19.11.2012 Views

marine corps uniform regulations - US

marine corps uniform regulations - US

marine corps uniform regulations - US

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

MARINE CORPS UNIFORM REGULATIONS<br />

"<strong>US</strong>MC"/emblem decal according to previously published instructions may be<br />

worn until they become unserviceable.<br />

4. Name/service tapes will be worn on the utility <strong>uniform</strong> as prescribed in<br />

paragraph 3032.<br />

5. The camouflage utility coat will be worn outside the trousers. Sleeves<br />

may be rolled up at the option of local commanders. When authorized, utility<br />

sleeves will be rolled with the inside out, forming a roll about 3 inches<br />

wide, and terminating at a point about 2 inches above the elbow. When combat<br />

boots are worn, the trousers will be bloused in a neat <strong>uniform</strong> manner. When<br />

utility <strong>uniform</strong>s are prescribed for parades, reviews, and ceremonies, the<br />

helmet with camouflage cover may be prescribed.<br />

6. On the camouflage utility coat and trousers the replacement of pocket<br />

flap buttons with hook-and-pile ("Velcro") fasteners at the option and<br />

expense of the individual is authorized. These <strong>uniform</strong>s will meet minimum<br />

requirements; however, commanders will not mandate the use of hook-and-pile<br />

fasteners.<br />

7. The camouflage utility cap will be machine or hand laundered in warm<br />

water. It may be starched or sized but may not be bleached. The woodland<br />

style camouflage utility cap may be worn with any authorized style camouflage<br />

<strong>uniform</strong>.<br />

8. When the helmet is worn with utilities, the pocket size iron-on emblem of<br />

the Marine Corps decal will be centered on the front of the helmet cover.<br />

With the helmet cover removed from the helmet, the bottom of the emblem will<br />

be placed approximately 2 inches up from the front seam, taking care to avoid<br />

placing the emblem over any of the open slits in the helmet cover material.<br />

The emblem will not be worn by recruits undergoing training. Local<br />

commanders may direct placement of the emblem on desert helmet covers only if<br />

it is expected that desert utilities will be worn at least 60 days.<br />

Improperly ironed-on decals will not render the helmet cover unserviceable.<br />

3038. COMBAT UTILITY UNIFORM<br />

3038<br />

1. The combat utility <strong>uniform</strong> should be loose fitting and comfortable.<br />

Items should be fitted loosely enough to allow for some shrinkage without<br />

rendering the garment unusable. No items of desert and woodland camouflage<br />

patterns will be mixed. Care of the combat utility <strong>uniform</strong> will observe<br />

guidance provided in paragraph 10104.<br />

2. Name/service tapes will be worn on the combat utility <strong>uniform</strong> as<br />

prescribed in paragraph 3032, with the exception that name/service tapes will<br />

be placed immediately above and slanted parallel with the top of the slanted<br />

chest pockets flaps. The background of the name/service tapes is of the same<br />

fabric and print as the <strong>uniform</strong> itself.<br />

3. The combat utility coat will be worn outside the trousers. When<br />

authorized by the commander, sleeves will be rolled with the inside out,<br />

forming a roll about 3 inches wide, and terminating at a point about 2 inches<br />

above the elbow. When combat boots are worn, the trousers will be bloused in<br />

a neat <strong>uniform</strong> manner. When the combat utility <strong>uniform</strong> is prescribed for<br />

3- 37

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!