SAM4s SPS-500 series programming manual.pdf

KeylinksThe main screen provides up to 24 programmable locations. In addition to the main screen you can define199 additional 24-location screens referred to as “Keylinks”. (Note that the default program pre-defines thefirst 10 keylinks for PLU lists and various function lists.)In the example depicted below, the PLU List keys and the Payment key open new Keylink Screens.More about Keylinks Keylinks have multiple uses. Typically they will be used to display condiments, instructions oroptions for an item registered from the main keyboard. They may also be used to organize functionkeys such as discounts or type of payment keys. Keylinks can display any combination of PLU keys (menu items or condiments) or function keyssuch as % keys, media keys, etc. Keylinks can be opened (displayed) by touching a key on the main keyboard or by touching a key onanother Keylink. Keylinks can also be opened automatically after the entry of a PLU item (see PLUProgramming). Keylinks can be programmed to remain open for unlimited entries, with the DONE key used to closethe Keylink screen, or can be programmed to close automatically after a set number of entries arecompleted.SPS-500 Program Manual v1.13 Introduction 19