SAM4s SPS-500 series programming manual.pdf

Recipe TableHere you assign ingredients to a recipe. If a PLU is linked to a recipe, PLU activity will cause the inventoryof ingredients used in the recipe to decrement. Each recipe can use up to 20 ingredients.1. From the PGM mode PROGRAMMING MENU touch PRODUCT & INGREDIENT to view thePRODUCT & INGREDIENT selection window.2. Touch RECIPE TABLE to access the RECIPE PROGRAMMING screen. .3. Refer to the notes that follow.4. Touch CLOSE to exit the program.Recipe Table Program NotesING/RECIPEChoose whether this line corresponds to an INGredient or a RECIPE. (A recipe may be composed ofrecipes. For example, a special sauce (a recipe) may be an ingredient of a sandwich recipe.)#Enter the 3-digit number of the recipe or ingredient.DESCRIPTORDisplay only. When a recipe or ingredient number is entered, the corresponding descriptor displays.QTYEnter the amount of inventory items used in the recipe, i.e. 1 patty for a regular hamburger, or 2 pattiesfor double hamburger.Product Mix ItemsProduct Mix items are can be inventoried as they are purchased. For example, a box of burger patties.Product Mix Item Program NotesDESCRIPTOREach product mix group item can have a 12 character alpha descriptor.PCS\UNITEnter the number of pieces in the unit. For the example shown, 120 burgers to the case- Enter 120; 30cups to the sleeve- Enter 30.UNIT@Enter a 4 Character descriptor for the unit, using the Alpha-keyboard overlay. This descriptor is forreport purposes.134 P Mode Programming SPS-500 Program Manual v1.13