SAM4s SPS-500 series programming manual.pdf

More documents

Recommendations

Info

Recall Check Key Program NotesDRIVE THRU FEATURE ENABLED?Set to Yes if the tracking file is used for drive thru windows in fast food operations. In this case, therecall key will automatically recall the lowest tracking number from the appropriate tracking file. Note:see Store Check key programming. You must also set the appropriate Store Check key with the drive thruoption enabled. Note: you cannot use alpha check number with a drive thru system.SCAN CHECK#Allows use of scanner to enter check number. Note: If check numbers are assigned by register, theoperator will be prompted to choose SCAN CHECK or OPEN A NEW CHECK when the RECALLCHECK key is touched. Note: P/SYSTEM OPTION/TRACKING FILE OPTIONS/Option #8 must beset to a minimum of 4-digits.Store Check Key Program NoteENABLE DRIVE THROUGH OPTIONSet to Yes if the tracking file is used for fast food operations. In this case, the store key will automaticallyassign the next tracking number from the appropriate tracking file and store the transaction. Note: seethe programming for the Recall Check key. You must also set the appropriate Recall Check key with thedrive thru option enabled.Waste Key Program NoteAFFECT ON PROJECTIONSIf Yes, the projection report will consider actual sale plus waste. If No, the projection report will onlyconsider sales.Alpha Text Key Program NotesIf “USE PREDEFINED ALPHA DESCRIPTOR” option is set to YES, ten predefined options, as well asa “MANUAL REMOTE ENTRY” button are displayed from ALPHA TEXT function key. The“MANUAL REMOTE ENTRY” button allows custom on-the-fly entries.If “DO NOT ALLOW MANUAL” is selected, the user cannot enter on-the-fly instructions.If “ALLOW ON SCREEN ALPHA TEXT MESSAGES” is selected, users can define the 10 pre-definedmessages on-the-fly. In this manner, if a commonly entered PLU or instruction is not available, it can becreated and reused as transactions are entered.100 P Mode Programming SPS-500 Program Manual v1.13
System OptionsOptions are sorted by category to assist the programmer in finding a specific option. Options are referencedby number within each category for reference.1. Select SYSTEM OPTION from the P Mode menu to display the SYSTEM OPTIONPROGRAMMING selection screen.2. Touch the System Option Programming area you wish to access.3. The GENERAL FUNCTION OPTIONS are shown above as an example. Touch the page tabs atthe top of the screen to view all of the options in each area.SPS-500 Program Manual v1.13 P Mode Programming 101
Page 4 and 5:
1-2 Servicing PrecautionsWARNING: F
Page 6 and 7:
Memory Clearing....................
Page 8 and 9:
8 Contents SPS-500 Program Manual
Page 10 and 11:
Safe OperationDo not locate your SA
Page 12 and 13:
Controls & ConnectionsThe Power LED
Page 14 and 15:
Connection PanelStandard ports incl
Page 16 and 17:
Default Screen LayoutMain ScreenUp
Page 18 and 19:
P Mode Main MenuNote: P Mode Menu b
Page 20 and 21:
Custom Screen LayoutsAfter your aut
Page 22 and 23:
6. The display will monitor the mem
Page 24 and 25:
Required Support ResourcesA PC with
Page 26 and 27:
Diagnostics/Functions Available for
Page 28 and 29:
Application Upgrade/Backup from SD/
Page 30 and 31:
Capturing SPS-500 ScreensEquipment
Page 32 and 33:
Image Download Using SD Memory Card
Page 35 and 36:
S Mode ProgrammingS- Mode Programmi
Page 37 and 38:
KEYBOARD TESTThis will test the key
Page 39 and 40:
Memory AllocationCAUTION: The proce
Page 41 and 42:
(16) PROJECTIONSThe Product Project
Page 43 and 44:
Key Relocation Screen—Screen Tab1
Page 45 and 46:
Key Relocation Screen—Design TabS
Page 47 and 48:
145 MODIFIER 10146 Reserved147 #/NO
Page 49 and 50: EMPLOYEE (1-10) 041-050The EMPLOYEE
Page 51 and 52: PAID OUT 1-5 151-155Touch a PAID OU
Page 53 and 54: TAX SHIFT 1-6 225-230Use to shift t
Page 55 and 56: System OptionsThis section is used
Page 57 and 58: Select SERIAL or ETHERNET.PC CONNEC
Page 59 and 60: Printer Driver SelectionsThis progr
Page 61 and 62: CUTTING AFTER PRINTINGWhen a printe
Page 63 and 64: Password NotesThe correct password
Page 65 and 66: 4. The SRAM BACKUP (SD) dialog box
Page 67 and 68: FTP TransmissionChoose FTP Transmis
Page 69 and 70: P Mode ProgrammingP Mode Programmin
Page 71 and 72: PLU Add & Change1. From the P mode
Page 73 and 74: PRODUCT MIX #1This works in-conjunc
Page 75 and 76: PLU Status GroupPLU Status Groups a
Page 77 and 78: (16) STOCK PLU?Choose Yes if you wi
Page 79 and 80: (42) ELIGIBLE FOR CANADIAN DONUT LA
Page 81 and 82: NON-PLU Code Field DefinitionsLENGT
Page 83 and 84: Age Verification by Card Swipe(Cali
Page 85 and 86: 3. Once PLUs are added they will be
Page 87 and 88: 10. Touch ADDType the descriptor: C
Page 89 and 90: Format of Automatically Created Scr
Page 91 and 92: PLU GroupGroups are designated to a
Page 93 and 94: Function Key Program SummaryDescrip
Page 95 and 96: DescriptorManagerRequiredHALO(RATE)
Page 97 and 98: DescriptorManagerRequiredHALO(RATE)
Page 99: Modifier Key Program NotesAFFECT DI
Page 103 and 104: (10) ROUNDING SYSTEMUse these optio
Page 105 and 106: (42) BASE CURRENCYSet for local cur
Page 107 and 108: (62) USE STOCK LINK PLU ON PLU PGMC
Page 109 and 110: (9) OPEN DRAWER DURING CASH DECLARA
Page 111 and 112: (4) SELECT HELD ITEMS ON RECALLItem
Page 113 and 114: (5) COMBINE LIKE ITEMS ON KP OR KVS
Page 115 and 116: (8) DISPLAY RUNNING SUBTL ON POLEAl
Page 117 and 118: (33) NOT PRINT AN ALPHA TEXT MESSAG
Page 119 and 120: Report Options(1) ONLY TTL ON PRODU
Page 121 and 122: If Yes, the percentage entered here
Page 123 and 124: EmployeeThe employee file contains
Page 125 and 126: EDIT JOB CODESNote: An employee wit
Page 127 and 128: (30) ALLOW PLU QUICK REGISTER?(31)
Page 129 and 130: ReportsUse this program to create a
Page 131 and 132: TimeTime period definitions and tim
Page 133 and 134: Product & IngredientNOTE: Be carefu
Page 135 and 136: Product Mix Group Time PeriodsMemor
Page 137 and 138: # OF NON-REPEAT BREAKSEnter the num
Page 139 and 140: NO. DESCRIPTION43 NOT DISCOUNTABLE4
Page 141 and 142: Default System DescriptorsNO DESCRI
Page 143 and 144: CASH DECLARATION REQUIREDCash decla
Page 145 and 146: NOT DISCOUNTABLEThe preceding entry
Page 147 and 148: Printer & KV RoutingThe printing sy
Page 149 and 150: NOTE: All registers are updated wit
Page 151 and 152:
File ManagementUtilities available
Page 153 and 154:
AppendixReport Function Key Report
Page 155 and 156:
45 Checks for Current Employee X1 &
Page 157 and 158:
Glossary of TermsActivity CountThe
Page 159 and 160:
Currency ConversionUse one of the 5
Page 161 and 162:
Keyboard LevelEach keyboard level i
Page 163 and 164:
PromoThe PROMO operation allows ite
Page 165 and 166:
Index##/NO SALE 50, 95%%1 - %10 51,
Page 167 and 168:
TAX EXEMPT 52, 96Tax Options 107TAX
show all

SAM4s SPS-500 series programming manual.pdf

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?