SAM4s SPS-500 series programming manual.pdf

KEYBOARD TESTThis will test the keyboard.NETWORK PING TESTThis will test a specified network IP address.AGING TESTPerforms a series of system tests in an endless loop. Touch the screen to exit.APPLICATION UPDATETouch APPLICATION UPDATE to initiate an update of the application program by SD card or USBstick. The update application file SPS500 must reside in the SPS500 folder on the memory device card.See Application Upgrade/Backup from SD/USB” on page 28 for detailsMemory ClearingThe Memory Clear selection allows you to selectively clear various areas of the SPS-500 memory.► Touch MEMORY CLEAR from the S MODE MAIN MENU to display the S mode MEMORY CLEARScreen.Memory Clear Options(1) RESET ALL TTLS, CNTS & GRAND TTLSThis will remove any sales from the reporting memory, clearing all totals, including grand totals.(2) CLEAR TOTALS AND COUNTERSThis will clear all sales totals from the reporting memory, excluding grand totals.(3) CLEAR GRAND TOTALS ONLYThis will clear grand totals only, excluding all other sales totals.(4-7) CLEAR ORDER TRACKING 1 - 4This will clear the open checks, setting the balance to zero. The PLU sales are still retained for that checkon the financial and product reports. This must be done on the ECR set by S Mode options.(8) CLEAR PAID RECALLThis is reset the memory for displaying paid transactions, the information will begin storing again.(9) CLEAR PRODUCT PROJECTIONSThis will reset any information held in the product mix, sales projection files, which store the productusage, period projection analysis.(10) CLEAR TIME-KEEPINGThis will reset employee time clock information, remove all hours worked totalizers and labor costing.(11) CLEAR CLERK INTERRUPTThis will remove any sales currently open against an employee.(12) CLEAR PRE-POLL STATUS FLAGSPS-500 Program Manual v1.13 S Mode Programming 37