SAM4s SPS-500 series programming manual.pdf

AppendixReport Function Key Report Code StructureYou can print out reports from the REG position using the REPORT function key. Reports are generated byfirst entering the report code, then touching the REPORT key, i.e:[Report Code] [REPORT]The REPORT key code is #36.Report Code Structure010100The report code example above “010100” generates an X1 Standalone Financial Report.Report # Table1. Enter the 2-digit report number. See the “Report Table” below.2. Enter “0” for X reports; enter “1” for Z reports3. Enter the report level: “1” through “5”4. Enter “0” for standalone reports: enter “1” for IRC reports, (or “2’ to viewIRC for all registers without entering the IRC range).5. Enter the option code, 1-4 digits. See the “Report Option Table” below. Ifno option is selected, enter “0”.NO. REPORT NAME X/Z & REPORT LEVEL IRC01 Financial X1 & Z1 also X5 to Z5 INDIVIDUAL & IRC02 Sales by Time Period X1 & Z1 also X5 to Z5 INDIVIDUAL & IRC03 All PLUs X1 & Z1 also X5 to Z5 INDIVIDUAL & IRC05 PLUs by Group X1 & Z1 also X5 to Z5 INDIVIDUAL & IRC06 PLUs by Group for Selected Group X1 & Z1 also X5 to Z5 INDIVIDUAL & IRC07 Top 20 PLUs X1 to X5 read only INDIVIDUAL & IRCSPS-500 Program Manual v1.13 Appendix 153