SAM4s SPS-500 series programming manual.pdf

EDIT JOB CODESNote: An employee with the appropriate authority level must be signed on to perform job codeprogramming.Job codes are used to break down the hours worked for all employees into different categories (See"Labor Groups" report in the Operation Manual.) A breakdown of hours by job is also reported for eachemployee (See "Time Keeping" reports in the Operation Manual.)The job codes to be used by all employees are set up here. There are 20 possible job codes. Each jobcode you wish to activate must be given a descriptor here.EDIT PAY RATESNote: An employee with the appropriate authority level must be signed on to perform pay rateprogramming.All employees can use the pay rates set here. There are up to 50 pay rates.DALLAS KEY LINKThis option is not currently available.SALES AREA POSITIONThis selection controls the location of the transaction area of the screen.If LEFT: the 24-programmable locations are located at the left of the screen and the transaction displayarea at the right of the screen.If RIGHT, the 24-programmable locations are located at the right of the screen and the transaction displayarea at the left of the screen.SPS-500 Program Manual v1.13 P Mode Programming 125