SAM4s SPS-500 series programming manual.pdf

(62) USE STOCK LINK PLU ON PLU PGMChoose:STOCK LINK PLU - The linked PLU is the stock link PLU.KP DESCRIPTOR PLU - The linked PLU's descriptor is used for the KP descriptor instead of its owndescriptor. This allows for a secondary PLU descriptor to print on the KP. (For example, this can beused to print Spanish in the kitchen.)LINK PLU - The linked PLU is used the link PLU instead of LINK PLU in PLU status group.(63) DO NOT USE ERROR BUZZER(64) ACTIVATE ROUNDING ON MISC TENDEmploy rounding (as defined in option #10 above) to sales tendered by a miscellaneous tender key.(65) PLU STATUS FOR LABWARE CONDIMENTFor later use with Labware application.(66) PLU STATUS FOR LABWARE COOK LINKFor later use with Labware application.Tax Option Definitions(1) TAX ROUNDING FACTORWhen tax calculations result in a fraction of a cent, you have the option of rounding UP AT .5 ($0.005 orgreater rounds up; less than 0.005 rounds down) or you can choose to round any fractional calculationALWAYS UP or ALWAYS DOWN.(2) VAT SUBTRACTED FROM INDIV PLU TTLSChoose Yes to subtract the VAT tax amount from the PLU totals on the PLU report. If No, the PLUreport total reflects the items price and the value added tax.(3) TAX EXEMPT QTY (CANADA DONUT)Enter the quantity at which you wish tax to be exempted. For example if set at 12, registration of PLUsreported to status groups with eligibility for Canadian donut law selected will charge tax until the quantitywith the transaction reaches 12. When 12 or more are registered, all will be sold without tax. To use thisfeature, you must also set eligibility status for the PLU. See option #42 is “PLU Status Group” on page75.(4) PRINT TAXABLE AMOUNTS ON R/JChoose Yes to print the tax eligible subtotals for each tax on the receipt and/or journal, if printed.(5) TAXABLE STATUS INDICATORS:DISPLAYPRINTIn the default condition (Y), tax eligibility indicators, i.e. T X1 display on the screen and print on printersadjacent to the item. Choose No to selectively remove the indicators from the display and/or print.(6) PRINT TAX AMOUNTS AT TENDERWhen set to No, the tax charged will not print on the receipt (TAX1, TAX2, etc.)SPS-500 Program Manual v1.13 P Mode Programming 107