SAM4s SPS-500 series programming manual.pdf

More documents

Recommendations

Info

Required Support ResourcesA PC with a SD Memory Card reader or a USB memory stick. The SD/USB memory provides themost convenient method of updating the SPS-500 application software and also can be used forprogram loading/saving, capturing SPS-500 screens for documentation purposes and transferringbitmap images to the SPS-500. (CRS supplies SD cards/readers: P/N 520004 - SanDisk SD 512mbcard; P/N 520002 - SanDisk Mobilemate SD+ 5-N-1 card reader/writer, P/N 520005 USB 2gb, P/N5200026 USB 512mb.)NOTE: SD cards must be formatted as FAT 32. To avoid compatibility issues, CRS recommendsthat you purchase SD cards from CRS.Download the appropriate files from the SPS-500 dealer support page at www.crs-usa.com.SPS-500 Program ComponentsIn most cases, the application program will be the only program that will require updating.1. Application Program – This program will be frequently updated as features and operations arechanged. (Do not confuse the application program with the end-user program, which consists of thefiles and setting prepared for an end user installation.)2. MICOM – The MICOM is supported by it’s own flash memory. MICOM controls LCD brightness,touch screen, buzzer and MSR. It is anticipated that this program area will remain stable. You will benotified in the case that this program changes.3. The Boot Area program is executed on power-on. It initializes hardware and loads the OS (Linux) tomain memory. It is anticipated that this program area will remain stable. You will be notified in thecase that this program changes.4. KERNAL version 1.00 and RAMDISK version 1.00. You will be notified in the case that theseprograms change.How to Verify Software Versions1. Turn the key lock to the S position. (Note: the application version can be displayed by touching theX/Time (@/For) key in R position.)2. From the S Mode menu, touch Self Test and then touch version. The Version screen Displays:3. Review the version information displayed. Touch CLOSE to exit.24 Software Installation & SD Utilities SPS-500 Program Manual v1.13
How to Access System Menu1. Turn the power switch located on the right side of the register to the OFF position.2. Turn the control lock to the S position. (S is the unmarked position one position clockwise from thePGM position.)3. Press and hold the key position where the CASH key is located on the default keyboard layout.789TND14 5 6 CHECK1 2 3 SBTL0 00. CASHTO ACCESS SYSTEM MENUPress and hold this key positionduring power-up in S Mode.4. Continue to hold the default CASH key location while turning the power switch to the ON position.Hold the key until a short double-beep is heard.5. Press the upper left key of the keyboard, then the lower left key, then the upper right key, and finallypress the lower right key.13246. There will be a short delay and the display will monitor a memory check. When complete, SystemPassword screen displays:7. Touch 1 2 8 7. The System Menu screen displays.SPS-500 Program Manual v1.13 Software Installation & SD Utilities 25
Page 4 and 5: 1-2 Servicing PrecautionsWARNING: F
Page 6 and 7: Memory Clearing....................
Page 8 and 9: 8 Contents SPS-500 Program Manual
Page 10 and 11: Safe OperationDo not locate your SA
Page 12 and 13: Controls & ConnectionsThe Power LED
Page 14 and 15: Connection PanelStandard ports incl
Page 16 and 17: Default Screen LayoutMain ScreenUp
Page 18 and 19: P Mode Main MenuNote: P Mode Menu b
Page 20 and 21: Custom Screen LayoutsAfter your aut
Page 22 and 23: 6. The display will monitor the mem
Page 26 and 27: Diagnostics/Functions Available for
Page 28 and 29: Application Upgrade/Backup from SD/
Page 30 and 31: Capturing SPS-500 ScreensEquipment
Page 32 and 33: Image Download Using SD Memory Card
Page 35 and 36: S Mode ProgrammingS- Mode Programmi
Page 37 and 38: KEYBOARD TESTThis will test the key
Page 39 and 40: Memory AllocationCAUTION: The proce
Page 41 and 42: (16) PROJECTIONSThe Product Project
Page 43 and 44: Key Relocation Screen—Screen Tab1
Page 45 and 46: Key Relocation Screen—Design TabS
Page 47 and 48: 145 MODIFIER 10146 Reserved147 #/NO
Page 49 and 50: EMPLOYEE (1-10) 041-050The EMPLOYEE
Page 51 and 52: PAID OUT 1-5 151-155Touch a PAID OU
Page 53 and 54: TAX SHIFT 1-6 225-230Use to shift t
Page 55 and 56: System OptionsThis section is used
Page 57 and 58: Select SERIAL or ETHERNET.PC CONNEC
Page 59 and 60: Printer Driver SelectionsThis progr
Page 61 and 62: CUTTING AFTER PRINTINGWhen a printe
Page 63 and 64: Password NotesThe correct password
Page 65 and 66: 4. The SRAM BACKUP (SD) dialog box
Page 67 and 68: FTP TransmissionChoose FTP Transmis
Page 69 and 70: P Mode ProgrammingP Mode Programmin
Page 71 and 72: PLU Add & Change1. From the P mode
Page 73 and 74: PRODUCT MIX #1This works in-conjunc
Page 75 and 76:
PLU Status GroupPLU Status Groups a
Page 77 and 78:
(16) STOCK PLU?Choose Yes if you wi
Page 79 and 80:
(42) ELIGIBLE FOR CANADIAN DONUT LA
Page 81 and 82:
NON-PLU Code Field DefinitionsLENGT
Page 83 and 84:
Age Verification by Card Swipe(Cali
Page 85 and 86:
3. Once PLUs are added they will be
Page 87 and 88:
10. Touch ADDType the descriptor: C
Page 89 and 90:
Format of Automatically Created Scr
Page 91 and 92:
PLU GroupGroups are designated to a
Page 93 and 94:
Function Key Program SummaryDescrip
Page 95 and 96:
DescriptorManagerRequiredHALO(RATE)
Page 97 and 98:
DescriptorManagerRequiredHALO(RATE)
Page 99 and 100:
Modifier Key Program NotesAFFECT DI
Page 101 and 102:
System OptionsOptions are sorted by
Page 103 and 104:
(10) ROUNDING SYSTEMUse these optio
Page 105 and 106:
(42) BASE CURRENCYSet for local cur
Page 107 and 108:
(62) USE STOCK LINK PLU ON PLU PGMC
Page 109 and 110:
(9) OPEN DRAWER DURING CASH DECLARA
Page 111 and 112:
(4) SELECT HELD ITEMS ON RECALLItem
Page 113 and 114:
(5) COMBINE LIKE ITEMS ON KP OR KVS
Page 115 and 116:
(8) DISPLAY RUNNING SUBTL ON POLEAl
Page 117 and 118:
(33) NOT PRINT AN ALPHA TEXT MESSAG
Page 119 and 120:
Report Options(1) ONLY TTL ON PRODU
Page 121 and 122:
If Yes, the percentage entered here
Page 123 and 124:
EmployeeThe employee file contains
Page 125 and 126:
EDIT JOB CODESNote: An employee wit
Page 127 and 128:
(30) ALLOW PLU QUICK REGISTER?(31)
Page 129 and 130:
ReportsUse this program to create a
Page 131 and 132:
TimeTime period definitions and tim
Page 133 and 134:
Product & IngredientNOTE: Be carefu
Page 135 and 136:
Product Mix Group Time PeriodsMemor
Page 137 and 138:
# OF NON-REPEAT BREAKSEnter the num
Page 139 and 140:
NO. DESCRIPTION43 NOT DISCOUNTABLE4
Page 141 and 142:
Default System DescriptorsNO DESCRI
Page 143 and 144:
CASH DECLARATION REQUIREDCash decla
Page 145 and 146:
NOT DISCOUNTABLEThe preceding entry
Page 147 and 148:
Printer & KV RoutingThe printing sy
Page 149 and 150:
NOTE: All registers are updated wit
Page 151 and 152:
File ManagementUtilities available
Page 153 and 154:
AppendixReport Function Key Report
Page 155 and 156:
45 Checks for Current Employee X1 &
Page 157 and 158:
Glossary of TermsActivity CountThe
Page 159 and 160:
Currency ConversionUse one of the 5
Page 161 and 162:
Keyboard LevelEach keyboard level i
Page 163 and 164:
PromoThe PROMO operation allows ite
Page 165 and 166:
Index##/NO SALE 50, 95%%1 - %10 51,
Page 167 and 168:
TAX EXEMPT 52, 96Tax Options 107TAX
show all

SAM4s SPS-500 series programming manual.pdf

Create successful ePaper yourself

Delete template?

Save as template?