View - METZNER Maschinenbau GmbH

technical dataPerformance DataMetzner CT 4100Corrugated tube diameter min. 1)4.5mmCorrugated tube diameter max. 1)35mmFeeding speed max. 2)90 m/minTechnical DataElectrical connection230 V, 50/60 Hz, 1,2 APower sourceelectro-pneumaticCompressed air connection6 barDimensions (LxWxH)820 x 810 x 480mm 3)Weight95 kgEquipmentCutting systemTube cutLength slitting unit -Feeding systemBelt feedsInterfaces for printing¢Interfaces for peripheral equipment•Interfaces for IT network 4) ¢Metzner CT 41504.5mm35mm90 m/min230 V, 50/60 Hz, 1,2 Aelectro-pneumatic6 bar820 x 810 x 480mm 3)100 kgTube cut•Belt feeds¢•¢Metzner CT 42004.5mm35mm90 m/min230 V, 50/60 Hz, 1,2 Aelectro-pneumatic6 bar740 x 845 x 480mm 3)120 kgRotary cut-Belt feeds¢•¢Metzner SM 40004.5mm40mm160 m/min230 V, 50/60 Hz, 1,5 Aelectro-pneumatic6 bar1215 x 1175 x 1400mm200 kgLaser & toothed wheel-Toothed wheel feeds¢•¢1)depending on material | 2) infinitely adjustable | 3) machine height with controls 710mm | 4) in combination with optional PC•= standard, ¢ = optional, - = not available | Specifications are subject to change without notice.Metzner corrugated tube cutting machines process corrugatedtubes reliably and precisely. With our long years of experiencein corrugated tube processing, we know all about the challengespresented by some tubes and are thus prepared forthem. Our wide spectrum of standard equipment ensures thebest possible processing of your corrugated tubes.3. Fully integral lengthways slitting unit: The Metzner CT 4150offers an integrated longitudinal slitting unit for automatic slitting of unslitcorrugated tubes. With the practical height adjustment of the circularblade via a hand wheel, you can set the cutting height of the slittingblade for each different tube diameter.1. Optimal accommodation of material requirements bymaterial-specific feed system: for each type of corrugated tube,our corrugated tube processing machines offer the optimal feed system:precise and powerful belt conveyors for unslit tubes, pin-point accuratetransport of slit tubes by specially matched gears.2. Very short changeover times: Metzner corrugated tube machinesprocess tubes from 4.5mm up to 40mm reliably and with precision.When frequent material changes are necessary, short changeovertimes are particularly important. Thanks to the Metzner »Quick ChangeSystem«, which assists in rapid guide changing, material changes areperformed easily and without significant downtime.4. Outstanding productivity: The unique combination of superiorconveyor speed (CT 4000 series 90 m/min and with the SM 4000 even160 m/min) and the shortest cutting times makes the CT 4000 series akey to increasing the productivity of your processing line.22