SAM4s SPS-500 series programming manual.pdf

Key Relocation Screen—PGM Tab Touch the PGM button to display the keylink options. Select the keylink (screen) you wish toprogram. Note that options are not available for the main screen (keylink #0), you must selectkeylink #001 to #200 to set options.Touch thelocation you wishto program. Aborder willdisplay on theselected location.To apply the key attributes to thesame position is other keylinkscreens, touch the KEY button. Youwill be prompted to enter the rangeof keylinks where you would likethis key applied.In a similar manner, you can assignthe same key shape and color to thesame position on other keylinks.Touch KEY to assign a function, PLU orkeylink to a selected location. (Keyassignment can also be done at the LISTtab.The keylink set here will display afterentries for the initial keylink are satisfiedor the keylink is exited.The keylink set here will display afterentries for the initial keylink are satisfiedor the keylink is exited.Touch multi check ifyou wish to assign thesame attributes to agroup of locations atthe same time. Touchas many positions asyou wish and thenmake your selection.TouchCopy tocopy thekeys on thisscreen to arange ofotherThe DISPLAY BACKGROUNDIMAGE option -- you must alsodownload the image. See “ImageDownloads” on page 33.The value entered in the “number ofchoice” field will determine thenumber of entries before the keylinkis automatically closed. Forexample, if “2” is set here, after 2entries, the keylink willautomatically close.• If the DONE key is enabled andyou set “0” here, unlimited keylinkentries will be accepted. When theDONE key is pressed, the previouskeylink will display.• If the DONE key is enabled andyou wish to advance to the keylinkset in the “FUNCTION LIST KEYLINK” field, set the “NUMBER OFCHOICE:” field to a value of “99”.If YES, the keylink will ask forthe quantity of items.44 S Mode Programming SPS-500 Program Manual v1.13