Edelbrock Performer Series Carb - Original Parts Group

Edelbrock PartsEdelbrock Choke Cap KitEdelbrock InvertedFlare Fitting$24.95Includes choke cap, gaskets, 3 screws and 3 locking tabs.CH23803 (Edel. # 1474)........................................................ KIT 24.95Edelbrock Banjo Fitting$11.95Fitting has 5/8"-20 thread on the carb side and a 3/8" inverted flare on the inletside for either a steel or aluminum hard line.CH23804 (Edel. # 8090)........................................................ each 11.95Edelbrock EGR Adapter$10.95Fitting can be rotated 360 degrees and allows you to aim your fuel inlettowards the front or rear of the carb for clearance under a drop base aircleaner.CH23805 (Edel. # 8089)........................................................ each 10.95Edelbrock Step-Up SpringAssortment$44.95This adapter will reposition the EGR valve to allow installation of 1400 series carbswithout the use of spacers. Designed for use on 3706 and EDL-3706 manifolds.Comes with bolts and gaskets.CH23806 (Edel. # 1476)........................................................ KIT 44.95Edelbrock AcceleratorPump Nozzles$5.95Made for square-bore Performer carbs, and comes with 5 pair of step-upsprings. Includes one pair of 3" HG (blue), 4" H (yellow), 5" HG (orange),7" HG (pink) and 8" HG (plain). Change your fuel curve and the rate of fuelenrichment.CH23808 (Edel. # 1464)........................................................ set 5.95$23.95Includes .024", .033" and .043" nozzles and gaskets.CH23810 (Edel. # 1475)........................................................ set 23.95162