10.07.2015 Views

SAM4s SPS-500 series programming manual.pdf

SAM4s SPS-500 series programming manual.pdf

SAM4s SPS-500 series programming manual.pdf

SHOW MORE
SHOW LESS

Create successful ePaper yourself

Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.

Capturing <strong>SPS</strong>-<strong>500</strong> ScreensEquipment Required <strong>SPS</strong>-<strong>500</strong> Terminal USB Keyboard SD Memory Card or USB Memory StickNOTE: SD cards must be formatted as FAT 32. To avoid compatibility issues, CRS recommendsthat you purchase SD cards from CRS.SD Memory Card Reader or open USB portScreen Capture Procedure1. Set P Mode System Option-General Function Option #14 “Silent Key Depression” to NO.2. Connect a USB Keyboard to one of the USB ports.3. Insert a SD Memory Card into the SD slot at the front/inside of the printer compartment, or insert aUSB memory stick in an open USB port.4. Navigate to the screen you wish to capture.5. Press the F5 key on the keyboard. An audible “beep” is heard when the key is released. After a delaythat may last several seconds, the screen capture confirmation dialog box momentarily displays andcloses. Do not proceed until the confirmation displays.6. If you wish to capture multiple screens, press F5 for each screen you wish to capture. Be sure to waituntil the confirmation dialog displays before attempting another screen capture or operation.7. When you have completed screen captures and wish to save them to the SD memory card, press andrelease the F9 key on the keyboard (an audible “beep” is heard when the key is released).Alternatively, press and release the F10 key to copy the screen capture to a USB memory stick. Thecopy dialog box momentarily displays and closes. All captured screens are copied to thesps2000capture folder on the memory card. (If you are saving screen captures to the SD/USB for thefirst time, the <strong>SPS</strong>-<strong>500</strong> will create the sps<strong>500</strong>capture folder automatically.) After captures are copiedto the SD card, press F7 on the keyboard to erase the captures from the ECR memory.Screens are automatically saved in the .png image format and named using the following convention:20091017054251.pngYearDate6-digit time of capture: HHMMSS8. Remove the SD/USB from the <strong>SPS</strong>-<strong>500</strong> terminal and insert at the PC. You can copy the capturedscreens to your hard drive, or insert them as needed into Microsoft Office documents.30 Software Installation & SD Utilities <strong>SPS</strong>-<strong>500</strong> Program Manual v1.13

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!