01 Timer program The heating circuit is operated according to the set heating times with Day set room temperature. Four heating times can be set per day for the heating circuit. HC..01 Normal The heating circuit is operated constantly with the Normal Heating set room temperature. HC..01 ECO The heating circuit is operated constantly with the ECO Heating set room temperature. HC..01 Manual heating The outside temperature for the calculation of the individual heating circuits is replaced with 7°C. (C) IDM ENERGIESYSTEME GMBH
T HE POWER FAMILY 4.1. Temperature Settings via the Main Menu The temperatures for fresh water capture can be set using the second menu item in the main menu, as well as the temperatures for the individual heating circuits. 4.1.1. Fresh water temperature setting Fresh water temperature parameters Par. No. Name Description 4. Temperature Settings FW30 Fresh water temperature The fresh water temperature gives the set temperature for the tapwater capture. It is possible to carry out this setting over the temperature range from 35.00°C to 60.00°C. The desired set temperature is set using the arrow keys. The new temperature value is confi rmed by using the right-hand selection key. 4.1.2. Heating circuits temperature setting The parameters that can be set for the heating circuit temperatures are in accordance with the machine confi guration. Only the setting parameters that are relevant with regard to the machine confi guration are displayed. Heating circuit temperatures parameters Par. No. Name Description HC104 Normal Heating Room Temp. HC105 ECO Heating Room Temperature Upon delivery of the equipment, the default value is set at 46.00°C. Note: 60°C is only possible for heat pumps using the refrigerant R134a. The Normal Heating Room Temperature can be set between 15.00°C and 30.00°C. The duration during which the temperature is maintained depends on the respective heating program. The ECO Heating Room Temperature gives the temperature outside the selected heating times. The ECO Heating Room Temperature can be set between 10.00°C and 25.00°C. (C) IDM ENERGIESYSTEME GMBH Operating Manual NAV 1.0 11 1 2 3 4 5 6 7 8 9 10 11 12 13 Temperature Settings
- Page 1 and 2: 812202 Rev.0 TERRA HGL/BA with NAVI
- Page 3 and 4: T HE POWER FAMILY Terra heat pumps
- Page 5 and 6: T HE POWER FAMILY 1.1.8. Installing
- Page 7 and 8: T HE POWER FAMILY 2.3. Displays in
- Page 9: T HE POWER FAMILY 3.1.1. System ope
- Page 13 and 14: T HE POWER FAMILY 5.1. Time Setting
- Page 15 and 16: T HE POWER FAMILY Setting the times
- Page 17 and 18: T HE POWER FAMILY 5.1.5. Fan speed
- Page 19 and 20: T HE POWER FAMILY 6.1.3. Heat meter
- Page 21 and 22: T HE POWER FAMILY Sensor error Erro
- Page 23 and 24: Notes T HE POWER FAMILY Notes (C) I
1<br />
2<br />
3<br />
4<br />
5<br />
6<br />
7<br />
8<br />
9<br />
10<br />
11<br />
12<br />
13<br />
Operating modes<br />
3. Allgemeine Beschreibung<br />
Operating modes<br />
3.1.4. HC mode<br />
All parameterised heating circuits are shown in the<br />
operating modes menu. It is possible to change<br />
between operating modes for the respective heating<br />
circuits using the arrow keys.<br />
10<br />
Operating Manual NAV 1.0<br />
T HE POWER FAMILY<br />
Heating circuit operating modes parameters<br />
Par. No. Name Description<br />
HC..01 Off The heating circuit is not in operation unless the frost-proof function is active.<br />
HC..01 Timer program The heating circuit is operated according to the set heating times <strong>with</strong> Day set<br />
room temperature. Four heating times can be set per day for the heating circuit.<br />
HC..01 Normal The heating circuit is operated constantly <strong>with</strong> the Normal Heating set room<br />
temperature.<br />
HC..01 ECO The heating circuit is operated constantly <strong>with</strong> the ECO Heating set room<br />
temperature.<br />
HC..01 Manual heating The outside temperature for the calculation of the individual heating circuits is<br />
replaced <strong>with</strong> 7°C.<br />
(C) IDM ENERGIESYSTEME GMBH
Change language