View - METZNER Maschinenbau GmbH

corrugated tube processingp o w e r f u l p r e c i s i o n c u t t i n g m a c h i n e s f o r s l i t a n d u n s l i t c o r r u g a t e d t u b e sStandard, split or corrugated tubes with muffs and flexible conduits are used forprotecting cables and wiring harnesses. Cutting these protective coverings to lengthdepends on cutting accurately on the crest of the ridge. Otherwise sharp cut edgesare formed which results in damage to the cables.Metzner corrugated tube cutting machines offer absolute precision with the cut on the crest of thecorrugation. All types of corrugated tube – slit, unslit, re-sealable or with muffs – are cut reliablyand precisely. The machines offer processing for corrugated tubes from 4.5mm up to 35mm diameter.This wide spectrum is unique and makes these models a future-proof investment.High-performance sensors guarantee reliable reading of the tube profile and place the cut preciselyon the top or in the valley – providing just the processing result you expect.The patented Metzner SM 4000 with »Laser toothed wheel« system is the only solution available inthe market to process pre-slit corrugated tube. The material specific feed wheels guarantee a formfitand twist proof feed of the pre-slit material. The laser sensor controls the position of the feedwheels and releases the blade precisely on the crest of the ridge - with precise repeatability and upto 8000 cuts per hour.20