SAM4s SPS-500 series programming manual.pdf

(11) REG# HOLDS BACKUP CHECK TRACKING DATAThe four check-tracking files can backed up on a second ECR.(12) REG# HOLDS KP GLOBAL ORDER#The order number printed on kitchen order tickets can be the register number followed by a consecutivenumber or can be held centrally and be a system consecutive number this is referred to as a global ordernumber.(13) REG# HOLDS CLERK INTERRUPT DATAIdentify the register that stores transaction data when the transaction is suspended while another clerkbegins a different transaction.(14) DISPLAY PRINTER ERROR WHEN POLLINGThis controls the response of the ECR when a printer is not available to print a PC activated report. Theoption is default to No to ensure that if a printer is off line the communications will continue.(15) NUMBER OF REGISTER THAT HOLDS THE DATATRANEnter the number of the ECR in the network where the DataTran is connected.(16) MSR IS CONNECTEDSet MSR CONNECTED to DATATRAN if the MSR is connected to the DATATRAN; PDC if the MSRis connected to the PDC; REGISTER if the MSR is connected to the register (internal).(17) PINPAD IS CONNECTEDSelect DATATRAN or PDC.(18) PINPAD KEY TYPESet the PIN encryption method: DUKPT or ROTATE KEY.(19) TRACK# HOLDS DELIVERY TABLEIf using a delivery system, indicate the tracking file number that will be used to keep transactions inputusing the delivery function.The following are used for sending reports via FTP:# NETWORK SETTING?Set to YES for FTP communicationsAUTOMATICLLY GET IP ADDRESS? (DHCP)Set to YES only if you want to get the OP address from the DHCP server. Consult your networkadministrator.IP ADDRESSSet only if using IP Polling.SUBET MASKSet only if using IP Polling.GATEWAYIf connected by router, set to IP Address of Router.DNS SERVERS#1/DNS SERVERS#2If connected to Internet, obtain from your Internet Service Provider (ISP).PC CONNECTION TYPE56 S Mode Programming SPS-500 Program Manual v1.13