SAM4s SPS-500 series programming manual.pdf

Printer Driver SelectionsThis program allows you to change the commands for specific printers, or to set up a new printer by usinggeneric (1-5) settings.► Select PRINTER DRIVER SELECTIONS from the S mode PROGRAMMING MENU to display thePRINTER DRIVER SELECTIONS screen.This is used to customize existing printer formats or to add generic printers to the system. There is normallyno need to change this information. The only exception being, printing bitmap images where the initializationcode should be deleted for the appropriate printer.Printer Driver - DefinitionsPRINTER TYPECommon printer types have been defined, ELLIX, SAMSUNG, CITIZEN, EPSON etc. These need nomodification. The system does have some custom printer types available for technicians to allocate theirown settings.PRINTER TASKS: INITIALIZE, COMPRESS, Etc.Leave these setting at default unless specific settings are needed to perform special printing such as bold,underline etc. Refer to printer documentation or consult CRS for additional support.START CODEThis code relates to the printer task and is input from your own printer manual when defining a customprinter.CANCELThis code relates to the printer task and is input from your own printer manual when defining a customprinter.SPS-500 Program Manual v1.13 S Mode Programming 59