SAM4s SPS-500 series programming manual.pdf

More documents

Recommendations

Info

(3) PLU MOD KEYSChoose STAY DOWN, TRANS POP UP, or ITEM POP UP.STAY DOWN: Once chosen, will remain active until the next choice.ITEM POP UP: Choice remains active for the next PLU only, and then returns to the default.TRANS POP UP: Choice remains active for the remainder of the transaction, then returns to the defaultwith the transaction is finalized.(4) APPLY MODIFIER TO CODE ENTRY PLUSIf Yes, PLU modifier keys may be used with both keyboard PLU keys and code entry PLUs.(5) MODIFIER OVERWRITES PREV MODIFIERIf Yes, only the last modifier entry will affect the PLU number. Use this setting when a PLU is modifiedonly once, i.e. small/med/large. If No, several modifiers affecting different digit positions could beentered and then affect the PLU registered. For example, size, crust type, and/or toppings could beindicated on pizza items.(6) USE MODIFIER HISTORYIf Yes, multiple modifiers will display in the message line before a main PLU is registered.(7) USE CLERK’S PRICE SHIFT LEVELIf Yes, the price level will be determined by the “Default Price Level” setting in the Employee program.(8) EXIT TO MAIN SCREEN AT DONE KEY ONCEOption is not used.(9) DEFAULT SCREEN (0-200)Select the keylink number that will appear as default in REG mode. (“0” is the main screen.)(10) EXIT TO MAIN SCREEN AT FINALIZATONIf Yes, after finalization the default screen (identified in option #9 above) will display.(11) USE CLERK’S DEFAULT SCREEN LEVELIf Yes, the “Default Screen Level” setting in the Employee program will display after log on.(12) DEFAULT KEYBOARD LEVELSelect the default keyboard level.(13) KEYBOARD LEVELChoose keyboard level STAY DOWN (remains at the selected level until another is selected), TRANS.POPUP (returns to the default level when the transaction is completed) or ITEM POPUP (returns to thedefault level when the item entry is completed).Tracking File Option Definitions(1) AUTOMATIC TRANSFER CHECKIf Yes, the check will be assigned to the last person who posted to the check.(2) CHECKS PAID SLIP IS STUBIf Yes, the PRINT CHECK function produces a guest check with totals only, without item detail.(3) PRINT GUEST CHECKWhen Yes, the guest check will print when the order is paid.110 P Mode Programming SPS-500 Program Manual v1.13
(4) SELECT HELD ITEMS ON RECALLItems may be "held" to temporarily postpone kitchen printing (or display). If Yes, held items areautomatically selected when a check is recalled so they may be sent to the appropriate printers/screens.(5) WARN IF HELD ITEMS AT FINALIZEIf a check with held items is paid, a warning will display.(6) TRACK 2 HOLD CLOSED CHKS FM TRK 1(7) TRACK 4 HOLD CLOSED CHKS FM TRK 3The SPS-500 system does not feature a standard closed check file. However, if you do not require allfour of the available check files, unused tracking files can be utilized to store closed checks as indicatedin options #9 & #10. (See "Memory Allocation " in S Mode Programming.)(8) STARTING CHECK#For each tracking file that you are using, if you are automatically assigning tracking numbers, you canenter the first number of the tracking file to be issued after the check number is reset.(9) CHECK# LIMIT (0=NO LIMIT)Sets the upper limit for the check #. If set to"10", once check #10 is used, the next check will be thestarting check number.(10) RESET CHECK #1)(11) RESET CHECK #1)(12) RESET CHECK #1)(13) RESET CHECK #1)Select when you wish the check number to reset: Z1 FINANCIAL, Z1 OPEN CHECK or NEVER.(14) DISABLE CHECK PRINT ON RECEIPTIf Yes, at tender the guest check will not print on the receipt printer.(15) CHECK PRINTER # (0-40)Identify the printer number of the guest check printer.(16) PRINT BARCODE ON CHECKIf yes, automatically generates barcode based upon the check number. The check can be recalled byscanning the barcode.(17) USE ALPHA CHECK NUMBERIf yes, a customer name can be associated with the order. A keyboard automatically displays for input.The check can be recalled by name or from the check list. Note: this selection applies to all tracking files.(18) CHECK OPEN WITH MCRAllows opening of tracking file by MCR. Select the tracking file to be used.(19) READIf opening check by MCR, select TRACK 1 or TRACK 2.(20) COLUMN OF NUMBER/START/DIGITIf opening check by MCR, Enter the number of the column that the Card number starts and enter thenumber of digits to be read for the Card number.SPS-500 Program Manual v1.13 P Mode Programming 111
Page 4 and 5:
1-2 Servicing PrecautionsWARNING: F
Page 6 and 7:
Memory Clearing....................
Page 8 and 9:
8 Contents SPS-500 Program Manual
Page 10 and 11:
Safe OperationDo not locate your SA
Page 12 and 13:
Controls & ConnectionsThe Power LED
Page 14 and 15:
Connection PanelStandard ports incl
Page 16 and 17:
Default Screen LayoutMain ScreenUp
Page 18 and 19:
P Mode Main MenuNote: P Mode Menu b
Page 20 and 21:
Custom Screen LayoutsAfter your aut
Page 22 and 23:
6. The display will monitor the mem
Page 24 and 25:
Required Support ResourcesA PC with
Page 26 and 27:
Diagnostics/Functions Available for
Page 28 and 29:
Application Upgrade/Backup from SD/
Page 30 and 31:
Capturing SPS-500 ScreensEquipment
Page 32 and 33:
Image Download Using SD Memory Card
Page 35 and 36:
S Mode ProgrammingS- Mode Programmi
Page 37 and 38:
KEYBOARD TESTThis will test the key
Page 39 and 40:
Memory AllocationCAUTION: The proce
Page 41 and 42:
(16) PROJECTIONSThe Product Project
Page 43 and 44:
Key Relocation Screen—Screen Tab1
Page 45 and 46:
Key Relocation Screen—Design TabS
Page 47 and 48:
145 MODIFIER 10146 Reserved147 #/NO
Page 49 and 50:
EMPLOYEE (1-10) 041-050The EMPLOYEE
Page 51 and 52:
PAID OUT 1-5 151-155Touch a PAID OU
Page 53 and 54:
TAX SHIFT 1-6 225-230Use to shift t
Page 55 and 56:
System OptionsThis section is used
Page 57 and 58:
Select SERIAL or ETHERNET.PC CONNEC
Page 59 and 60: Printer Driver SelectionsThis progr
Page 61 and 62: CUTTING AFTER PRINTINGWhen a printe
Page 63 and 64: Password NotesThe correct password
Page 65 and 66: 4. The SRAM BACKUP (SD) dialog box
Page 67 and 68: FTP TransmissionChoose FTP Transmis
Page 69 and 70: P Mode ProgrammingP Mode Programmin
Page 71 and 72: PLU Add & Change1. From the P mode
Page 73 and 74: PRODUCT MIX #1This works in-conjunc
Page 75 and 76: PLU Status GroupPLU Status Groups a
Page 77 and 78: (16) STOCK PLU?Choose Yes if you wi
Page 79 and 80: (42) ELIGIBLE FOR CANADIAN DONUT LA
Page 81 and 82: NON-PLU Code Field DefinitionsLENGT
Page 83 and 84: Age Verification by Card Swipe(Cali
Page 85 and 86: 3. Once PLUs are added they will be
Page 87 and 88: 10. Touch ADDType the descriptor: C
Page 89 and 90: Format of Automatically Created Scr
Page 91 and 92: PLU GroupGroups are designated to a
Page 93 and 94: Function Key Program SummaryDescrip
Page 95 and 96: DescriptorManagerRequiredHALO(RATE)
Page 97 and 98: DescriptorManagerRequiredHALO(RATE)
Page 99 and 100: Modifier Key Program NotesAFFECT DI
Page 101 and 102: System OptionsOptions are sorted by
Page 103 and 104: (10) ROUNDING SYSTEMUse these optio
Page 105 and 106: (42) BASE CURRENCYSet for local cur
Page 107 and 108: (62) USE STOCK LINK PLU ON PLU PGMC
Page 109: (9) OPEN DRAWER DURING CASH DECLARA
Page 113 and 114: (5) COMBINE LIKE ITEMS ON KP OR KVS
Page 115 and 116: (8) DISPLAY RUNNING SUBTL ON POLEAl
Page 117 and 118: (33) NOT PRINT AN ALPHA TEXT MESSAG
Page 119 and 120: Report Options(1) ONLY TTL ON PRODU
Page 121 and 122: If Yes, the percentage entered here
Page 123 and 124: EmployeeThe employee file contains
Page 125 and 126: EDIT JOB CODESNote: An employee wit
Page 127 and 128: (30) ALLOW PLU QUICK REGISTER?(31)
Page 129 and 130: ReportsUse this program to create a
Page 131 and 132: TimeTime period definitions and tim
Page 133 and 134: Product & IngredientNOTE: Be carefu
Page 135 and 136: Product Mix Group Time PeriodsMemor
Page 137 and 138: # OF NON-REPEAT BREAKSEnter the num
Page 139 and 140: NO. DESCRIPTION43 NOT DISCOUNTABLE4
Page 141 and 142: Default System DescriptorsNO DESCRI
Page 143 and 144: CASH DECLARATION REQUIREDCash decla
Page 145 and 146: NOT DISCOUNTABLEThe preceding entry
Page 147 and 148: Printer & KV RoutingThe printing sy
Page 149 and 150: NOTE: All registers are updated wit
Page 151 and 152: File ManagementUtilities available
Page 153 and 154: AppendixReport Function Key Report
Page 155 and 156: 45 Checks for Current Employee X1 &
Page 157 and 158: Glossary of TermsActivity CountThe
Page 159 and 160: Currency ConversionUse one of the 5
Page 161 and 162:
Keyboard LevelEach keyboard level i
Page 163 and 164:
PromoThe PROMO operation allows ite
Page 165 and 166:
Index##/NO SALE 50, 95%%1 - %10 51,
Page 167 and 168:
TAX EXEMPT 52, 96Tax Options 107TAX
show all

SAM4s SPS-500 series programming manual.pdf

Create successful ePaper yourself

Delete template?

Save as template?