Product Catalog

Serial Connection for the Next Generation Lighting ControlsEquipment NeededANext GenerationConnectivityDABCDEFET70000 Series TimerET7232M/M1 Serial Interface (M1 – no gasket)Free Software Download at www.intermatic.comHandy Box and mounting hardwareDB-9 Serial Cable Male to FemaleComputer to run software – PC or LaptopMust have 9-pin Serial output** Application Note: USB to serial converters do notoperate correctly with this device. If the laptop doesnot have a 9-pin serial output, a PCM card is availablefor Type II/III card slots. The PCM card is supplied witha cord to connect to the serial (RS232) cable, item E.Tested and recommended: Model JJ-PCMO12 by SIIG,Inc., Fremont, CA 94538-3152.Network Connection for the Next Generation Lighting ControlsEquipment NeededA ET70000 Series TimerB ET7232M/M1 Serial Interface(M1 – no gasket)C Free Software Download at www.intermatic.comD Handy Box and mounting hardwareE DB-9 Serial Cable Male to Female(null modem cable or serial printer cable)AF Ethernet to Serial Converter*RS232/IEEE 488 ConverterG Local Area Network(hubs, cables, et al)H Computer to run software* Available at http://bb-elec.com/ part number ESP901 or other suppliers.BEC & FDBEFGC & HEnergy ControlsJumper Pin numbers10 9 8 7 65 4 3 2 1CN5 Jumpers:PC Cable Modem Cablestraight through cable Nul-modem cable1 to 2 1 to 66 to 7 2 to 78 not jumpered 8 not jumpered4 to 9 4 to 95 to 10 5 to 10BET7232M/M1 Serial InterfaceCN5CN7CN1CN6CN2CN3Connection point forpatch cord to timeswitchCN2Note: Use patch cord suppliedwith this piece of equipment. Ifa longer patch cord is required,duplicate the wiring polarity ofcord supplied with this device.Patch cord may be up to 1,000feet long under normal electricalconditions. Be sure to use thetorroid coil supplied with thisunit at the timeswitch end of thepatch cord.For 1 & 2 circuit time switches onlyCircuit # 1 override terminals (CN6)Circuit # 2 override terminals (CN7)www.intermatic.com43