19.11.2012 Views

marine corps uniform regulations - US

marine corps uniform regulations - US

marine corps uniform regulations - US

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

MARINE CORPS UNIFORM REGULATIONS 8005<br />

8004<br />

8004. MARINE CORPS JUNIOR RESERVE OFFICERS TRAINING CORPS MEMBERS<br />

1. Members of the MCJROTC will wear the <strong>uniform</strong> and insignia according to<br />

these <strong>regulations</strong>, and as amplified by MCO P1533.6.<br />

2. All cadets, regardless of rank, will wear the 9/16-inch wide scarlet<br />

stripe on the blue trousers/slacks.<br />

3. A distinctive MCJROTC round patch will be worn on the left sleeve of all<br />

outer clothing except the service sweater and AWC. It will be centered on<br />

the outer half of the sleeve, 1/2 inch below the shoulder seam. The patch<br />

will be 3 inches in diameter and contain a gold Marine Corps emblem centered<br />

on a scarlet field, which is surrounded with a blue border containing the<br />

words "<strong>US</strong> Marine Corps Junior ROTC" in white lettering. A gold border<br />

surrounds the blue field.<br />

4. In addition to the required distinctive patch, one school patch may be<br />

worn on the right sleeve of all outer clothing, except the service sweater<br />

and AWC, centered on the outer half of the sleeve, 1/2 inch below the<br />

shoulder seam. Sample patches will be submitted to the Commanding General,<br />

Training and Education Command (46JR), Quantico, VA for approval, and if<br />

approved, will be procured at other than Marine Corps expense. Patches will<br />

be from two inches to 2-1/2 inches in length or diameter. Normally only<br />

Marine Corps or school colors will be approved for use in school patches.<br />

8005. CIVILIANS SERVING WITH MARINE CORPS UNITS<br />

1. When authorized by CMC, U.S. civilian technicians serving with the Marine<br />

Corps may wear the Marine Corps service and utility <strong>uniform</strong>s except that no<br />

distinctive grade, <strong>corps</strong> device, or other Navy or Marine Corps insignia will<br />

be worn. Plain buttons of the approximate size and color of the buttons<br />

prescribed for the Marine Corps <strong>uniform</strong>s will be worn on all coats.<br />

2. The insignia as described below will be worn on these <strong>uniform</strong>s by<br />

civilian technicians:<br />

a. Breast insignia will be worn on the left-breast pocket of all coats<br />

and khaki shirts. The breast insignia will consist of an embroidered spread<br />

eagle facing dexter with a group of tools clutched in the left claw and an<br />

olive branch in the right claw. The lettering "U.S. TECHNICIAN" will be<br />

centered immediately below the eagle. The insignia will be placed on a 3-1/4<br />

-inch square background material of the same color as the coat or shirt.<br />

b. Cap insignia will be worn on the garrison cap. The insignia shall be<br />

worn on the left side 2 inches from the front edge and 1-1/2 inches from the<br />

bottom edge. The garrison cap insignia shall consist of a 5/8-inch by 3/4inch<br />

gilt pin with the inscription "U.S. TECHNICIAN."<br />

c. Collar insignia will be worn on both sides of the collar of the khaki<br />

shirt and the utility coat, with the center of the insignia 1 inch from the<br />

front edge, and 1 inch from the upper edge of the collar. The collar<br />

insignia is identical to the garrison cap insignia described above.<br />

8-11

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!