View - METZNER Maschinenbau GmbH

Processing possibilities with Metzner AM machinesAM 2000AM 3300AM 3500AM 3550AM 3550 SRAM 3700AM 3750AM 4200AM 4300AM 4400AM 4500AM 5300AM 5350Cut-to-lengthStripping with partial and full pull-off• • • • • • • • • • • • •• • • • • • • • • • • • •Window stripping-• • • -• • • • • • • •Extremely long pull-off in multiple stages-• • • -• • ----• •Jacket stripping of multi conductor cables• • • • • • • • • • • • •Outer sheath and inner strands processing (dependingon material)-• • • • • • • • • • • •Flat ribbon stripping and inner strands processing-¢¢¢-¢¢----¢¢Incise cutting and length slitting-• • • -• • ----• •Stripping of very thin insulations-• • • • • • • • • • • •Multi-step stripping of multi-conductor cables andprotection cap (depending on material)-• • • -• • • • • • • •Metal braid stripping with protection cap-• • • -• • ----• •Multi-step stripping-• • • • • • • • • • • •Multi-step processing of coaxial cables---• • -• -----•• = standard, ¢ = optional, - = not available | Specifications are subject to change without notice.blade typesFig. 1 Fig. 2 Fig. 3 Fig. 4 Fig. 5 Fig. 6 Fig. 7Fig. 1 V-blade for cable cut-to-lengthFig. 2 Radius V-blade for cut-to-length and strippingFig. 3 Double radius V-blade for cutting through very thick cablesFig. 4 Radius blade for stripping the insulationFig. 5 Slitting blade for lengthways slitting of the insulationFig. 6 Flat blade for processing flat cablesFig. 7 Customer-specific profile blade for processing very thin wireand other demanding processesThe blades shown are some examples. For every type of cable, there are many different blades, which are matched to your specific requirements.14