SAM4s SPS-500 series programming manual.pdf

PLU Minimum StockYou can enter minimum inventory levels for PLUs with stock status. (The PLU must be linked to a PLUStatus Group with option# 16 Stock PLU? set to YES.) When the level of a stock item falls below theminimum inventory level set here, the item will appear on the PLU MINIMUM STOCK report. Optionally, awarning “BELOW MINIMUM STOCK” can display when if the PLU is registered and stock is below theminimum level. (See SYSTEM OPTIONS, GENERAL FUNCTION OPTION #57 to activate the warning.)When multiple registers are installed, stock count is checked by IRC at each stock item registration.1. From the P mode menu touch PLU to view the PLU program selection window.2. Touch PLU MINIMUM STOCK.3. Use the PLU Select screen to find the PLU you wish to adjust.4. Touch the minimum stock value, and then enter minimum stock value. Use the decimal key to enterwhole or partial unit values.Non-PLU CodeThe NON-PLU Code program must be set if you wish to scan UPCs (using the EAN 13 code) with embeddedprices or weights.Within the EAN 13 code, the first two digits (part a) are used as an identifier and the last digit (part c) is usedas a check digit. The remaining 10 digits (part b) contain the product code and the price (or weight orquantity).a) Identifier021234500250c) Check digitThere are 11 identifier numbers available for non-PLU code programming: “02” and “20” through “29”. Thepurpose of this program is to define the format of the 10-digit part b for each possible identifier. Forexample: The structure of Non PLU identifier “02” can be defined to use 5 digits for the product code and 5digits for the price. The structure of Non PLU identifier “20” can be defined to use 6 digits for the product code and 4digits for the price.To Program Non-PLU codes:b) Product code & price1. Select NON-CODE PLU from the PGM mode MENU to display the NON-CODE PLUPROGRAMMING screen.2. Choose one of the non-PLU identifiers (“02” or “20” through “29”).3. The NON-PLU# PROGRAMMING screen displays for the identifier you have chosen toprogram.4. Use the field definitions below as a reference in filling the fields of this screen.5. Press CLOSE to return to the NON-CODE PLU PROGRAMMING screen.80 P Mode Programming SPS-500 Program Manual v1.13