Edelbrock Performer Series Carb - Original Parts Group
Edelbrock Performer Series Carb - Original Parts Group
Edelbrock Performer Series Carb - Original Parts Group
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
<strong>Carb</strong>uretors<strong>Edelbrock</strong> Thunder <strong>Series</strong>AVS <strong>Carb</strong>uretorsStreetmaster RochesterQuadrajet <strong>Carb</strong>uretorsC990114STARTING AT$329.95The new <strong>Edelbrock</strong> Thunder <strong>Series</strong> AVS (Air Valve Secondary) carbs are aleap ahead in carb performance. With the new Qwik-Tune adjustablesecondary air valve you can fine tune the opening rate to match your engine’srequirements. You can delay or speed up the opening with just an adjustmentwithout having to change any parts. Another outstanding feature is the dualfuel inlet capability that helps prevents fuel starvation in corners and on hardlaunches. Check out the new dual feed fuel line that bolts right on to theThunder carb. The front of the Thunder carbs have been CNC-machined andthe throttle lever and adjustment hardware have black accents for a new,distinctive appearance. These powerful and dependable carbs are availablein 650 and 800 cfm capacity.CH25469 650 cfm (manual choke) (Edel. # 1805).............. each 329.95CH25470 800 cfm (manual choke) (Edel. # 1812).............. each 369.95CH25503 dual feed fuel line (Edel. # 8132)........................ each 59.95<strong>Edelbrock</strong> <strong>Performer</strong> RPMQuadrajet <strong>Carb</strong>uretorSTARTING AT$349.95STAGE I: Rochester carburetors are rebuilt to restore factory performance.They are completely disassembled, and cleaned. The casting plugs aresealed with epoxy to prevent leaks. All circuits are sized and calibrated andchecked for proper jets, primary metering rods and secondary metering rods.They are then reassembled using the highest-quality components with a newfloat, choke pull off and bronze-bushed throttle shafts.STAGE II: has all the features of Stage I plus fully recalibrated idle, off-idle,main, accelerator pump and high-speed circuits to match engine modificationssuch as intake, headers, ignition or cam changes. This carburetor featuresimproved idle, instant throttle response and maximum torque and horsepowerfor street or strip.C990114 70-77 stage I..................................................... each 349.95C990115 70-77 stage II.................................................... each 359.95<strong>Edelbrock</strong> Q-Jet <strong>Series</strong> <strong>Carb</strong>uretor$513.95This is a street legal carburetor that is also legal for IHRA Stock and SuperStock classes. Electric choke, 850 CFM carb for 500+ horsepower engineswith large, spread-bore manifolds. Calibrated for use with the <strong>Performer</strong> Q-Jetmanifold. Has a .149"-diameter needle and seat assembly to provide enoughfuel flow to support high horsepower engines. One totally unique feature is anadjustable cruise air/fuel ratio for part throttle calibration.CH23727 (Edel. # 1910)..................................................... each 513.95$505.95This 795 CFM carburetor was designed for 1975-85 305-454 vehicles with hotair style choke. 50-state legal, engineered and calibrated to stock specs. Hasall required vacuum ports. Terrific design for drivability and optimum fuel economy.CH23728 (Edel. # 1903)...................................................... each 505.95NOTE: Not compatible with stock egr or computer controlled vehicles.157
Change language