SAM4s SPS-500 series programming manual.pdf

ILLEGAL KEY SEQUENCEThe operator has used an illegal key sequence.IN USE!This guest check or clerk number is already open elsewhere in the system. This is also applicable whenthe floating clerk system is activated and the operator is in use on another ECR.INACTIVE!The key pressed is inactive. This message also appears if VOID Mode has been disabled.INPUT QTYQuantity input is required for a condiment WLUKITCHEN PRINTER FAILUREThe kitchen printer has failed to respond. Printing has been re-routed to the designated back-up printer.MANAGER OVERRIDE REQUIREDManager code entry required to override a HALO amount, or other restriction.MANAGER REQUIREDThis operation requires entry of the manager code.MEMORY FULLMemory is full.NEGATIVEThis sale has gone negative. Negative sales are programmed as not allowed.NO CHECK #This message appears when the system cannot find this guest check number.NO DATAPLU cannot be found (does not appear in Register Mode). Usually associated with stock entry on an IRCsystem when the PLU exists in one ECR but not another. On the ECR where the PLU does not exist themessage not found will appear.NO DRAWER!The employee currently signed on is not assigned to a drawer, and is not allowed to perform cash sales, orthe drawer is no longer attached and is required in order to continue.NO MANUAL ENTRYManual entry is not allowed (scale function).NO PAPERSlip printer is out of paper, appears when printing to a loose-leaf printer.NO PLU!The number entered is not a valid PLU. This message will also appear if a PLU number “built” usingmodifier keys recalls an invalid PLU number.NONADD# REQUIREDThis operation requires the entry of a Non-Add number to fulfill the compulsory requirements.144 P Mode Programming SPS-500 Program Manual v1.13