SAM4s SPS-500 series programming manual.pdf

Check Key Program NoteCOIN CHANGER PORT# (0-4)Enter the number of the serial port to which the coin changer is attached.Currency Conversion Key Program NotesRATEThe value of foreign currency can be express in two ways: foreign currency in US dollars, and theinverse, US dollars in foreign currency. For example a Canadian dollar may be worth $.70 US. Theinverse of that value statement would be that a US dollar is worth $1.428571 Canadian dollars. Look forthe rate expressed as US dollars in foreign currency (i.e. $1.428571 as in the example above) and enterthat value in this field. Note: this field can contain 8 digits, with the decimal in any position. Forexample, you can enter 4 digits, the decimal, and four fractional digits.CHANGE IN FOREIGN CURRENCYSelect whether any change from an over-tender is issued in foreign currency (Y) or home currency (N).LINKED DRAWER # (0-3)Select the drawer to be opened on foreign currency tender transactions.Destination (1-10) Key Program NotesKP PERIOD OVERRIDE (0=NO OVER)Entry of a KP Group here allows kitchen printer routing based upon destination (Eat-in/Take-out/Drivethru). Selection of a KP Group here would also override KP Time Period programs. Enter 0 for nooverride.KP Routing Key Program NoteROUTING PERIOD ISThe KP ROUTING key is used to override KP Time Period control. For example, a restaurant mightnormally operate two kitchens at one time and one kitchen at other times. In case the volume of businesschanges, the manager might want to control the KP routing manually. Also, a single item, or large ordermight be required to be sent to a different printer than normal. Select STAYDOWN, TRANS(transaction), POP UP or ITEM POP up operation.Miscellaneous Tend Key Program NotesCOIN CHANGER PORT# (0-4)Enter the number of the serial port to which the coin changer is attached.CONNECT EFT TERMINALSelect Yes if DataTran is connected for integrated payment operations.KEY ISSelect CREDIT, DEBIT or GIFT to indicate integrated payment function of the key.CONNECT TO EFT ON RECD ACCTAllows a deposit to be taken by electronic payment methods. When used with the charge posting featurethe user will now be able start a sale by authorizing for an amount on a credit card.98 P Mode Programming SPS-500 Program Manual v1.13