5 years - Sill Lighting

Light source LEDOn principle, a distinction canbe made between three kindsof LED light sources. WILAemploys all three LED lightsources depending on theproduct and its intended use.LED modulesLED modules are standardsolutions that exhibit differentcharacteristics depending on therespective manufacturer. Thelarger Downlight and the smallerspot module have prevailed.An optical distinction is madebetween versions with „remotephosphorus“, in which the phosphorusdisc is arranged aboveblue LEDs, and versions with„indiviudal LEDs“, in whichindiviudal LED chips are openlyarranged in one module.Product family:E Connect Nero AccentLED arraysLED arrays are the smallerversion of the LED modules.Blue LED chips are arranged ona relatively small printed circuitboard, which is then completelycoated with phosphorus. LEDarrays provide a high light fluxtogether with compactdimensions.Product family:Tentec LEDSingle LEDsIndividual LEDs cannot be directlyactivated, they must be arrangedfirstly on a carrier circuit board.This realisation demands a greatdeal of development effort bythe manufacturer of the lamps.However, this is compensatedby the greatest possible flexibilityand individuality offered.Product family:E Connect Nero PowerE Connect Nero Accent WallandFloor recessed LuminairesE Connect ExilumE Connect ExilumOptic module Multispot 9with lens reflector units fordifferent beam spread angleswww.wila.com 153